Catalogs >
AMETEK PMT Products >
Series DT-8300 Digital Thermometers

Series DT-8300 Digital Thermometers
4Pages

Catalog excerpts

Temperature Products Series DT-8300 Digital Thermometers DESCRIPTION SPECIFICATIONS The AMETEK DT-8300 Digital Thermometer is a rugged, field instrument designed for dependable, worry-free temperature measurement anywhere in the plant. This unique device can be used with any Type K thermocouple to provide quick, convenient, Model DT-8300 continuous monitoring of liquid and gas processes. The DT-8300 is ideal for use in hard to reach places such as overhead pipes since it can be mounted remotely from the sensor by use of thermocouple extension wire. Four configurations provide for wall, pipe, panel, or stem mounting. The stainless steel housing and one piece VALOX® bezel/face provide a corrosion resistant package for harsh environments. This device performs reliably over a wide ambient temperature range. The large, easy reading LCD display features low power and open sensor indication. A self-powered version is available incorporating commercially available size AA batteries for approximately 1.5 years of continuous operation. An external power model is also available for operation with an unregulated 6 to 28 VDC power supply. The DT-8300 is also inexpensive, priced far less than comparable electronic field temperature instruments. RANGES: Low: -50ºF to 450ºF (-50ºC to 250ºC); High: 400ºF to 1500ºF (200ºC to 800ºC) INPUT: Type K thermocouple; supplied by U.S. Gauge distributor or customer, Type J and E inputs also available ACCURACY: Basic Accuracy: ±1% of full scale (excluding T/C error) Conformance (to ANSI MC95-1): Low Range: ±2.2ºF (1.2ºC) from –40ºF to 450ºF High Range: ±2.7ºF (1.5ºC) from 400ºF to 1500ºF Cold Junction Compensation And Zero Drift: .08 degrees (F or C) Span Drift: .008% of reading/ºF (0.015% of reading/ºC) Resolution: 1ºF (1ºC) CALIBRATION ADJUSTMENT: Screw adjust permits calibration to within 1ºF (1ºC) at any desired point OPERATING TEMPERATURES: -13ºF to 160ºF (-25ºC to 72ºC), depending on power supply SELF-POWERED VERSION: Battery, 8 Size AA: 1-1/2 years continuous operation, typical. Note: Ambient temperatures above 100ºF may shorten battery life EXTERNALLY-POWERED VERSION: Supply Voltage: 6 to 28 VDC (unregulated) Supply Current: 0 to 2.5 mA INTRINSICALLY SAFE (FM APPROVED): Battery powered models are intrinsically safe, for Class I, II, and III, Division 1, Groups A, B, C, D, E, and G hazardous locations using U.S. Gauge battery board (accepts 8 AA batteries, not included) P/N 156834 and when installed in accordance with U.S. Gauge instructions AU-3459-F External powered models are entity approved for safe operation in Class I, II, and III, Division 1, Groups A, B, C, D, E, and G hazardous locations in accordance with U.S. Gauge instructions AU-3459-F V max = 18.7 V, I max = 150 mA, capacitance equals 0.4 µF, Li = 0.0 mH External powered models are also entity approved for safe operation in Class I, II, and III, Division 1, Groups C, D, E, and G hazardous locations in accordance with U.S. Gauge instructions AU-3459-F V max = 26.7 V, I max = 150 mA, capacitance equals 0.4 µF, Li = 0.0 mH DISPLAY: 3-1/2 digit liquid crystal (LCD) 0.7” high numerals; update rate once per second; display blanks out for low power condition and displays large, negative number when thermocouple or extension wires are open HOUSING: NEMA 4X design; 1/4 DIN; 302 stainless steel with one piece, VALOX front face/bezel and neoprene gasket; environmentally sealed with one-way valve for battery venting CONNECTIONS: 1/2-14 NPT stainless steel half couple seal welded to case ALL ORDERS CAN BE SENT TO: On-line fax: 215-323-9450 or e-mail to usg.sales@ametek.com © 2008, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. 908PDF (160166) Sales/Technical Support: 215-257-6531 900 Clymer Avenue Sellersville, PA 18960 U.S.A. Customer Service: 727-536-7831 8600 Somerset Drive Largo, FL 33773 U.S.A. Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.

Open the catalog to page 1

Temperature Products Series DT-8300 Digital Thermometers MODEL SELECTION CHART TEMPERATURE RANGES/TYPE -50ºC to 250ºC/K 400ºF to 1500ºF/K -50ºF to 450ºF/J POWER PACK MOUNTING -50ºF to 450ºF/K (8-AA) Battery FM Approved Field* Panel DT-8311 DT-8312 DT-8321 DT-8322 DT-8331 DT-8332 DT-8351 DT-8352 External Supply FM Approved Field* Panel DT-8315 DT-8316 DT-8325 DT-8326 DT-8335 DT-8336 DT-8355 DT-8356 Model number which appears DT-8310 DT-8320 DT-8330 on front of case DT-8350 * Field mount versions may be stem, wall, and pipe mounted; pipe mounting kit is optional at extra cost Stem, Wall, and...

Open the catalog to page 2

Temperature Products Series DT-8300 Digital Thermometers SPEC NUMBER SELECTION CHART Model Number Size Model Number Size Model Number Size Model Number Size Field mount model used for wall, stem, or pipe mounting c Eight size AA batteries not included O 2008, by AMETEK, Inc. All rights reserved. On-line fax: 215-323-9450 or e-mail to usg.sales@ametek.com Sales/Technical Support: 215-257-6531 Customer Service: 727-536-7831 900 Clymer Avenue 8600 Somerset Drive Specifications are subject to change without notice. Visit our Web site for the most up-to-date information,

Open the catalog to page 3

Temperature Products Series DT-8300 Digital Thermometers SPEC NUMBER SELECTION CHART Sub-Assemblies and Replacement Parts for DT-8300 D83C Main Frame Assemblies (Bezel, Display, and Electronics) Case Assemblies Field Mount for Battery Field Mount for External DC Panel Mount for Battery Panel Mount for External DC Power Packs Battery Board*; * Accepts unregulated 6-28 VDC supply ** Accepts eight size AA batteries (not included) Miscellaneous Accessories spec NO. Pipe Mounting Package 1/la/iRn © 2008, by AMETEK, Inc. All rights reserved. On-line fax: 215-323-9450 or e-mail to...

Open the catalog to page 4