Model IPS-300 UHP Semiconductor Gas Indicating Pressure Switch
4Pages

{{requestButtons}}

Catalog excerpts

Model IPS-300 UHP Semiconductor Gas Indicating Pressure Switch - 1

Product Data ULTRA HIGH PURITY PRESSURE MEASUREMENT PRODUCTS Model IPS-300 UHP Semiconductor Gas Indicating Pressure Switch DESCRIPTION The IPS-300 Ultra High Purity Indicating Pressure Switch is designed to provide economical pressure monitoring with setpoint indication of the high purity, toxic and corrosive gases used in the semiconductor manufacturing industry and gas distribution systems. In addition to providing accurate (±2% of span) indication of gas pressure, this 2 inch diameter instrument incorporates a magnetically actuated, switch capable of operating low voltage annunciators, lights or relays. When used with the appropriate pull-up or pull-down resistors, the monitor can be connected to the input port of a microprocessor or to a logic network. It may also be used as an input to a programmable controller. Moving the colored index on the front dial to the desired set point sets the switch. A small magnet fastened to the indicating pointer actuates the switch. A magnetic latch on the switch permits the switch to remain “on” or “off” after the pointer passes the operating point, without restraint on the indicating pointer. The switch can be factory ordered to close on increasing pressure (HA) or close on decreasing pressure (LA). The switch action will be noted on the tail of the pointer. FEATURES ●● Operates low voltage audible/visual alarms and relays ●● No switch input power required ●● Provides input to logic networks, microprocessors µ inch (0.25 µm) surface finish on VCR face seal connections ●● Helium leak tested to 10-9 scc/sec ●● Available in low mount and center-back mount con- figuration ●● Available with VCR face seal fittings or NPT connec- tions ●● Switch setpoint adjustments accessible from front of monitor, just twist off window ●● Switch setting may be adjusted on or off-line ●● Type 316L stainless steel internal surfaces ●● Case is 304 stainless steel, electropolished with pres- sure relief ●● Cleaned and packaged for ultra high purity gas ap- plications, exceeds ANSI B40.100 The IPS-300 Pressure Switch offers the ease of adjustment and economy that permits field use of several units covering a variety of pressure range set-points. It is also a low cost alternative to analog transducers with A/D conversion for digital input to PLCs and microprocessors. The IPS Pressure Switch provides many advantages over other instruments, including: fast, easy, accurate setting of set points; pressure and setpoint indication on the same dial face; quick, at a glance monitoring of the pressure and setpoint, and substantial cost savings to the end user. Model IPS-300 UHP Semiconductor Gas Indicating Pressure Switch Close-up of VCR connection E-mail: usg.sales@ametek.com Sales/Technical Support: +1 215-674-1234 | 205 Keith Valley Road | Horsham, PA 19044 U.S.A. © 2018, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. 818PDF (160185) Specifications are subject to change without notice. Visit our Web sit

Open the catalog to page 1
Model IPS-300 UHP Semiconductor Gas Indicating Pressure Switch - 2

RoHS COMPLIANT ULTRA HIGH PURITY PRESSURE MEASUREMENT PRODUCTS Model IPS-300 UHP Semiconductor Gas Indicating Pressure Switch SPECIFICATIONS Mechanical Size: 2 inch diameter Ranges (PSI or BAR): Compound: VAC-0-30 psi, VAC-0-60 psi, VAC-0-100 psi, VAC-0-200 psi, VAC-0-300 psi Note: VAC = 30 inches Hg vacuum Gauge Pressure: 0 to 60, 100, 200, 300, 600, 1000, 2000, 3000, and 4000 psi; dual scales are available (consult factory); proof pressure is 130% Internal Surface: Type 316L stainless steel Case: 304 stainless steel, electropolished with pressure relief Window: One piece, threaded...

Open the catalog to page 2
Model IPS-300 UHP Semiconductor Gas Indicating Pressure Switch - 3

Product Data ULTRA HIGH PURITY PRESSURE MEASUREMENT PRODUCTS Model IPS-300 UHP Semiconductor Gas Indicating Pressure Switch LOW MOUNT Swivel Female Face Seal CENTER BACK MOUNT Swivel Female Face Seal Ø 2.30 (58.5) E-mail: usg.sales@ametek.com Sales/Technical Support: +1 215-674-1234 | 205 Keith Valley Road | Horsham, PA 19044 U.S.A. © 2018, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. 818PDF (160185) Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.

Open the catalog to page 3
Model IPS-300 UHP Semiconductor Gas Indicating Pressure Switch - 4

RoHS COMPLIANT ULTRA HIGH PURITY PRESSURE MEASUREMENT PRODUCTS E-mail: usg.sales@ametek.com Sales/Technical Support: +1 215-674-1234 I 205 Keith Valley Road I Horsham, PA 19044 U.S.A. AMETEK' © 2018, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. 818PDF (160185) Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.

Open the catalog to page 4

All AMETEK PMT Products catalogs and technical brochures

  1. 1981

    4 Pages

  2. Model IPS

    4 Pages

  3. Model 40

    9 Pages

  4. Model 742

    2 Pages

  5. Model 742 D

    3 Pages

  6. Model 89

    2 Pages

  7. Model 89D

    2 Pages

  8. Model-DCT

    5 Pages

  9. Model 88C

    3 Pages

  10. PMT LMA

    3 Pages

  11. L serie

    2 Pages

  12. Model LMA

    3 Pages

  13. ECPT10

    2 Pages

  14. Model IDT

    5 Pages

  15. PST360

    2 Pages

  16. Model 656

    5 Pages

  17. 1535 Gauge

    2 Pages

Archived catalogs