Model ACT Analog Compensated Pressure Transducer
4Pages

{{requestButtons}}

Catalog excerpts

Model ACT Analog Compensated Pressure Transducer - 1

Tel: 215-355-6900 www.ametekpmt.com Model ACT steel construction for use with most media types. An economical non isolated brass transducer, used for clean, dry media is optional. The ACT offers premium performance and versatility of use for many applications, both for the general industrial end user and original equipment manufacturers (OEM). It combines precision along with the durability to operate under diffi cult environmental conditions. The ACT is manufactured in the United States under ISO 9001:2000 control. Features Digitally C • ompensated - Low total accuracy errors for interchangeability and high precision measurements. • Multiple Pressure Port Options - Ease of installation and attachment and no adapters required. • Numerous Weatherproof Electrical Connection Options - Quick hook-up and remote applications. • Stainless Steel Construction and Wetted Materials - Resists the corrosive effects of caustic medias or washdowns and compatible with a variety of media. • 0.2% Typical Accuracy - Offers superior accuracy to competitive models and can be used on critical applications. • Factory Calibrated for Pressure and Temperature - No need for fi eld calibration. Plug and play reliability. • Wide Pressure Ranges and Types (PSIG, PSIA, PSIS, Compound) - Can be used in a variety of applications. PSIA and compound units can be used for vacuum to absolute or atmospheric pressures. • Rugged, Compact Design - Easy to package or install. • RFI/EMI Protection - For use in high noise environments. • Reverse Polarity Protection - Installation safety and not damaged by reverse wiring. • Custom Designs Available - Adaptable to special needs. Description The Model ACT builds upon the successful DCT product line by offering an Analog Compensated Transducer with 0 to 100mV output. The Model ACT is ideal for OEM customers that want non-digital outputs into their control system. The Model ACT is available in brass and stainless steel. This product is offered in a variety of mounting options, stainless steel or brass construction, and numerous pressure ranges. It is fully compensated for the effects of pressure and temperature change and calibrated to produce industry standard electrical outputs. The ACT accepts both unregulated and regulated excitation voltages and provides output signals such as 0 to 100mV. The ACT Transducer is offered in pressure ranges from 1 psi up to and including 3000 psi. The Model ACT is extremely accurate, less than ±0.3% full scale over pressure and less than ±1.0% full scale over a wide compensated temperature range (±0.5% full scale optional). The design incorporates a stainless steel isolation diaphragm and 316 stainless Analog Compensated Pressure Transducer

Open the catalog to page 1
Model ACT Analog Compensated Pressure Transducer - 2

Tel: 215-355-6900 www.ametekpmt.com Specifi cations • Pressure Range: Vacuum to 3000 psi • Reference Accuracy (includes repeatability, hysteresis, non-linearity—BFSL): ±0.2% full scale TYP, ±0.3% full scale maximum (consult factory for ranges below 15 psi) • Total Error Band (includes temperature effects and null and span set points): ±1% full scale (±0.5% typical) (consult factory for ranges below 15 psi) • 1 Yr. Stability: <0.25% full scale • Thermal Effect On Null (ACT only): ±2% full scale (±1% typical) TYP over comp range • Thermal Effect On Span (ACT only): ±2% full scale (±1%...

Open the catalog to page 2
Model ACT Analog Compensated Pressure Transducer - 3

Tel: 215-355-6900 www.ametekpmt.com A FIG. 1 18 INCH, 24 AWG SHIELDED CABLE Ø 1.17 (29.7) D FIG. 2 A Ø 1.17 (29.7) D C DIN-A CONNECTOR FIG. 3 DIN-C CONNECTOR A Ø 1.17 (29.7) D A Ø 1.17 (29.7) D FIG. 4 PACKARD CONNECTOR FIG. 5 18 INCH, 24 AWG SHIELDED CABLE A Ø 1.17 (29.7) D Dimensions Model ACT ACT ACT Inches (MM) Drawing/Output Type Brass 316 SST (up to 500PSIG) >500 PSIG All Absolute Ranges FIGURE 1 — CABLE OUTPUT Dimension A 2.46 (62.5) 2.61 (66.3) 2.84 (72.1) Dimension D 7/8 HEX 7/8 HEX 1-1/8 HEX FIGURE 2 — DIN - A OUTPUT Dimension A 1.86 (47.2) 2.08 (52.9) 2.30 (58.3) Dimension C 1.37...

Open the catalog to page 3
Model ACT Analog Compensated Pressure Transducer - 4

820 Pennsylvania Boulevard • Feasterville, PA 19053 • U.S.A. Tel: 215-355-6900 • Fax: 215-354-1802 • www.ametekpmt.com Model Numbering: ACT pressure transducer ACT Analog compensated transducer (mV output only) Pressure type G Gauge pressure A Absolute pressure V Vacuum (use pressure code 0015) S Static pressure (1000, 2000, and 3000 psi ranges) C Compound (-14.7 psi to full scale) Pressure ranges 0001 to 1 psi full scale 0006 to 6 psi full scale 0015 to 15 psi full scale 0030 to 30 psi full scale 0060 to 60 psi full scale 0100 to 100 psi full scale 0150 to 150 psi full scale 0200 to 200...

Open the catalog to page 4

All AMETEK PMT Products catalogs and technical brochures

  1. 1981

    4 Pages

  2. Model IPS

    4 Pages

  3. Model 40

    9 Pages

  4. Model 742

    2 Pages

  5. Model 742 D

    3 Pages

  6. Model 89

    2 Pages

  7. Model 89D

    2 Pages

  8. Model-DCT

    5 Pages

  9. Model 88C

    3 Pages

  10. PMT LMA

    3 Pages

  11. L serie

    2 Pages

  12. Model LMA

    3 Pages

  13. ECPT10

    2 Pages

  14. Model IDT

    5 Pages

  15. PST360

    2 Pages

  16. Model 656

    5 Pages

  17. 1535 Gauge

    2 Pages

Archived catalogs