Catalogs >
AMETEK PMT Products >
Model 88F Flushmount Pressure Transmitter

Model 88F Flushmount Pressure Transmitter
4Pages

Catalog excerpts

Model 88F Flushmount Pressure Transmitter - 1

Tel: 215-355-6900 www.ametekpmt.com Model 88F Features A high-• quality, full featured transmitter at just 1.6 lbs. (720 grams) • Designed to mount fl ush against process media • All welded 316 stainless steel construction (no aluminum) • Standard Hastelloy C diaphragm • Ranges from 0-3 to 0-300 psig (0-.2 to 0-20 bar) • ±0.25% accuracy • Zero and span adjustability • Full 5:1 turndown • 4-20 mA output at 12-40 VDC • FM & CSA explosion proof and intrinsically safe • CENELEC-Approved version available • 316 stainless steel coupling and plug available for mounting and maintenance Description The Model 88F is a durable, full featured, fl ush diaphragm pressure transmitter. It is designed to mount fl ush against process media and to prevent any media particles, such as from paper slurry, from collecting at the diaphragm. Its rugged 316 stainless steel and Hastelloy C construction make it perfect for tough environments and corrosive media conditions. The compact size and weight of the Model 88F transmitter eliminate any complicated mounting hardware and mechanical supports. The integral junction box permits simple fi eld wiring, too. All of this reduces your installation time substantially. And with the cover retained by a stainless steel chain and no internal jumpers for span turndown, losses due to misplaced or dropped parts are eliminated. A 4-20 mA output is standard with a 12-40 VDC power supply. Approvals include FM and CSA for both intrinsic safety and explosion proof ratings: CENELEC approval for intrinsic safety is also available. The Model 88F also meets NACE standards. Flushmount Pressure Transmitter RECEIVER POWER SUPPLY 1/2 NPT CONDUIT TEST TERMINAL (-) SIGNAL TERMINAL (-) ZERO ADJUST SPAN ADJUST TURNDOWN ADJUST SIGNAL TERMINAL (+) TEST TERMINAL (+)

Open the catalog to page 1

Model 88F Flushmount Pressure Transmitter - 2

Tel: 215-355-6900 www.ametekpmt.com Specifi cations Functional Specifi cations • Service: Liquid, Gas or Vapor • Range Limits: 0/3 to 0/15 psi (0/.2 to 0/1 bar) 0/6 to 0/30 psi (0/.4 to 0/2 bar) 0/20 to 0/100 psi (0/1.4 to 0/7 bar) 0/60 to 0/300 psi (0/4 to 0/20 bar) • Output: 4-20 mADC, limited to 30 mADC • Power Supply: 12 to 40 VDC with reverse polarity protection • Loop Resistance: 1400 ohms max @ 40 volts • Turndown: 5:1 • Zero Adjust: ±10% • Span Adjust: ±10% • Temperature Limits: Electronics (Ambient) -40° to 140°F (-40° to 60°C) Process Interface -40° to 212°F (-40° to 100°C)...

Open the catalog to page 2

Model 88F Flushmount Pressure Transmitter - 3

Tel: 215-355-6900 www.ametekpmt.com Physical Specifi cations Materials of Construction • Process Wetted Parts: 316 SS • Diaphragm: Hastelloy C • Non Wetted Parts: 316 SS • Cast Head: CF-8M (316 Cast SS) • O Ring: Buna N • Fill Fluid: DC 200 Silicone (Standard) • Process Connection: Refer to dimension drawing. • Electrical Connection: 1/2 NPT Female • Weight: 1.67 lbs. (720 grams) Model Numbering: 88 fl ushmount pressure transmitter 88 F Flushmount pressure transmitter Pressure ranges 002 0/3 to 0/15 psi (0/0.2 to 0/1 bar) 003 0/6 to 0/30 psi (0/0.4 to 0/2 bar) 004 0/20 to 0/100 psi (0/1.4...

Open the catalog to page 3

Model 88F Flushmount Pressure Transmitter - 4

820 Pennsylvania Boulevard • Feasterville, PA 19053 • U.S.A. Tel: 215-355-6900 • Fax: 215-354-1802 • www.ametekpmt.com © AMETEK, Inc. All rights reserved • Printed in the U.S.A. • PDF608 (110084) K796373

Open the catalog to page 4