Catalogs >
AMETEK PMT Products >
Model 575P Submersible Level Transmitter

Model 575P Submersible Level Transmitter
4Pages

Catalog excerpts

Model 575P Submersible Level Transmitter - 1

Tel: 215-355-6900 www.ametekpmt.com Model 575P The 575P Transmitter indicates the level of liquid by continuously measuring hydrostatic pressure via its sensing element, an ion implanted silicon semiconductor chip with integral Wheatstone Bridge circuit. Once the sensor measures the pressure, the data is transmitted by a 4 to 20 mA output signal. This design provides for excellent linearity and repeatability, low hysteresis and long term stability. The transmitter is easy to install. Simply lower the transmitter into a tank. All the electronics are mounted in a submersible 316 stainless steel housing. A special cable support bracket is also available. This gives extra stability to the transmitter when used with longer lengths of cable or when used in an agitated liquid.* The transmitters are available calibrated for any span needed, from 0 to 3 psi or 0 to 0.2 bar (0 to 7 feet or 0 to 2.1 meters of water) to 0 to 300 psi or 0 to 20 bar (0 to 690 feet or 0 to 211 meters of water). To complete your liquid level measurement and control system, use the AMETEK Model DMC Digital Meter/Controller with the 575 Series Transmitters. * A conduit adapter is also available. Features CSA approved • for intrinsically safe operation • Solid state semiconductor sensor for accuracy and reliability • Rugged 316 stainless steel housing with excellent environmental protection • Easy to install and use • 2 wire 4 to 20 mA output • Vented to the atmosphere through the surface end of the cable • Reverse polarity and surge protected • Lightning protectors available • EMI protection available Description The Model 575P Submersible Level Transmitter has a HASTELLOY C diaphragm in a special, protective fl ange, for sewage applications. The unit is specially designed to provide the convenience of direct submergence in many types of liquid, especially wastewater, for quick, accurate and reliable level measurement. The simple design and rugged construction of these solid state instruments provide long lasting service with virtually no maintenance. Submersible Level Transmitter

Open the catalog to page 1

Model 575P Submersible Level Transmitter - 2

Tel: 215-355-6900 www.ametekpmt.com Applications • Tanks • Water/wastewater treatment • Ponds • Lift stations • Water wells • Slurry/sludge • Pump control • Level control Specifi cations • Feet of Water: 0/14, 0/35, 0/69, 0/138, 0/230, 0/345, 0/460, 0/690 • Meters of Water: 0/4, 0/10, 0/21, 0/42, 0/70, 0/105, 0/140, 0/210 • Bar: 0/0.4, 0/1, 0/2, 0/4, 0/7, 0/10, 0/14, 0/20 • PSI: 0/6, 0/15, 0/30, 0/60, 0/100, 0/150, 0/200, 0/300 • Output: 4 to 20 mA, 2 wire, current limited to 30 mA DC • Power Supply: 12 to 40 VDC with reverse polarity surge protection; Limited to 28 VDC for CSA I.S. • Loop...

Open the catalog to page 2

Model 575P Submersible Level Transmitter - 3

Tel: 215-355-6900 www.ametekpmt.com • Media Compatibility: Reference materials of construction • Electrical Connection: Attached 20 gauge polyurethane shielded cable. Unspliced lengths available up to 5000 ft. (1662 m) • Weight: 1 lb. 3 oz. (539 g) • Approvals: Meets CSA requirements for intrinsically safe operation in hazardous locations as designated by Class I, Div 1, Groups A, B, C & D and Class II, Groups E, F & G. Temperature Code T3C (when used with approved barrier). • Option: SJB-100 junction box with desiccant; DMC Meter Controller and Housing 575 level transmitter 575 Series...

Open the catalog to page 3

Model 575P Submersible Level Transmitter - 4

820 Pennsylvania Boulevard • Feasterville, PA 19053 • U.S.A. Tel: 215-355-6900 • Fax: 215-354-1802 • www.ametekpmt.com © AMETEK, Inc. All rights reserved • Printed in the U.S.A. • PDF808 (110102) K780588 Model 575 Series Submersible Level Transmitters

Open the catalog to page 4