Catalogs >
AMETEK PMT Products >
Model 375 Pressure Transmitter – Submersible or Pipe/Vessel Mount

Model 375 Pressure Transmitter – Submersible or Pipe/Vessel Mount
3Pages

Catalog excerpts

Model 375 Pressure Transmitter – Submersible or Pipe/Vessel Mount - 1

Product Data ELECTRONIC LEVEL MEASUREMENT PRODUCTS Model 375 Pressure Transmitter – Submersible or Pipe/Vessel Mount DESCRIPTION The Model 375 submersible level transmitter is specially designed to provide the convenience of direct submergence in many types of liquids for quick, accurate and reliable level measurement. The 375 provides an economical, lighter weight style for submersible level applications. The simple design and rugged construction of this solid state instrument provide long lasting service with virtually no maintenance. l Potted electronics for robust moisture intrusion pro- The Model 375 indicates the level of liquid by continuously measuring hydrostatic pressure via its isolated sensing element, an ion implanted silicon semiconductor sensor. The standard output signal is 4-20 mA. For other input / output options, consult factory. This design provides for excellent linearity and repeatability, low hysteresis and long term stability at an economical price. l Advanced digital compensation The Model 375 is easy to install; simply lower the sensor into a vessel or well. It’s that easy. All the electronics are potted and mounted in a submersible 316 stainless steel housing. A special cable support bracket is also available. This gives extra stability to the transducer when used with longer lengths of cable (up to 2500 feet) or when used in an agitated liquid. A conduit adapter is also available. l 2 wire, 4 to 20 mA output standard; other outputs A specially designed cable is factory installed and sealed to insure liquid tight performance. The customer connection end of the cable is sealed and a desiccant package is installed to limit the amount of moisture allowed to enter the barometric reference of the sensor. The transducer is available calibrated for any span needed, from 6 psi (13.8 ft of water) to 300 psi (692 ft of water). tection l Low cost l Solid state sensor for accuracy and reliability l Lightweight and compact size l Rugged 316 stainless steel housing with excellent environmental protection to IP68 l Easy to install and use l Vented to the atmosphere through the surface end of the cable (desiccant package supplied) with PSIG reference units l Reverse polarity and surge protected available - consult factory l Standard submersible model with nose cone; 1/4-18 NPT male with nose cone removed for pipe mount l Flush 1" NPT process connection option for pipe or vessel mounting Model 375 and 375F Flushmount Transmitters 1" NPT Flush 'F' Option, Pipe or Vessel Mount shown with desiccant package (limits moisture intrusion – provided with psig reference units) Submersible Sales/Technical Support Telephone: +1 215-355-6900 or e-mail: pmt.sales@ametek.com 820 Pennsylvania Boulevard | Feasterville, PA 19053 U.S.A. | Order Fax: +1 215-354-1802 © 2014, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. K796494 – Effective: 6-2014, Supersedes: New (110118) Specifications are subject to change without notice. Visit our Web site for the most up-to-date information.

Open the catalog to page 1

Model 375 Pressure Transmitter – Submersible or Pipe/Vessel Mount - 2

Product Data ELMP - 2 ELECTRONIC LEVEL MEASUREMENT PRODUCTS Pressure Ranges: 0-6 psi to 0-300 psi Accuracy at 25°C BFSL (Including Linearity, Hysteresis, Repeatability): 0.25% FS 1 Year Stability: < ±0.25% FS Load Limitation: 600 OHM MAX (4-20MA), 50K OHM MIN (all voltage outputs) Operating Temperature*: Pressure Ranges up to 150 PSI: -25 to 60°C (-13 to 140°F) Pressure Ranges above 150 PSI: -25 to 25°C (-13 to 77°F) Compensated Temperature: Pressure Ranges up to 150 PSI: 0 to 50°C (32 to 122°F) Pressure Ranges above 150 PSI: 0 to 25°C (32 TO 77°F) Total Error Band (Includes Temperature...

Open the catalog to page 2

Model 375 Pressure Transmitter – Submersible or Pipe/Vessel Mount - 3

Product Data ELMP - 3 ELECTRONIC LEVEL MEASUREMENT PRODUCTS Model 375 Submersible Level Transmitter* ' Standard units are psig reference, but psia andpsis reference available - consult factory. * Options N, R, and C include desiccant filter. Sales/Technical Support Telephone: +1 215-355-6900 or e-mail: pmt.sales@ametek.com 820 Pennsylvania Boulevard I Feasterville, PA 19053 U.S.A. I Order Fax: +1 215-354-1802 © 2014, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. K796494 - Effective: 6-2014, Supersedes: New (110118) Specifications are subject to change without notice. Visit our...

Open the catalog to page 3