Catalogs >
AMETEK PMT Products >
Level Mate III

Level Mate III
5Pages

Catalog excerpts

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Level Mate III Level Measurement System DESCRIPTION The AMETEK LEVEL MATE III Level System has a model 575SB stainless steel transmitter as standard. A variety of other submersible sensors may be chosen for the system to best suit the media and application. Both general purpose and hazardous use sensors are available. ●● Two year factory warranty on the system The customized LEVEL MATE III meter provides excitation voltage to the sensor, displays data from the sensor and can transmit an optional analog output signal for remote monitoring or recording. The system is easy to calibrate from front panel buttons or from a PC with Meter View software option. The large, easy to read dual line LED display provides local indication while the optional isolated analog output can interface with ancillary display, recording or control devices. 2 or 4 standard relay options allow for set and reset programming. With standard desiccant and optional onboard surge protectors the LEVEL MATE III Level System provides you with the most versatile level measurement system on the market. Factory programming allows for quick installation and field labor time savings. ●● Complete system of sensor, cable and meter/ controller in a NEMA 4X enclosure ●● Intrinsically safe sensors – Models 575S, 575P, 675 (with approved safety barrier) ●● Rugged stainless steel sensor housing provides excellent environmental and media compatibility ●● Sensor vented to atmosphere through the surface end of the cable or via separate vent tube ●● Microprocessor controlled meter for quick, easy set up and calibration ●● Large dual line 6 digit LED display ●● Programmable display and function keys ●● Meter can be programmed for inches of water, feet of water, meters of water or any desired engineering unit ●● Alternating pump control, 32 point, square root or exponential linearization standard features ●● Modbus ® RTU communication protocol standard Options include: ●● AC and DC lightning and surge protectors ●● 4 relay expansion module ●● Isolated 4-20 mA analog output from meter ●● USB serial communication kit for configuring, monitoring and data logging from a PC using DDMC MeterView software (available for download) APPLICATIONS ●● Municipal water systems and wells ●● Inventory tank gauging ●● Landfills ●● Lift stations ●● Flood channels ●● Pump control ●● Rivers, lakes, ponds Level Mate III shown with Model 575SB transmitter Sales/Technical Support Telephone: +1 215-355-6900 or e-mail: mctpmt.sales@ametek.com 820 Pennsylvania Boulevard | Feasterville, PA 19053 U.S.A. | Order Fax: +1 215-354-1802 © 2016, by AMETEK, Inc. All rights reserved. Printed in the U.S.A. K796492 – Effective: 1-2016, Supersedes: 6-2015 (110133) Specifications are subject to change

Open the catalog to page 1

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Level Mate III Level Measurement System SPECIFICATIONS These specifications pertain to the standard model 575SB with a #20 AWG polyurethane jacketed cable. Refer to specific data sheets for other sensor and cable specifications. Ranges: Feet of Water: 0 to 14, 0 to 35, 0 to 69, 0 to 138, 0 to 230, 0 to 345, 0 to 460, 0 to 690 Meters of Water: 0 to 4, 0 to 10, 0 to 21, 0 to 42, 0 to 70, 0 to 105, 0 to 140, 0 to 210 Temperature Range: General Ambient Operating: -25 to 180°F (-32 to 82°C)** ** CSA intrinsically safe when connected per...

Open the catalog to page 2

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Level Mate III Level Measurement System INSIDE VIEW Inside view of the Level Mate III enclosure showing factory wiring of the meter as well as AC power and sensor connection terminals. Optional DC lightning and surge protectors Part# LMA912 (protection for excitation and signal lines between meter and transmitter) Standard reusable canister desiccant Part# K234432 (initial desiccant supplied) Optional AC lightning and surge protectors Part# LMA918 115 VAC, Part# LMA919 230 VAC (protection for power line to the meter) Disposable 8"...

Open the catalog to page 3

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Level Mate III Level Measurement System 6.00 (152.40) Ø .31 (7.87) MOUNTING HOLE X4 SIZE IN BOX 6.32 (160.53) DELRIN SNUB NOSE SST SENSOR SCALE=1:3 Ø .25 (6.35) HOLE PATTERN FOR MOUNTING CABLE SUPPORT BRACKET NEMA 4X DIGITAL METER 0.6 (15.24) HIGH 6 DIGIT DIGITAL DISPLAY DELRIN SNUB NOSE 0.45 (11.43) HIGH 6 DIGIT ALPHA-NUMERIC DISPLAY 375 & SDT SENSOR SCALE=1:3 Ø .25 (6.35) CABLE SUPPORT BRACKET 7/8 HEX NUT Standard Sensor WEATHERTIGHT SEAL FOR TRANSMITTER CABLE 0.11 (2.79) TO 0.26 (6.60) Ø CABLE NYLON SNUB NOSE 575S SENSOR SCALE=1:3...

Open the catalog to page 4

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Level Mate III Level Measurement System Model Numbering: Level Mate III LM Base model Display Range Sensor Model Number Part Number * Length of model 575 / 575P, standard, factory installed, non vent tube, polyurethane, waterproof cable (4 cond / 20 AWG) * Length of model 675 / 375 / SST, standard, factory installed, vent tube, polyurethane, waterproof cable (3 cond / 22 AWG) * Length of model SDT, standard, factory installed, non vented tube, polyurethane, waterproof cable (6 cond / 24 AWG) Metal conduit connector for NEMA 4X...

Open the catalog to page 5