Microhardness Traverse Testing System MT91 » Unmatched accuracy – using precise Rockwell-type testing method » Unrivalled testing speed – as fast as six seconds per test cycle led Unriva uracy! nd acc peed a s » No operator interpretation of impressions needed – removes a common source of inaccuracies » Custom fixturing – enables measurement of larger samples to further reduce prep time » Less sample polishing needed – a 400 grit polish is all that is needed for accurate results » Easy set up of traverses – up to 24 traverses for a single procedure » Numerous report formats – easy to transfer results internally, as well as to customers Better than traditional testing systems – Accurate, fast and easy testing The Newage® MT91 System is an automatic microhardness testing system that uses the Rockwell method for the hardness result. Hardness is measured based on the depth of penetration rather than using an optical system to determine hardness based on the impression diameter. The main advantages of the MT91 Series are its very fast test cycle coupled with its incredible test accuracy. No traditional microhardness testers can come close to matching the MT91 in speed or accuracy, since no manual interpretation of the impression is required. All systems conform to relevant EU standards and are CE marked Entire case depth analysis can be made in a few minutes – an individual test cycle is just six seconds. What used to take hours now takes only minutes – making the MT91 perfect for

The Newage MT91 System is a modular and cost-effective solution for applications requiring advanced microhardness testing functionality, such as complex case depth traverses. The MT91 System starts with a MT91 microhardness tester with video camera, combined with our C.A.M.S.® Computer Assisted Measurement System software, a personal computer and a motorized X-Y axis positioning table. The MT91 System uses a video camera to view and define test measurement locations and traverse procedures. The C.A.M.S.® software operates the test head and motor control system to accurately position the test...

Programming features Features for individual measurements The MT91 System software is file-based. All setup parameters such as hardness scale, tolerance limits, part information, etc. are created and saved with the individual file. Files are created in a .csv format. Each new file has a set of attributes that define the test file. These attributes may include: • • • • • • • Part number Part name Spec order Heat number Load number Furnace number Lab number You also have the ability to add comments to further define the test setup file. Scale selection and conversion During test setup you configure...

Data management and reporting On-screen navigation tools MT91 System operators frequently comment on the system’s exceptional user friendliness. The on-screen navigational tools are intuitive and easy-to-use. As an example, a right click of the mouse automatically positions the sample from the cursor position to the center of the display – ideal for centering impressions, selecting a test position or for just navigating across the display. The MT91 System is supplied with comprehensive data management tools and report generation capabilities. A variety of standard report formats are provided....

Ordering information MT91 Series System Model Fully automatic MT91 Microhardness System, automatic X-Y, software *Other system configurations are available to suit specific applications. Options Model Special software for graphic traverse on welds Vibration isolation pads, set of 6 Newage Testing Instruments offers calibration service which is accredited to A2LA. Newage hardness testing – easy and accurate At Newage Testing Instruments we provide our customers with the benefit of our vast experience in the area of design and construction of Rockwell and Brinell type testing systems. For over...