DATA SHEET TOTAL CARBON ANALYZER Applications • Hydrocarbon and CO/CO2 impurities in ultra pure inert gases with no oxygen content - Argon, Ar - Helium, He - Hydrogen, H2 - Nitrogen, N2 Accurate and reliable analysis of total hydrocarbons and total carbons Fully automated analysis over a broad range of concentrations The Series 9000 TCA Total Carbon Analyzer is a microprocessor-based instrument designed to measure total hydrocarbon content as well as provide a combined carbon monoxide (CO) and carbon dioxide (CO2) reading. The analyzer is configured for single or multi-point sampling (with or without a sample pump) for pre-filtered (< 0.1 microns) non-condensing samples. Detection limits down to < 0.1 ppm. User-programmable ranges from 1 ppm to 100 ppm are factory-configured per the customer’s application to facilitate installation and setup. The Total Carbon Analyzer utilizes a flame ionization detector (FID) in conjunction with a catalytic methanizer. The system uses a two-step method to determine the total hydrocarbon (THC) content and, separately, the total carbon content of the sample. Total hydrocarbons are first measured and the catalyst converts the CO and CO2 to methane (CH4) and leaves the hydrocarbons unchanged for a total carbon measurement. The total hydrocarbon value is then automatically subtracted from the total carbon concentration to determine the combined CO/CO2 reading. All instrument parameters are reported clearly and continually refreshed on a large, graphical LCD display. Using analog, digital, and logic output communication capabilities, analytical information from the analyzer can be acquired using an external PC and a simple communications program such as Windows® HyperTerminal or the analyzer can output binary or ASCII formats directly to a data acquisition system or PLC. Every Series 9000 analyzer includes AMETEK MOCON - Baseline's free PC utility 9000 Keeper used for storing and uploading multiple methods, as well as sending configuration settings, directly to the analyzer. Features & Benefits • Flame Ionization Detector (FID) • Automatic FID ignition • Graphical LCD display with easy to use menu system • Sleek rack mountable profile • Automatic calibration at user-defined intervals • Internal multi-point sampling option • FlowGuard electronic control of fuel, air and sample • Electronic back-pressure regulator with sample bypass system • Discrete, multilevel concentration & fault alarms • Programmable analog output ranges • Programmable relays for diagnostics, concentration, alarms, and events • Automatic shut-off of sample, fuel and combustion air • Remote operation via RS-232 and Ethernet These features place the instrument well ahead of the competition in performance, aut

DATA SHEET Specifications Detector AMETEK MOCON - Baseline 19661 Highway 36 PO Box 649 Lyons, CO 80540 USA T: +1 303.823.6661 www.baseline-mocon.com © 2017, by AMETEK MOCON - Baseline. All rights reserved. The AMETEK and MOCON Baseline logos and design are registered trademarks of AMETEK MOCON in the United States of America and other countries. Information, descriptions, photographs, technical drawings, and specifications in this publication are provided in good faith and are subject to change without notice. While every effort has been made to make the information presented herein as complete...