Specifications FTI-E Thermal Imager Measurement range PROCESS & ANALYTICAL INSTRUMENTS Spectral response Frame rate Image pixels Detector type Uncooled microbolometer System measurement accuracy System thermal resolution (rms value) Ambient temperature range Thermal Imaging for Continuous Process Monitoring and Quality Control Borescope Field of View (Horizontal) Probe Length Probe Diameter DN 100 PN 16 Other flange options available on request Maximum Probe Temperature Borescope 30 0.5 m min. focus Field of View 30° x 22.5° Distance from object Target Area Pixel Area Borescope 60 0.5 m min. focus Field of View 60° x 45° Target Area Pixel Area 19” min. focus Field of View 30° x 22.5° 19” min. focus Field of View 60° x 45° Land Instruments International Ltd • Dronfield S18 1DJ • England Email: [email protected] • www.landinst.com • Tel: +44 (0) 1246 417691 • Fax: +44 (0) 1246 410585 AMETEK Land, Inc. • 150 Freeport Rd • Pittsburgh, PA 15238 • U.S.A. Email: [email protected] • www.ametek-land.com • Tel: +1 (412) 826 4444 • Fax: +1 (412) 826 4460 Non-Contact Temperature Measurement Solutions For a full list of international offices, please visit www.landinst.com Copyright © 2010-2012 Land Instruments International Continuous product development may make it necessary to change these details without notice Thermal Imaging Solutions for Furnaces & Boilers

When thermal imaging inside refractory lined furnaces or boilers is required the plant operator is required to cut large openings in the refractory to enable viewing of the critical area. This can cause significant wasted energy from heat loss through the opening and can be difficult to keep the opening free from debris. With the introduction of the FTI-Eb BoreScope it is possible to use the proven technology of the LAND FTI-E 391 thermal imager to accurately profile the temperature of the entire furnace with only a small opening in the wall. Typical installation showing the FTI‑Eb mounted into...