Specifications Sprint 8 Digital Thermometer Sprint 8 Sprint 8-L (with Green LED) Measuring range Spectral range Optics (see table inside) 4, 12, 30 and 48 inch focus factory set versions Internal Signal processing Measurement Span Adjustable anywhere within range, minimum span 100 °F Response speed (95% energy) 1% of meas. value specified in Kelvin 0.5 % of meas. value specified in Kelvin two-wire 4 to 20 mA temperature linear, into 600 Ohm load at 24V USB interface (galvanically isolated) Parameters Power supply Adjustable via USB interface and supplied EasySpot software: emissivity; response time; Units °F / °C, measurement span 24 V DC +/- 25%, ripple 500 mV max LED: 7 … 30 V DC, <200 mW Power consumption Operating temperature Storage temperature Stainless Steel, IP 65 sealed Thermometer body length 5 inches, threaded 40mm x 1.5 SPRINT 8 Digital Thermometer AMETEK Land, Inc. • 150 Freeport Rd. • Pittsburgh, PA 15238 • U.S.A. Tel: +1 (412) 826 4444 • Email: [email protected] • www.ametek-land.com For a complete listing of LAND offices worldwide, please visit our website. Non-Contact Temperature Measurement Solutions Applies to the USA Copyright © 2008 Land Instruments International Continuous product development may make it necessary to change these details without notice.

Digital Thermometer Sprint 8 thermometers are compact, rugged industrial non-contact thermometers with digital signal processing, USB configuration and simple, easy to implement 2-wire, 4-20mA loop connectivity. Single axis mounting bracket Model Sprint 8-SM Models with optional Green LED aiming diodes are available. This feature simplifies alignment when a measurement object is otherwise difficult to target. The Green LED spot size and location approximates the actual measurement spot size at the measurement distance. To make installation easy Sprint 8 is housed in a solid stainless steel tubular...