Catalogs >
AMETEK Land >
Smoke and particulates monitoring model 4200

Smoke and particulates monitoring model 4200
4Pages

Add to favorites

Catalog excerpts

Smoke and particulates monitoring model 4200 - 1

smoke and particulates monitoring Combustion & Environmental Monitoring

Open the catalog to page 1

Smoke and particulates monitoring model 4200 - 2

model 4200 smoke and particulates monitor Key Features and Benefits Small, lightweight and compact - easy to locate and install High reliability, low maintenance - no moving parts Measurement Output in Opacity or mg/m3 - flexible configuration Wide range of optional accessories - configure to meet process needs Simple keypad operation - straightforward setup, calibration and diagnostics Stability and reliability for continuous monitoring. Proven economical technology for performance optimisation Leading Technology The patented dual LED technology of the Model 4200 has proven itself...

Open the catalog to page 2

Smoke and particulates monitoring model 4200 - 3

3 High Brightness Red LED 4 IP65 / NEMA4 enclosure 5 Built-in Audit Jig, and Check Reflector 6 Optional air-servo operated Fail-safe Shutter 7 *Patented ‘flood LED’ technology 8 Integral Control Panel *The Model 4200 uses the Land patented Flood LED Technique UK Patent No. 2287785 U.S. Patent No. 5,617,212 Measurement Principle The cross-stack, double-pass measuring system comprises a transceiver and retro-reflector unit. The transceiver has a high intensity source LED, which sends a beam of light through a diffuser and onto a beamsplitter. Half of the light is transmitted via a lens to the...

Open the catalog to page 3

Smoke and particulates monitoring model 4200 - 4

Measuring System Technique: Operating Wavelength: Light source: Ranges: Linearity: Resolution: Drift: Angle of Projection: Angle of View: Response Time: Averaging: Suitable for Stacks: Flange-to-flange Pathlength: Calibration: Method: Dust: * Performance reduced for pathlengths > 7.5 m / 25 ft Double pass / path transmissometry 623 ± 20 nm High intensity red LED Opacity: 0 - 20 % to 0 - 100% Dust Density: 0 - 100 to 0 to 999 mg/m3 < 2 % of range* 0.1 % Opacity; 0.1 mg/m3 Dust Density < 3 % of range per month < 5° < 5° 5 seconds to 90 % of final value Selectable from 1 s to 59 s, 1 min to 59...

Open the catalog to page 4

Smoke and particulates monitoring model 4200 4Pages

Catalog excerpts

All AMETEK Land catalogs and technical brochures

Smoke and particulates monitoring model 4200
4Pages