Group: AMETEK Sensors, Test & Calibration
Catalog excerpts
CATRAC & SnapTrac Cable & Hose Carrier Products ® CATRAC Cable & Hose Carrier Products Ordering Guide & Technical Information Ordering Guide & Technical Information
Open the catalog to page 1CATRAC® is used on various types of machinery as a means of safely and efciently conveying power, electrical, air, or uid (or a combination of these) to equipment in motion. CATRAC is designed to be maintenance free and to protect cables and hoses from abrasion, wear and twisting. A wide variety of options are available. split aluminum bar carriers, rod carriers, removable pipe, spring loaded rods, vertical pins, double deck, custom radius “M” dimension (including double radius), custom and special widths, including single widths, double widths, triple widths, etc.. We offer various support...
Open the catalog to page 2CATRAC® CATRAC SelectionGuide Selection Guide Style Max. Unsupported Length in Feet 1. Determine the outside diameter of the largest cable or hose to be carried. 2. Determine total machine travel. Unsupported length of CATRAC® on horizontal applications is total travel ÷ 2 when no supports are used and the stationary mounting foot is placed at the center line of travel. 3. Determine total weight to be carried per foot. 4. Use the charts to select the proper CATRAC style for your application. Please note that hose area varies with type of carriers used. 5. Determine the rolling radius of the...
Open the catalog to page 3CATRAC CATRAC ® Carrier Designs Carrier Designs RC Rod Carriers Available on 2CP, 3CP, 203, 375, 304 style tracks, this tubing is used to hold the entire CATRAC® together. They are fastened to links with a self tapping screw that can be removed from top or bottom rod to make installation of hose or cable easier. WC Welded Carriers The carrier is widely used in very rugged applications. It can withstand severe hydraulic shock and has no loose parts which can be lost during installation of the hose cable. The welded carrier bars alternate position top to bottom on styles 203, 375 and 304....
Open the catalog to page 4CATRAC CATRAC ® Carrier Designs Carrier Designs AB Split Bar Carriers 1/2” wide aluminum or 3/4” wide wood split bar carriers can be provided. This carrier is custom machined to your specications. Note: Holes must be at least 1/8” larger than cable hose diameter. VP Vertical Pins Vertical pins, also referred to as separators or dividers, can be welded into RP, SL and WC style carriers to separate cables or hoses to prevent twisting or overlap. Extra Heavy Duty (Mill-Duty) Construction For steel mills and other heavy duty service, the double welded carrier (MD option) is used as well as...
Open the catalog to page 52CP and 3CP CATRAC® ® 2CP and 3CP CATRAC Part Number System Part Number System 8060 CATRAC CATRAC Side Link 2CP 2CP *Consult factory for special radius. Carrier Width* 02 04 06 08 *Consult factory for special widths. Ass’y Weight/Ft. 5# Weight based on 8” carrier. NOTE: Mounting feet must be ordered separately by the pair. All dimensions are in inches. 6380 Brockway Road • Peck, MI 48017 • 800.325.8074 • 810.378.5511 • Fax 810.378.5516 • www.AMETEKAPT.com 6380 Brockway Road • Peck, MI 48466 • 800.325.8074 • 810.378.5511 • Fax 810.378.5516 • www.ametekapt.com
Open the catalog to page 62CP and 3CP CATRAC® 2CP and 3CP CATRAC® Part Number System Part Number System WC Spring Loaded Removable Pipe HC NOTE: CATRAC Length must be divisible by pin centers for that style. Pin & Retaining Ring Construction Standard Mounting Feet Horiz. Mount Feet P/N Vert. Mount Feet P/N 2CP Split Aluminum Bar Carrier Max. DIA. CATRAC Style Normally one (1) pair of mounting feet are used at each end of the CATRAC. Unless specied, anges are mounted inward on standard CATRAC. Horizontal Mounting Feet 6380 Brockway Road • Peck, MI 48017 • 800.325.8074 • 810.378.5511 • Fax 810.378.5516 •...
Open the catalog to page 7CATRAC CATRAC®® 2CP Dimensions 2CP Dimensions 2.00 CLEARANCE REQUIRED ABOVE LINKS Z .41 X .75 MOUNTING SLOTS TYPICAL CENTER LINE OF TRAVEL (SL) SPRING LOADED REMOVABLE PIPE NOTE: 1) CATRAC LENGTH MUST BE DIVISIBLE BY PIN CENTERS. 2) ALL STANDARD CARRIER WIDTHS IN 2" INCREMENTS 2" THRU 8". 3) FOR SPECIAL WIDTHS, CONSULT FACTORY. 4) ALL PARTS ZINC PLATED UNLESS OTHERWISE SPECIFIED. 5) MOUNTING SLOTS ARE DESIGNED TO ALLOW "2CP" REPLACEMENT OF EXISTING "1A", "2A", & "203" STYLE CATRAC', STANDARD MTG. FEET. (AB) SPLIT ALUMINUM BAR CARRIER .25 RADIAL LENGTH IF THE STATIONARY FOOT IS MOUNTED ON...
Open the catalog to page 8CATRAC® CATRAC® Dimensions 3CP Dimensions 3.00 CLEARANCE REQUIRED ABOVE LINKS Z .41 X .75 MOUNTING SLOTS TYPICAL CENTER LINE OF TRAVEL (SL) SPRING LOADED REMOVABLE PIPE NOTE: 1) CATRAC LENGTH MUST BE DIVISIBLE BY PIN CENTERS. 2) ALL STANDARD CARRIER WIDTHS IN 2" INCREMENTS 4" THRU 12". 3) FOR SPECIAL WIDTHS, CONSULT FACTORY. 4) ALL PARTS ZINC PLATED UNLESS OTHERWISE SPECIFIED. 5) MOUNTING SLOTS ARE DESIGNED TO ALLOW "3CP" REPLACEMENT OF EXISTING "BB", "CC", & "304" STYLE CATRAC'S, STANDARD MTG. FEET. (AB) SPLIT ALUMINUM BAR CARRIER 4.00 IF THE STATIONARY FOOT IS MOUNTED ON EITHER SIDE OF...
Open the catalog to page 9Mill-Duty CATRAC® ® Mill-Duty CATRAC Part Number System Part Number System 8060 CATRAC CATRAC Side Link 203 Ass’y Weight/Ft. 30# Weight based on 8” carrier. 6380 Brockway Road • Peck, MI MI 48466 800.325.8074 • 810.378.5511 • Fax 810.378.5516 • www.AMETEKAPT.com 6380 Brockway Road • Peck, 48017 • • 800.325.8074 • 810.378.5511 • Fax 810.378.5516 • www.ametekapt.com
Open the catalog to page 10Mill-Duty CATRAC® ® Mill-Duty CATRAC Part Number System Part Number System WC Welded Vertical Pins On Carrier Types RP, SL & WC No Charge Snap Ring Const. Bolted Const. Note: CATRAC Length must be divisible by pin centers for that style. Standard Mounting Feet Split Aluminum Bar Carrier Max. Hole 1.25 2.00 2.75 3.50 4.50 6.50 CATRAC Style Horiz. Mount Feet P/N Vert. Mount Feet P/N Vertical Mounting Feet Normally one (1) pair of mounting feet are used at each end of the CATRAC. Unless specified flanges are mounted inward on standard CATRAC. Horizontal Mounting Feet 6380 Brockway Road • Peck,...
Open the catalog to page 11All AMETEK Factory Automation catalogs and technical brochures
-
956 eBlok
8 Pages
-
958A
6 Pages
-
Motogard Series
4 Pages
-
7330X Series
2 Pages
-
7330 V Series
2 Pages
-
7330 S & F Series
2 Pages
-
7330 EX/ED Series
2 Pages
-
Industrial Brakes
2 Pages
-
957
6 Pages
-
Linear Displacement Transducers
86 Pages
-
950IS
3 Pages
-
B/W Controls Catalog
56 Pages
-
1980 Rotating Cam Limit Switch
20 Pages
-
953A/D/SSI VMAX Gemco LDT
6 Pages
-
950MD Gemco LDT
1 Pages
-
955S Smart BRIK
2 Pages
-
955LC Brik
2 Pages
-
952 BlueOx Gemco LDT
9 Pages
-
1986DN - DeviceNet Resolver
2 Pages
-
955D BRIK Gen III Gemco LDT
2 Pages
-
955A Brik Gemco LDT
2 Pages
-
925 Cable Reel Sensor
8 Pages
Archived catalogs
-
Linear Cable Reel Sensor
8 Pages
-
RESOLVER CATALOG
20 Pages