1. Catalogs
  2. AMETEK Dynamic Fluid Solutions
  3. Nautilair Combustion Blowers

Nautilair Combustion Blowers

Nautilair Combustion Blowers
1 / 22 PagesView full catalog

Nautilair Combustion Blowers

Product catalog summary
Overview: This document outlines the technical specifications and features of Nautilair™ variable speed blowers, which are engineered for high-efficiency and low emissions in gas-fired combustion systems. It covers model details, performance metrics, and available options.
Specifications: The blowers come in various models with AC input voltages of 120V and 240V, single-phase. They are equipped with brushless DC motors featuring hall effect sensor feedback, internal electronic commutation controllers, and non-sparking aluminum impellers. The design includes rubber vibration and shock mounts, along with long-life sealed ball bearings.
Control Options: These blowers support multiple speed control input signals such as PWM (15-45 VDC @ 500Hz-10KHz), 0-10 VDC, mechanical potentiometer, and 4-20 mA. Optional features include tachometer outputs, pressure feedback sensors, RS232 communication cards, and multiple preset demo cards.
Performance: Performance charts illustrate maximum typical performance levels, noting that actual operation is generally below these levels. The document clarifies that the information is not a binding performance guarantee.
Compliance: The components comply with UL507 and CSA C22.2#113 standards.
Contact Information: Contact details for AMETEK Technical & Industrial Products and its distributors are provided for regions including North America, Europe, Israel, Italy, Japan, Australia, and New Zealand.
See more

Catalog excerpts

Nautilair Combustion Blowers-1

NAUTILAIRT Serfes Variable Speed BLDC Combustion Blower Products Catalog AMETEK TECHNICAL AND INDUSTRIAL PRODUCTS 627 Lake Street, Kent, OH 44240-2660 USA www.ametektip.com

 Open the catalog to page 1
Nautilair Combustion Blowers-3

1 ametek electromechanical group (emg) ... is one of the world’s largest producers of high speed electric motor products for original equipment manufacturers (OEMs). In business since 1915, EMG uses its core competencies in motion and air movement products as engineered solutions for application-specifi c needs. A business unit of AMETEK EMG, AMETEK Technical & Industrial Products offers brushless DC motor-, blower-, and controller-based solutions. The standard product lines of AMETEK Technical & Industrial Products cover a wide range of application demands. If there is a need for a product with...

 Open the catalog to page 3
Nautilair Combustion Blowers-4

2 AMETEK TECHNICAL & INDUSTRIAL PRODUCTS 627 Lake Street, Kent OH 44240 Tel: 330-673-3452 • Fax: 330-677-3306 • www.ametektip.com OUR Standard, Full Line Catalog We’re Big On Brushless”. . . . . The below information highlights TIP’s standard product line for other variable speed, brushless (BLDC) motors, blowers, fans, pumps, and controllers. Motors. . . . . offer precise control for a wide range of applications. AMETEK standard motor designs offer maximum controllable performance, coupled with the reliability of brushless technology in a compact, cost effective package. First introduced in...

 Open the catalog to page 4
Nautilair Combustion Blowers-5

3 Nautilair™ 7.6” (192mm) Variable Speed Blower 24 Volt DC Input, Standard Output NOTES: • Designed for high effi ciency, low NOx, and CO emission gas-fi red combustion systems. • Brushless DC motor with hall effect sensor feedback. • Internal electronic commutation controller with built in speed control and protection features. • Rubber vibration and shock mounts on motor bracket and bearing system. • Long life, sealed, ball bearings with high temperature grease. • Non sparking, hardened aluminum impeller. • The performance points listed in the charts depict maximum typical performance levels....

 Open the catalog to page 5
Nautilair Combustion Blowers-6

AMETEK TECHNICAL & INDUSTRIAL PRODUCTS 627 Lake Street, Kent OH 44240 Tel: +1 330-673-3452 • Fax: +1 330-677-3306 • www.ametektip.com 4 Nautilair™ 7.6” (192mm) Variable Speed Blower 24 Volt DC Input, Standard Output TYPICAL PERFORMANCE

 Open the catalog to page 6
Nautilair Combustion Blowers-7

5 Nautilair™ 7.6” (192mm) Variable Speed Blower 120 Volt AC Input, Single Phase, Standard Output/High Output NOTES: • Designed for high effi ciency, low NOx, and CO emission gas-fi red combustion systems. • Brushless DC motor with hall effect sensor feedback. • Internal electronic commutation controller with built in speed control and protection features. • Rubber vibration and shock mounts on motor bracket and bearing system. • Long life, sealed, ball bearings with high temperature grease. • Non sparking, hardened aluminum impeller. • Utilizes AMETEK’s IntelliGen™ controller electronics • The...

 Open the catalog to page 7
Nautilair Combustion Blowers-8

AMETEK TECHNICAL & INDUSTRIAL PRODUCTS 627 Lake Street, Kent OH 44240 Tel: +1 330-673-3452 • Fax: +1 330-677-3306 • www.ametektip.com 6 Nautilair™ 7.6” (192mm) Variable Speed Blower 120 Volt AC Input, Single Phase, Standard Output/High Output TYPICAL PERFORMANCE

 Open the catalog to page 8
Nautilair Combustion Blowers-9

7 Nautilair™ 7.6” (192mm) Variable Speed Blower 240 Volt AC Input, Single Phase, Standard Output/High Output NOTES: • Designed for high effi ciency, low NOx, and CO emission gas-fi red combustion systems. • Brushless DC motor with hall effect sensor feedback. • Internal electronic commutation controller with built in speed control and protection features. • Rubber vibration and shock mounts on motor bracket and bearing system. • Long life, sealed, ball bearings with high temperature grease. • Non sparking, hardened aluminum impeller. • Utilizes AMETEK’s IntelliGen™ controller electronics • The...

 Open the catalog to page 9
Nautilair Combustion Blowers-10

AMETEK TECHNICAL & INDUSTRIAL PRODUCTS 627 Lake Street, Kent OH 44240 Tel: +1 330-673-3452 • Fax: +1 330-677-3306 • www.ametektip.com 8 Nautilair™ 7.6” (192mm) Variable Speed Blower 240 Volt AC Input, Single Phase, Standard Output/High Output TYPICAL PERFORMANCE

 Open the catalog to page 10
Nautilair Combustion Blowers-11

9 Nautilair™ 8.0” (204mm) Variable Speed Blower 120 Volt AC Input, Single Phase, Standard Output NOTES: • Designed for high effi ciency, low NOx & CO emission gas-fi red combustion systems • Brushless DC motor with hall effect sensor feedback • Internal electronic commutation controller with built in speed control and protection features • Polypropylene housing and impeller • Long life, sealed, ball bearings with high temperature grease • The performance points listed in the charts depict maximum typical performance levels. This is a variable speed product and therefore operates at most performance...

 Open the catalog to page 11
Nautilair Combustion Blowers-12

AMETEK TECHNICAL & INDUSTRIAL PRODUCTS 627 Lake Street, Kent OH 44240 Tel: +1 330-673-3452 • Fax: +1 330-677-3306 • www.ametektip.com 10 Nautilair™ 8.0” (204mm) Variable Speed Blower 120 Volt AC Input, Single Phase, Standard Output TYPICAL PERFORMANCE

 Open the catalog to page 12
Nautilair Combustion Blowers-13

11 Nautilair™ 8.9” (225mm) Variable Speed Blower 120 Volt AC Input, Single Phase, Standard Output/High Output BLACK (LINE) WHITE (NEUTRAL) BLU (COMMON) PWM IN (BLK) NOT USED TACHOUT (WHT) DC VOLTAGE (RED) WHITE (NEUTRAL) BLACK (LINE) RED (10V DC SIGNAL) BLUE (COMMON) 2X 6.50±2.60 (165.1±25.4) 6X 0.56±.03 (14.2±0.76) AIR INTAKE DETAIL STANDARD POWER CONNECTION “M” & “E1” PWM CONTROL CONNECTION (OPTIONAL “E1”) Ø4.331 (110) .138 (3.5) Ø 3.95±.03 (100.3±0.76) {INTAKE} Ø 5.68 (144.3) Ø4.331 (110) 9.80±.05 (245±1.27) 5.25±.03 (133.4±0.76) 2.64±.03 (67.1±0.76) 4.724±.010 (120±0.25) 4.724±.010 (120±0.25)...

 Open the catalog to page 13
Nautilair Combustion Blowers-15

13 Nautilair™ 8.9” (225mm) Variable Speed Blower 240 Volt AC Input, Single Phase, Standard Output/High Output BLACK (LINE) WHITE (NEUTRAL) BLU (COMMON) PWM IN (BLK) NOT USED TACHOUT (WHT) DC VOLTAGE (RED) WHITE (NEUTRAL) BLACK (LINE) RED (10V DC SIGNAL) BLUE (COMMON) 2X 6.50±2.60 (165.1±25.4) 6X 0.56±.03 (14.2±0.76) INCH (MM) AIR INTAKE DETAIL STANDARD POWER CONNECTION “M” & “E1” PWM CONTROL CONNECTION (OPTIONAL “E1”) Ø 4.331 (110) .138 (3.5) Ø 3.95±.03 (100.3±0.76) {INTAKE} Ø 5.68 (144.3) Ø4.331 (110) 9.80±.05 (245±1.27) 5.25±.03 (133.4±0.76) 2.64±.03 (67.1±0.76) 4.724±.010 (120±0.25) 4.724±.010...

 Open the catalog to page 15
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.