Catalogs >
AMETEK Drexelbrook >
Vibration Level Measurement TF-100 Series

Vibration Level Measurement TF-100 Series
4Pages

Catalog excerpts

Vibration Level Measurement TF-100 Series - 1

DATA SHEET Vibrating Tuning Fork Easy Installation The TF-100 requires no calibration. Install, connect power and outputs, and you're done. Compact Design Integral electronics with sensor lengths as short as 1.9" (47mm) makes this switch ideal for limited space installations. Reliability Internal Self-Check feature monitors the electronics and sensor. If there is a fault, the output switches to the Alarm State. Output • TF-L includes a DPDT relay output for local control of pumps, valves, or alarm indication. • TF-P offers PNP or NPN transistor output. • TF-T is a current output switch (8 mA / 16 mA). Application The TF-100 Series Point Level Switch is designed for reliable indication of liquids and light slurries. The output can be set to indicate alarm on either high level for spill prevention, or low level for run-dry protection. Versatility This versatile level switch requires no calibration and is available with relay, transistor, or current outputs. The electronic module responds to changes in frequency from an uncovered to a covered fork. As such, it is immune to changes in electrical properties of the material. This allows the TF-100 Series to be used in vessels that can have either conductive or insulating liquids. Maintenance Free When used in accordance with installation guidelines the TF-100 Series - Vibrating Tuning Fork requires no routine maintenance. Sanitary Sanitary models are available for Pharmaceutical and Food & Beverage applications. AMETEK’ DREXELBROOK www.Drexelbrook.com

Open the catalog to page 1

Vibration Level Measurement TF-100 Series - 3

TF-100™Series TF-100™ Series Specifications Specifications Sensing Element Sensing Element 316 L Stainless Steel (optional flanges and 316 L Stainless Steel tri‑clamp mountings available) (optional flanges and tri‑clamp mountings available) ¾ inch NPT (Standard) 316 L Stainless Steel (optional flanges and 316 L Stainless Steel tri‑clamp mountings available) (optional flanges and tri‑clamp mountings available) ¾ inch NPT (Standard) 316 L Stainless Steel (optional flanges and 316 L Stainless Steel tri‑clamp mountings available) (optional flanges and tri‑clamp mountings available) ¾ inch NPT...

Open the catalog to page 3

Vibration Level Measurement TF-100 Series - 4

TF-100™ SeriesModel Numbering TF -100 Series Technology TF TF-100 Series Vibration Point Level Switch Output L Line Powered Relay Output P PNP Transistor Output T Two Wire Current Output Approvals 3 FM / CSA Sensing Element 0 316 SS Stainless Steel Sensor Mounting Type (See separate Mounting Chart for first three digits) IL xxxA xxxC xxxD xxxE xxxF xxxG xxxH xxxZ 1.88" (47 mm) Flange Mounted, Standard Length is 2 1/8" (54 mm) 6" (152 mm) 300# RF 316/316LSS 300# RF 316/316LSS 300# RF 316/316LSS Tri-Clamp 3A Sanitary Tri-Clamp 3A Sanitary Tri-Clamp 3A Sanitary Tri-Clamp 3A Sanitary AMETEK...

Open the catalog to page 4