A Leader In Level Measurement Solutions IntelliPoint RF Series Point Level Switch One of the Drexelbrook RF Point Level Switches You Won't Have to Calibrate Simply install the IntelliPoint RF Series into the tank and apply power…that's it! Unlike other RF or capacitance systems that require calibration via setpoint potentiometers, jumpers, magnets, or pushbuttons, the IntelliPoint RF Series reliably detects the absence or presence of material without any adjustments. The IntelliPoint RF Series software continuously monitors the application for changes in composition, dielectric or conductivity, and maintains a repeatable trip point on the probe. Other RF and capacitance systems require calibration adjustments when the process material is changed. Since the the IntelliPoint RF Series recognizes changes in material, it is ideal for non-dedicated tanks that are used for a wide variety of products. Universal Power Supply Intelligent Electronics • No calibration or setpoint adjustments. • Ignores changes in dielectric or conductivity. • Automatically recognizes and ignores coatings to prevent false alarms. • Continuous self-test monitors circuits and sensing elements for faults. • Universal power supply automatically detects input power source. Diverse Applications • Detects the absence or presence of liquids, slurries, interfaces and granulars. • (2) SPDT relays; relay#2 can be configured as an alarm or fault. Dual Compartment Housing • Power Supply is isolated from intrinsically-safe sensing element and circuit board. Remote or Integral Electronics • Unlike many technologies, electronics can be remote mounted to a convenient or safe location The IntelliPoint electronics use a universal power supply module that can be powered from a 85 to 250 Vac or 21 to 100 Vdc supply without moving jumpers. Self-Test Feature Automatic and manual test functions ensure proper system operation. An AutoVerify™ selfcheck circuit continuously monitors that the complete system is functioning properly. The Manual Certify not only checks the function of the system, but also checks the AutoVerify self-test circuits to make sure that they are also working properly. Dual Compartment Housing New dual compartment housing separates the customer wiring and power supply from the sensing element and operating circuits. The encapsulated power supply/terminal block design eliminates the possibility of damage caused by moisture in the conduit.

IntelliPoint RF Series Specifications Technology: RF Admittance. Calibration: None. Modes Of Operation: High and Low Level. Repeatability: 2 mm (0.08 inch) conductive liquids. Response Time: Less than one second. Ambient Electronic Temperature: -30 to 70°C (-28 to 158°F) KEMA. -40 to 70°C (-40 to 158°F) FM / FMc. Storage Temperature: -40 to 85°C (-40 to 185°F). Maximum Switching Capacity: 2000 VA/150 Watt. Minimum Contact Load (DC): 100 mA/12 Vdc. 0 to 200 mA / 12 VDC (Optional) Indicators: LEDs: Green Power, Red Relay 1, Red Relay 2. Self-Check: AutoVerify automatically and continuously checks...

RNL IntelliPoint RF Series Model Numbering (continued on next page) IntelliPoint RF TM Technology R RF Admittance Measurement Type L No Calib., 2 pF Fixed Preload P No Calib., 0.5 pF Fixed Preload (High Sensitivity) Manual Calibration Manual Calibration (High Sensitivity) No Calib., 10 pF Fixed Preload No Approvals, NEMA 4X/IP66, M20 X 1.5 conduit entries No Approvals, NEMA 4X/IP66, ¾” NPT conduit entries ATEX Approved, NEMA 4X/IP66, M20 X 1.5 conduit entries FM / FMc Approved, NEMA 4X/IP66, ¾” NPT conduit entries No Approvals, NEMA 4X/IP66, M20 X 1.5 conduit entries, Dual Seal, Perm-a-Seal sensors...

Interface Measurement 69 bar @ 38°C (1000 PSI @ 100°F) 34.5 bar @ 149°C (500 PSI @ 300°F) 20 Miniature Pilot 700-0209-002 remote 6.9 bar @ 121°C (100 PSI @ 250°F) Plant Sensor (1)(7) 0 bar @ 232°C (0 PSI @ 450°F) Fly Ash Precipitators, Baghouse, and Economizers (1) (6) Application Sensing Element Pressure/Temperature 31 No hopper Installation 700-0029-001 remote 0.1 bar @ 260°C (2 PSI @ 500°F) 32 Hopper Installation 700-0029-002 remote 0.1 bar @ 260°C (2 PSI @ 500°F) up to 200mm (8 inches) 33 Hopper Installation 700-0029-003 remote 0.1 bar @ 260°C (2 PSI @ 500°F) up to 406mm (16 inches) 34 Hopper...