DATA SHEET Intelligent Electronics Save Time and Money • UNIQUE! - NO calibration or setpoint adjustments, for most applications. • UNIQUE! - Ignores changes in dielectric or conductivity. • Automatically recognizes and ignores coatings to prevent false alarms. • Universal power supply automatically detects & adjusts to input power source. Diverse Applications • Detects the absence or presence of liquids, slurries, and granulars. • Capable of high pressures and temperatures. Economical Without Sacrifice • Retains superior performance. • Less maintenance than other technologies; no moving parts to hang up or wear out. Output • DPDT relay dry contacts at 5A, 120VAC. Remote or Integral Electronics Unlike many technologies, electronics can be remote mounted to a convenient or safe location. One of the Drexelbrook RF Point Level Switches You Won't Have to Calibrate Simply install ThePoint Series into the tank and apply power...that's it! Unlike other RF or capacitance systems that require calibration via setpoint potentiometers, jumpers, magnets, or pushbuttons, ThePoint Series reliably detects the absence or presence of material without any adjustments. ThePoint Series software continuously monitors the application for changes in composition, dielectric or conductivity, and maintains a repeatable trip point on the probe. Other RF and capacitance systems require calibration adjustments when the process material is changed. Since ThePoint Series recognizes changes in material, it is ideal for non-dedicated tanks that are used for a wide variety of products. Lower Cost of Ownership In addition to lower initial investment, ThePoint continues to save with little or no maintenance compared with other technologies. Further, the sensor can be lengthened or shortened in the field, saving need for additional purchases. Universal Power Supply ThePoint electronics use a universal power supply module that can be powered from a 19 to 250 Vac or 18 to 200 Vdc supply without moving jumpers.

Specifications Technology: RF Admittance. Calibration: None (for most applications). Modes Of Operation: High and Low Level. Repeatability: 2 mm (0.08 inch) conductive liquids. Response Time: Less than one second. Ambient Electronic Temperature: -40 to 70°C (-40 to 158°F) FM, FMc Storage Temperature: -40 to 85°C (-40 to 185°F). Indicators: LEDs: Green Power, Red Relay 1. Time Delay: 0-60 seconds, forward or reverse-acting. Supply Voltage: 19-250 VAC 18-200 VDC Auto-detecting without jumpers. Power Consumption: 2 watts maximum. Relay Contacts: DPDT dry contacts at 5A, 120Vac. Maximum Contact Load: 5A/30...

Model Numbering (continued on next page) Model Numbering (continued on next page) Technology P RF Admittance Measurement Type N Std Auto Cal L Std 2 pF Fixed T 10 pF Auto Cal V 10 pF Fixed Hi Sense .5 pF Auto Cal Hi Sense .5 pF Fixed Hi Sense Manual Std Sense Manual NOTE: All Calibration modes are built into the standard unit. Modes can be changed in the field as required (See Instruction Manual) Input L Universal Power Supply 19-250 VAC, 18-200 VDC Output 1 One DPDT Relay, dry contacts, 5A, 120VAC (Min 100 mA / 12 VDC) 2 One DPDT Relay, gold plated contacts (Max 200 mA / 12 VDC) Housing 0 1...

Model Numberingfeontineudfrom previous page) 20 Miniature Pilot 700-0209-002 remote 6.9 bar @ 121°C (100 PSI @ 250°F) Fly Ash Precipitators, Baghouse, and Economizers (1) (6) Application Sensing Element Pressure/Temperature up to 635mm (25 inches) Plugged Chute Detection (1) (5) Application Sensing Element Pressure/Temperature extra heavy duty 55 Flush Mount Sensor 700-0207-006 remote 0.1 bar @ )2°C (1 PSI @ 1)0°F) 203uu2 () inches2) heavy duty High Pressure / High Temperature 60 High Pressure & Teup. 700-0204-03) remote 137.9 bar @ 93°C (2000 PSI @ 200°F) 316SS and Ceramic...