Group: Ametek LMS
Catalog excerpts
DATA SHEET Multiple Operating Point Level Control High Level Pump On Deadband Pump Off Multiple operating points through a single entry System offers up to four control points on a single sensing element. One relay has an adjustable differential, providing two control points. Control up to four operating points on a single sensor with the MultiPoint II Level Control from Drexelbrook. The MultiPoint II level control is economical for processes requiring multiple operating points, such as batch processing and sump applications. The system provides four operating points with only one electronic unit to install and maintain. It requires only one opening in the vessel for the sensor. Top mounting eliminates any openings below the material level. Single entry in the top of the vessel eliminates any possibility of leaks in the vessel due to the placement of the control at the material level. The sensing element mounts in a single NPT or flange mounting at the top of the vessel. Coating on the sensor has no effect on the measurement. For process materials that produce coatings, the MultiPoint II Level Control features Drexelbrook’s unequaled Cote-ShieldTM circuitry. Cote-Shield ignores the effects of build-up on the sensing element and continues to accurately detect the presence or absence of material. No need to empty the vessel for installation Sensing element is mounted in the top of the vessel. This eliminates the need for openings below the material level. No Maintenance All electronic design and no moving parts eliminate the need for maintenance. Choose the most convenient location for the transmitter. The MultiPoint II Level Control is available in integral or remote mounted versions with standard explosionproof or optional NEMA 4X housings. Choose the configuration that best suits your needs.
Open the catalog to page 1Specifications Power Requirements 95-145 Vac 50/60 Hz 1 watt or 205-255 Vac 50/60 Hz 1 watt. Level Output (3) DPDT relays:one with 0-90 second adjustable time delay, one on/off, one with adjustable differential*. *Adjustable differential can be selected as a locked band.The differential remains the same, even if the setpoints are moved. Contact Ratings 120 Vac; 5A non-inductive, 3A inductive. Min. Rating 100 mA/ 12VDC. Operating Temperature (Electronics) -40°F to 140°F (-40°C to 60°C). Operating Point Range 0-200 ft (depending on sensing elements) Range selection: Four-position adjustable...
Open the catalog to page 2All AMETEK Drexelbrook catalogs and technical brochures
-
ClearLine Series
2 Pages
-
1500 SERIES RELAY
2 Pages
-
7014 and 7010 Series
2 Pages
-
Unifloat Level Sensors
9 Pages
-
Universal IV ™ CM Model
8 Pages
-
Model 375
4 Pages
-
Model 575 Series
5 Pages
-
Model 575P
4 Pages
-
Model 675
5 Pages
-
Dumpstar Series
2 Pages
-
Plugged Chute Detector
4 Pages
-
Universal II Series
2 Pages
-
Level Mate III
4 Pages
-
Model 575S
5 Pages
-
Model SST Slim-Line
4 Pages
-
Model SDT
4 Pages
-
Total Tank Level System
6 Pages
-
Drexelbrook Level Measurement
16 Pages
-
DR6300 Series
17 Pages
-
DR5200 Series
17 Pages
-
DR7000 Series
4 Pages
-
Z4-Series
6 Pages
-
Universal IV Sales Brochure
10 Pages
-
Coal and Fly Ash Solutions
6 Pages
-
RXL Series, IntelliPoint
4 Pages
-
401-400 Series
4 Pages
-
Model DDMC
8 Pages
-
Accessories Drexelcage
2 Pages
-
Point Level
5 Pages
Archived catalogs
-
USonic™ Series
4 Pages
-
PNT Series, ThePoint
4 Pages
-
Model SDT
4 Pages
-
701X Series Data Sheet
2 Pages
-
CM3 Series Cut Monitor
4 Pages
-
DR7000
4 Pages