DATA SHEET Submersible Level Transmitter Model SST Slim-Line Transmitter silicone potted for moisture protection Description TThe Model SST Submersible Level Transmitter provides the same high quality level measurement capability as our other level products, but in a smaller package. The 0.69 inch diameter housing allows the unit to fit into small bore applications. The simple design and rugged construction of this solid state instrument provide long lasting service with virtually no maintenance. The Model SST Transmitter indicates the level of liquid by continuously measuring hydrostatic pressure via its sensing element, an ion implanted silicon semiconductor chip with an integral Wheatstone Bridge. Once the sensor measures the pressure, the data is transmitted by a 4 to 20 mA two wire output signal. This design provides for excellent linearity and repeatability, low hysteresis and long term stability. The Model SST is easy to install, too. Simply lower the transmitter into a vessel or well. It's that easy. All the electronics are mounted in a submersible 316 stainless steel housing. The transmitter is available calibrated for any span needed, from 0 to 15 psi or 0 to 1 bar (0 to 34 feet or 0 to 10.5 meters of water) to 0 to 150 psi or 0 to 10 bar (0 to 345 feet or 0 to 105 meters of water). Features • 0.69 inch diameter to fit in small bore systems • Solid state semiconductor sensor for accuracy and reliability • Rugged 316 stainless steel diaphragm and housing with excellent environmental protection • Easy to install and use • Removable, non clogging snubnose end protects sensing elements • 2 wire 4 to 20 mA output • Silicone potted internally and at cable end for moisture protection • Reverse polarity, surge, and lightning protection • Anti-snag feature for easy probe removal Applications • 0.69 inch diameter to fit in small bore systems • Solid state semiconductor sensor for accuracy and reliability • Rugged 316 stainless steel diaphragm and housing with excellent environmental protection • Easy to install and use • Removable, non clogging snubnose end protects sensing elements • 2 wire 4 to 20 mA output • Silicone potted internally and at cable end for moisture protection AMETEK’ DREXELBROOK www.Drexelbrook.

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Model SST Slim-Line Submersible Level Transmitter Submersible Level Transmitter SPECIFICATIONS Specifications POLYETHYLENE VENT TUBE Power Supply: 11 to 30 VDC with reverse polarity Loop Resistance: 900 ohms maximum surge protection Temperature Range: Loop Resistance: 900 ohms maximum Ambient Operating: -13° to 167°F (-15° to 75°C) for liquids Temperature Range: BARB PLUGS INTO VENT TUBE ON CABLE CABLE LENGTH SPECIFIED BY CUSTOMER Media must not freeze! Ambient Operating: -13° to 167°F (-15° to 75°C) for Burst Pressure: 150% of full scale...

Product Data ELECTRONIC PRESSURE MEASUREMENT PRODUCTS Model SST Slim-Line Submersible Level Transmitter Submersible Level Transmitter Model Numbering Model Numbering: SST level transmitter SST Slim-line submersible level transmitter Sensing port S 9/16-18 thread with Delrin snubnose Input /output B 11 to 30 VDC/4 to 20 mA Pressure ranges* (enter as PSI or BAR range) PSI 0006 0015 0030 0060 0100 0150 Reference Equivalents 0-13.8 ft. water 0-34.6 ft. water 0-69.2 ft. water 0-138 ft. water 0-230 ft. water 0-345 ft. water 0-4.2 meters water 0-10.5 meters water 0-21.1 meters water 0-42.2 meters water...

Model SDT Submersible Level Transmitter Display Meters, Surge Protectors, Junction Boxes and Desiccants DISPLAY METERS AND SYSTEMS Model DDMC Digital Meter/Controller Dual display meter provides power to the sensor with alarm and 4-20 mA analog output options. Standard panel mount housing or a NEMA 4X weathertight housing for field mounting is available. The weathertight housing also provides internal mounting locations for lightning and surge protectors. LEVEL MATE™ III Level Measurement System The complete LEVEL MATE III system includes a level sensor (various models are available), cable and...