1. Catalogs
  2. AMETEK Drexelbrook
  3. Magnetostrictive Level Measurement DM231 Series

Magnetostrictive Level Measurement DM231 Series

Magnetostrictive Level Measurement DM231 Series

Magnetostrictive Level Measurement DM231 Series

Product catalog summary
Overview: The DM231 Series is a magnetostrictive liquid level sensor with Modbus RTU protocol, designed for accurate measurement of total level, interface level, and temperature. It features a digital output for system diagnostics and is explosion-proof, suitable for hazardous area installations.
Specifications:
  • Accuracy: 0.01% of measured span, less than 1 mm absolute.
  • Operating Voltage: 10 - 30 VDC.
  • Output Signal: Modbus RTU/ASCII, optional 4-20mA analog via converter.
  • Temperature Range: Process: -40°F to 257°F; Ambient: -40°F to 185°F.
  • Pressure Rating: 316SS tube up to 1000 psig; floats typically up to 350 psig.
  • Resolution and Repeatability: +/- 0.0001”.
  • Enclosure Rating: IP66, NEMA 4-4X.
  • Probe Length: 20” to 288” in 1” increments.
  • Hazardous Area Approvals: FM, CSA, ATEX.
Features:
  • No calibration needed for installation.
  • Unique diagnostic output for float position and loss detection.
  • Explosion-proof design with FM, ATEX, and CE approvals.
  • Field programmable span with a variety of floats and mounting accessories.
Installation and Configuration:
  • Available in 316SS rigid designs with single or dual NPT mountings.
  • Includes an explosion-proof condulet housing with a wiring terminal strip.
  • Temperature sensors are evenly distributed over the active length of the tube.
Model Numbering: The model numbering system includes options for fittings, maximum span, temperature points, output signals, overall length, style/mounting, and accessories.
Contact Information: For more details, visit www.Drexelbrook.com or contact via phone at +1 215-674-1234 or email at [email protected].
See more

Catalog excerpts

Magnetostrictive Level Measurement DM231 Series-1

DATA SHEET DM231 Series with Modbus RTU Protocol Magnetostrictive Liquid Level Sensor Modbus RTU digital output for total level, interface level, temperature and system diagnostics Accurately Measures: Proven Magnetostrictive Sensing Performance with Field Programmable Span. • Total Level • Interface Level • Temperature - 5 sensors over active range. Easy Installation High Accuracy DM231 Magnetostrictive Liquid & Interface Level Sensor with Temperature outputs Sensors are available in 316SS rigid designs with a choice of Single or Dual NPT mountings. Systems include an explosion-proof condulet housing containing a wiring terminal strip. All systems offer totally welded construction. The DM231 is an Explosion Proof sensor with Modbus digital output (optional analog output converter available) for total level, interface level and temperature sensor outputs. Temperature sensors are evenly distributed over the active length of the rigid 316SS tube. • 0.01% of measured span - less than 1 mm absolute, over full measurement range. Minimal Maintenance • Unique diagnostic output provides float position beyond active range, as well as loss of float(s). Explosion Proof Design • Meets FM approved for Class 1 Div. 1, Zone 1 Explosion Proof hazardous area installations • ATEX and CE Approvals A variety of floats and mounting accessories are available to fit virtually any application. Contact your local representative to match your needs today.

 Open the catalog to page 1
Magnetostrictive Level Measurement DM231 Series-2

Specifications Technology: • Magnetostrictive Calibration: • None Operating Voltage: • 10 - 30 VDC Output Signal: • Modbus RTU / ASCII • 4-20mA analog (Via Optional Converter) Response Time: • 1.0 Second Temperature Range: • Process: -40°F to 257° F +/-1° F (-40° C to 125° C +/- 0.5° C) • Ambient: -40° F to 185° F (-40°C to 85°C) Pressure Rating: • 316SS tube: 1000 psig. (69 bar) • Float: Dependant, 316SS floats typical to 350 psig, (24 bar) consult factory Resolution: • +/- 0.0001” Repeatability: • +/- 0.0001” Accuracy: • Level: 0.01% or +/- 0.023” (0.06mm) which ever is greater • Temperature:...

 Open the catalog to page 2
Magnetostrictive Level Measurement DM231 Series-4

Phone: +1 215-674-1234 • Fax: +1 215-674-2731 E-mail: [email protected] 205 Keith Valley Road | Horsham PA 19044 U.S.A. AMETEK DREXELBROOK www.Drexelbrook.com

 Open the catalog to page 4

All AMETEK Drexelbrook catalogs and technical brochures

  1. Model 375

    4  Pages

  2. Model 575P

    4  Pages

  3. Model 675

    5  Pages

  4. Model 575S

    5  Pages

  5. Model SDT

    4  Pages

  6. DR6300 Series

    17  Pages

  7. DR5200 Series

    17  Pages

  8. DR7000 Series

    4  Pages

  9. Z4-Series

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.