DATA SHEET Level Measurement System Description The AMETEK LEVEL MATE III Level System uses a stainless steel transmitter as standard. A series of perforations in the bottom of the unit protects the sensing port from either clogging or damage. The same snub-nosed end can also unscrew, allowing for easy calibration checks. The customized LEVEL MATE III meter displays data from the transmitter, provides excitation voltage and transmits an analog signal for remote recording, alarm or control functions. It is easy to calibrate by front panel adjustments. Its programmable relay permits set and reset programming. The large, easy-to-read LED display gives local indication while the optional isolated analog output can interface with ancillary display, recording or control devices. Combined into one convenient package, the AMETEK LEVEL MATE III Level System provides you with the most versatile level measurement system on the market! Features • Two-year factory warranty on the system • Intrinsically safe (Model 575S, 575P and 675) • Solid-state silicon sensor with milliamp output • Rugged stainless steel sensor housing -excellent environmental protection • Excellent media compatibility • Sensor vented to the atmosphere through the surface end of the cable • Microprocessor-controlled meter for quick, easy setup and calibration • Large dual line 6 digit display, 0.60” & 0.46” • Selectable setup via front keys • Programmable displays and function keys • Meter can be calibrated for inches of water, feet of water, meters of water, or any desired engineering units • Multi pump alternation control • Options Include Lightning and secondary surge protectors 4 relay expansion module Meter copy programming cable 4-20 mA analog output from meter USB serial communication kit for configuring, monitoring and datalogging from a PC using DDMC MeterView software Applications Complete easy-to-use system - all in one package Variety of reliable stainless steel sensors Microprocessor-controlled digital display Setpoints and signal outputs for remote monitoring, recording and control Continuous measurement and display Simple installation, virtually no maintenance Low system pricing AMETEK’ DREXELBROOK www.Drexelbrook.co

Specifications: for model 575 as standard sensor, see specific datasheets for other sensor specs. Ranges: • Feet of Water: 0 to 14, 0 to 35, 0 to 69, 0 to 138, 0 to 230, 0 to 345, 0 to 460, 0 to 690 • Meters of Water: 0 to 4, 0 to 10, 0 to 21,0 to 42, 0 to 70, 0 to 105, 0 to 140, 0 to 210 Transmitter Temperature Ranges: • Max. Operating: -40° to 82°C (-40° to 180°F); media must not freeze • Compensated: -5° to 55° C (23° to 130°F) • Temp. Effects: Typical ±1% output change for ±25° C temp. change within compensated range when calibrated at 25°C • Accuracy: ±0.25% full scale (including linearity, hysteresis,...

DELRIN SNUB DELRIN SNUB NOSE NOSE Level Mate III Level Mate III Model Code Model Code Numbering Base Model Base Model LM LM CABLE SUPPORT CABLE BRACKET SUPPORT BRACKET 7/8 HEX NUT 7/8 HEX NUT 1.17 1.17 Sensor Type 5Sensor Type 5 DELRIN SNUB DELRIN SNUB NOSE NOSE .250 .250 CABLE SUPPORT CABLE SUPPORT BRACKET BRACKET 7/8 HEX NUT 7/8 HEX NUT other power & relay options available, consult factory Meter Output other power & relay options available, consult factory Meter Output 2 relays A A 2 4-20mA output (specify output & calibrated range) B 2 relays,relays B 2 relays, 4-20mA output (specify output...

Level Mate III Level Mate III Dimensions 4 THIS DRAWING IS THE PROPERTY OF AMETEK INC. ALL RIGHTS ARE RESERVED AND NEITHER THIS DRAWING NOR ANY INFORMATION IT CONTAINS IS TO BE COPIED, REPRODUCED, DISCLOSED TO OTHERS, OR USED WITHOUT WRITTEN PERMISSION FROM AMETEK INC. LIMITS OF ACCEPTABLE WORKMANSHIP ARE DEFINED IN MS-645-A. .31X4 MOUNTING HOLE SIZE IN BOX DELRIN SNUB NOSE SST SENSOR SCALE=1:3 .250 HOLE PATTERN FOR MOUNTING CABLE SUPPORT BRACKET NEMA 4X DIGITAL METER 6 DIGIT DISPLAY, 0.6 HIGH 6 DIGIT ALPHA-NUMERIC DISPLAY, 0.45 HIGH DELRIN SNUB NOSE 375 & SDT SENSOR SCALE=1:3 .250 CABLE SUPPORT...