Drexelbrook Level Measurement
1 / 16Pages

Level and Analytical Solutions Provider Reliability • Service • Quality www.drexelbrook.c

For Considering AMETEK Drexel brook WE want to thank you for considering AMETEK Drexelbrook for your level measurement needs. We’ve earned our reputation as the world leader in level measurement technology by providing reliable and accurate level solutions to virtually every industry. OUR reputation for excellence stems from our pioneering work in RF Admittance level instrumentation. We have discovered in our over fifty years of experience that there is no single technology that is appropriate for all application needs. Today, we provide solutions using nine different level...

Radar Radar is a non-contacting, continuous level technology. There are two types of radar transmission methods: Pulsed Time of Flight (PTOF) and Frequency Modulated Continuous Wave (FMCW). PTOF transmits periodic electromagnetic pulses and, like ultrasonic, measures the transit time. FMCW, the method used by AMETEK Drexelbrook, continuously transmits an electromagnetic wave to the surface of the process material and compares the transmitted frequency versus the received frequency. The electromagnetic wave is constantly in contact with the process surface which results in more power applied...

One – R­­­­­F ADMITTANCE IntelliPoint RF™ Our versatile point level switch for liquids, slurries, granulars, and interface applications. With the IntelliPoint, simply install the sensor in your vessel and connect the power. The IntelliPoint, with an AutoRanging power supply, automatically calibrates itself. The self-test function of the IntelliPoint insures proper system operation. An AutoVerify™ self check circuit continuously monitors the complete system ­ to verify it is functioning properly. The ma nual Certify™ not only checks the function of the system, but also checks the AutoVerify...

Plugged Chutes These sensors mount flush to the chute wall and detect when the product plugs the chute. This is an excellent solution for aggregate, mining, pulp and paper, and coal handling solutions. Spill Prevention RF, vibration or ultrasonic VeriGAP™-High and High-High point level indication for spill/overfill protection. Drexelbrook point level products meet EPA, OSHA, NFPA, and API recommendations for spill prevention. RF point level is the best technology for detecting the interface between two electrically dissimilar liquids such as oil and water. Power Plant and Coal Preparation...

4 = YES 5 = NO = Consult Factory

Conductivity Switch Float Switch Plugged Chute Detector POWER SUPPLY Line Power Auto Verify™ Certify™ Remote Mounting Available

One – RF ADMITTANCE Universal IV RF Admittance Systems Drexelbrook’s years of application know-how with RF Admittance technology has enabled us to compile the most extensive database of application information in the level measurement industry. RF Admittance technology provides the basis for improved level measurement in the most difficult process environments. Two – ULTRASONIC USonic™ and USonic­ -R ™ Integral or Remote Mounting Option Our family of Ultrasonic technology products offers a 2-wire and line powered version for non-contact level measurement of liquids and slurries for level,...

Interface Measurements RF Admittance has a long-standing reputation as a proven technology when making difficult interface measurements. Recent developments in TDR have also made this technology a viable solution for some interface applications. RF level is the time proven, best available technology for indication and control of process interface level. RF technology inherently provides the greatest accuracy and repeatability in interface measurements independent of density changes. Variations in the material make-up of upper and lower liquid phase will have no appreciable effect on system...

& = Consult Factory Hydrostatic Line Power Bench Calibration UNDEDICATED PROTOCOLS SERVICE POWER SUPPLY Guided Wave Radar

Applications Automatic Well Testing (AWT) Lease Automatic Custody Transfer (LACT) Basic Sediment and Water (BS&W) Separation Vessels Pipeline Slug Detection Truck Unloading Pump Protection Dielectric Analysis Machinery Lube Oil Monitoring Easy Configuration - Now with Built-in LCD Display and Keypad All Universal IV CM's factory pre-calibrated and requires only one point validation. Field configuration can be done from anywhere along the two-wire loop with our HARTWin PC Software. You can also configure via local display / keypad without the need for laptop or handheld...

Operating Principle The method of using RF Admittance to measure water cut is widely successful because of the large difference between the dielectric constants of oil (k ˜˜ 2.3) and water (k ˜˜ 80). The sensing element and the pipe wall form the necessary two surfaces of the concentric capacitor. The system electronics transmit a radio frequency voltage to the sensing element that measures changes in capacitance. As the amount of water in the flowing oil increases, the net dielectric of the fluid increases which causes the capacitance to increase. The onboard electronics will compute the...

Impulse Guided Wave Radar The Impulse Guided Wave Radar employs field proven TDR (Time Domain Reflectometry) technology to provide accurate measurement of Total Level, Distance, or Volumetric outputs on all liquids and slurries. TDR Technology has been widely used for its inherent ability to remain unaffected by variations in the process materials electrical characteristics. AMETEK Drexelbrook has harnessed the technology with easy to use configuration menus in plain language. You will have the measurement you need, configured within minutes. FEATURES • 3mm accuracy and 1mm resolution • <1...

USonic The USonic makes measurements on level, distance, volume, or open channel. This affordable, 2-wire transmitter uses SMARTGain technology that automatically ignores most internal obstructions with no user adjustments required. FEATURES • 30 ft range (9.1 meters) • Accuracy: ±0.15% or 0.2 inch of sensor range, whichever is greater • 300 millisecond response time • SMARTGain™ eliminates interfering signals from agitators and other internal vessel obstructions • Unique pipe software for stilling well applications • PC or HART communicator configuration • Compact transducer design allows...