Group: Ametek LMS
Catalog excerpts
AUTOMATION & PROCESS TECHNOLOGIES Series 5400 B/W Controls Plug In Style Liquid Level Control Relay COMPACT PLUG IN STYLE RELAY B/W Series 5400 Relays were developed especially for use as safe, reliable, economical original equipment components in many different types of commercial and industrial products. Designed to operate from electrodes or probes contacting conductive liquids, they are ideally suited to level control applications in such products as vending, dispensing, ice-making machines, water softeners, dishwashers, and coffee makers, plus many type of operating equipment in the food, drug, dairy, brewing, distilling and chemical processing industries. In addition, Series 5400 Relays have a low energy sensing circuit with a lock-in holding feature that permits operation over a range of levels, or from momentary contact pilot devices such as float, actuators, etc. Thus they are equally suitable for use as original equipment components in many products and systems that require monitoring and control of such process variable as temperature, pressure, humidity, flow, voltage and current, etc. OTHER FEATURES AND ADVANTAGES • UL Recognized Component File No. E61377 • CUL File No. LR 33434 • Choice of direct or inverse operation to provide failsafe control. In direct operation, load relay is energized when the low voltage ac sensing circuit is completed. In inverse operation, load relay is de-energized when the low voltage ac sensing circuit is completed. • LED indicates when relay is energized. • Relays will operate reliably when mounted in any position required to meet a complete range of application design requirements. • Relays will operate over ambient temperature range from -10° + 131°F (-23° to 55 °C). • User adjustable sensing resistance. • Rugged octal plug-in housing. • Heavy-duty internal construction. B/W Controls Series 5400 Liquid Level Controls Single Probe (Direct Operation) Cat. No.: 5400-A-L1 Voltage: 120 VAC Sensitivity range: 1 K to 250K ohms BASIC SPECIFICATIONS Voltage: 120 volts ac, 50/60 hertz 240 volts ac, 50/60 hertz 24 volts ac, 50/60 hertz (special order) 1.2 volt-amperes max. Single pole, double throw. Silver Cadmium Oxide 10 amps resistive load or 1/3 hp at 120 volts ac; 6 amps at 240 volts ac or 28 volts dc. Min. load 100 mA at 5 VDC. 18 VAC RMS max. 2.0 mA RMS max. Adjustable 1K to 250K ohms +/- 10%. Factory set at 100k OHMS +/- 10%. 8 pin octal base socket (sold separately) 5 seconds +/- 10%, other delay times available on 5400-A and 5400-B series only. NOTE: All line voltage circuits are isolated from the low voltage ac sensing circuit to assure optimum safety in service. DISCONNECT POWER BEFORE SERVICING Power Required: Load Contacts: Contact Ratings: Sensing Voltage: Sensing Current: Sensitivity: Mounting: Time Delay: AMETEK Clawson, MI 48017 U.S.A. 5400- STRAP Series 5400 Relay Dimensions .065±.015 J
Open the catalog to page 1TYPICAL APPLICATIONS Diagrams at right illustrate basic details of typical application in which Series 5400 Relays are used as original equipment components to provide fail-safe control by de-energizing the load in event of power of relay failure. In Diagram 1, Type 5400-A Relay is used in direct operation to provide high-level alarm. In Diagram 2, Type 5400-B Relay is used in inverse operation to provide low-level alarm. ACCESSORIES The 5400 relays require a standard 8 pin octal base for mounting. In addition a hold down strap is also available to secure the 5400 the relay to the octal...
Open the catalog to page 2All AMETEK Drexelbrook catalogs and technical brochures
-
Multipoint II Series
2 Pages
-
ClearLine Series
2 Pages
-
1500 SERIES RELAY
2 Pages
-
7014 and 7010 Series
2 Pages
-
Unifloat Level Sensors
9 Pages
-
Universal IV ™ CM Model
8 Pages
-
Model 375
4 Pages
-
Model 575 Series
5 Pages
-
Model 575P
4 Pages
-
Model 675
5 Pages
-
Dumpstar Series
2 Pages
-
Plugged Chute Detector
4 Pages
-
Universal II Series
2 Pages
-
Level Mate III
4 Pages
-
Model 575S
5 Pages
-
Model SST Slim-Line
4 Pages
-
Model SDT
4 Pages
-
Total Tank Level System
6 Pages
-
Drexelbrook Level Measurement
16 Pages
-
DR6300 Series
17 Pages
-
DR5200 Series
17 Pages
-
DR7000 Series
4 Pages
-
Z4-Series
6 Pages
-
Universal IV Sales Brochure
10 Pages
-
Coal and Fly Ash Solutions
6 Pages
-
RXL Series, IntelliPoint
4 Pages
-
401-400 Series
4 Pages
-
Model DDMC
8 Pages
-
Accessories Drexelcage
2 Pages
-
Point Level
5 Pages
Archived catalogs
-
USonic™ Series
4 Pages
-
PNT Series, ThePoint
4 Pages
-
Model SDT
4 Pages
-
701X Series Data Sheet
2 Pages
-
CM3 Series Cut Monitor
4 Pages
-
DR7000
4 Pages