Group: AMETEK Sensors, Test & Calibration
Catalog excerpts
Circular Adhesion Grips These grips come with a detachable upper and lower circular plate made of hardened steel. Ball socket mounting screws keep the top plate and bottom plates parallel and perpendicular to the applied force. > Friction, Peel& AdhesionGrips Includes upper and lower grip. > Used for general purpose adhesion testing. > Shouldered Grip for Adhesive Tests This grip consists of 2 bobbin holders with a slot in the shoulder to allow the bobbins to be easily inserted. The adhesive to be tested is applied to the square surface of the bobbins then the bobbins are held together until the adhesive has set. The assembly is then slid into the slots of each holder and the tensile test performed. The grip is supplied complete with 6 bobbins so 3 tests can be performed. After each test, the adhesive has to be removed ready for the next test.The bobbins are also suitable for sealants and mastics. > Includes upper and lower bobbin holders and includes six bobbins. > Designed to meet ISO4624-1978 and BS3900:PartE10:1979 (pull off test for adhesion). > Determining the adhesion of adhesives, sealants and mastics by measuring the minimum tensile stress necessary to detatch or rupture the coating. > Note: See pages 93-113 for adapters required to fit grips to force gauges, loadcells, and test stands. Note: The GF-8 is supplied with the following adapters formounting to some force gauges, loadcells and test stands.Part NumberCoupling, 1/4-20Fx 5/16-18F17056 Coupling, 1/4-20Fx #10-32F17057 Adapter, 1/4-28 x 3/8-1621046-1 Adapter, #10-32 x 3/8-1621046-2See pages 93-113 for additional adapters required. ModelPart No.Description GF-8GF-8Circular Adhesion Testing Grips - 2.5 kN (562.5 lbf) TG13601/1584Shouldered Grip for Adhesive Tests - 5 kN (1124 lbf) > www.lloyd-instruments.co.uk56 size="-2">
Open the catalog to page 1All AMETEK Chatillon catalogs and technical brochures
-
DFS II R Series
8 Pages
-
Pneumatic Grips
57 Pages
-
343
3 Pages
-
332
3 Pages
-
LS1
4 Pages
-
DFE II Series
5 Pages
-
FORCE MEASUREMENT INSTRUMENTS
44 Pages
-
CS2
8 Pages
-
TCM Series
7 Pages
-
DMG Series
3 Pages
-
MSE100 Series
3 Pages
-
DFX II Series
5 Pages
-
DFS II Series
8 Pages
-
DG Series
5 Pages
-
LD Brochure
12 Pages
-
Model 329 Compact Load Cell
3 Pages
-
Chatillon DPPH Series
2 Pages
-
Universal Material Tester
2 Pages
-
Portable Bench Beam Scales
2 Pages
-
7-inch Dial Hanging Scales
2 Pages
-
Mechanical Dynamometer
2 Pages
-
Drill Chuck
1 Pages
-
3-Point Bending Jig
1 Pages
-
Circular Adhesive Plates
1 Pages
-
Mechanical Force Tester
2 Pages
-
Digital Force Gauge
4 Pages
-
Mechanical Force Gauge
2 Pages
Archived catalogs
-
Chatillon Scales Product Catalog
52 Pages