Group: AMETEK Sensors, Test & Calibration
Catalog excerpts
Pneumatic Grips Pneumatic operated grips All pneumatic grips are suitable for use with the foot and hand controls Stainless Steel Temperature range -70 – to +280⁰ C (Other temperatures on request) Specialist wedge grip with wide temperature range, suitable for use in a thermal cabinet due to air supply connections are kept away from the body of the grip and outside the chamber. Different length extension rods are available on request and should be specified in mm from the top of the grip body to the load cell connecting point Part Number 01/4354 Wedge grip, without faces for thermal cabinet 30mm x 40mm, crosscut faces, 0mm – 6mm opening 30mm x 40mm, crosscut faces, 6mm – 12mm opening 30mm x 35mm, crosscut faces, 10mm – 16mm opening Face options Part Number 01/4355 01/4356
Open the catalog to page 1Pneumatic Grips Pneumatic operated grips All pneumatic grips are suitable for use with the foot and hand controls Stainless Steel Temperature range 0 – to +70⁰ C Part Number 01/4358 Wedge grip, without faces Face options Part Number 01/4359 01/4360 01/4361 01/4362 60mm x 45mm, Cross-Cut faces 0mm - 8mm opening 60mm x 45mm, V-notch faces 3mm - 8mm opening 60mm x 45mm, Cross-Cut faces 7mm - 15mm opening 60mm x 45mm, V-notch faces 7mm - 13mm opening
Open the catalog to page 2Pneumatic Grips Pneumatic operated grips All pneumatic grips are suitable for use with the foot and hand controls Stainless Steel Temperature range 0 – to +70⁰ C Part Number 01/4363 Wedge grip, without faces 60mm x 67mm, crosscut faces, 0mm – 13mm opening Face options Part Number 01/4
Open the catalog to page 3Pneumatic Grips Pneumatic operated grips All pneumatic grips are suitable for use with the foot and hand controls Stainless Steel Temperature range 0 – to +70⁰ C Part Number 01/4365 Wedge grip, without faces 60mm x 67mm, crosscut faces, 0mm – 10mm opening 60mm x 67mm, crosscut faces, 10mm – 20mm opening Face options Part Number 01/4366 01
Open the catalog to page 4Pneumatic Grips Pneumatic operated grips All pneumatic grips are suitable for use with the foot and hand controls Stainless Steel Temperature range 0 – to +350⁰ C Specialist wedge grip with wide temperature range, suitable for use in a thermal cabinet due to air supply connections are kept away from the body of the grip and outside the chamber. Different length extension rods are available on request and should be specified in mm from the top of the grip body to the load cell connecting point or machine base Care when ordering is required when using in a thermal cabinet that all dimensions...
Open the catalog to page 5Pneumatic Grips Pneumatic operated grips All pneumatic grips are suitable for use with the foot and hand controls Stainless Steel Temperature range 0 – to +350⁰ C Specialist wedge grip with wide temperature range, suitable for use in a thermal cabinet due to air supply connections are kept away from the body of the grip and outside the chamber. Different length extension rods are available on request and should be specified in mm from the top of the grip body to the load cell connecting point or machine base Care when ordering is required when using in a thermal cabinet that all dimensions...
Open the catalog to page 6Pneumatic Grips Pneumatic operated grips All pneumatic grips are suitable for use with the foot and hand controls Stainless Steel Temperature range 0 – to +350⁰ C Specialist wedge grip with wide temperature range, suitable for use in a thermal cabinet due to air supply connections are kept away from the body of the grip and outside the chamber. Different length extension rods are available on request and should be specified in mm from the top of the grip body to the load cell connecting point or machine base Care when ordering is required when using in a thermal cabinet that all dimensions...
Open the catalog to page 7Pneumatic Grips Pneumatic operated grips Thin wire bollard grip, ideally it should be used with an extensometer to calculate true strain in the sample. The 01/4374 is designed for thin wires and is best used with the diamond faces the sample can be wrapped around the bollard then doubled back on itself for additional gripping. The grip is fitted with carriers which act as a mounting place for the faces which are supplied separately Manually adjusted from one side pneumatic actuator on the other All pneumatic grips are suitable for use with the foot and hand controls Aluminium Anodised...
Open the catalog to page 8Pneumatic Grips Pneumatic operated grips A pneumatic grip for use with wire, yarns, threads, small diameter ropes and strapping, fixed face on one side and pneumatic face on the other, faces are rubber All pneumatic grips are suitable for use with the foot and hand controls Connection M5 internal thread Aluminium Anodised Temperature range 0 – to +80⁰ C (Other temperatures on request) Wire, Yarn and Thread grip with 20mm x 10mm rubber faces, sample width 0 – 2mm Ø and up to 7mm wide, 20mm Ø drum
Open the catalog to page 9Pneumatic Grips Pneumatic operated grips A pneumatic grip for use with wire, yarns, threads, small diameter ropes and strapping, fixed face on one side and pneumatic face on the other, faces are diamond coated All pneumatic grips are suitable for use with the foot and hand controls Connection M5 internal thread Aluminium Anodised Temperature range 0 – to +80⁰ C (Other temperatures on request) Wire, Yarn and Thread grip with 20mm x 10mm diamond faces, sample width 0 – 2mm Ø and up to 7mm wide, 20mm Ø drum
Open the catalog to page 10Pneumatic Grips Pneumatic operated grips A pneumatic grip for use with wire, yarns, threads, small diameter ropes and strapping, fixed face on one side and pneumatic face on the other, faces are rubber coated All pneumatic grips are suitable for use with the foot and hand controls Connection M5 internal thread Aluminium Anodised Temperature range 0 – to +80⁰ C (Other temperatures on request) Wire, Yarn and Thread grip with 30mm x 12mm crosscut faces, sample width 0 – 2mm Ø and up to 7mm wide, 40mm Ø drum
Open the catalog to page 11Pneumatic Grips Pneumatic operated grips A pneumatic grip for use with wire, yarns, threads, small diameter ropes and strapping, fixed face on one side and pneumatic face on the other, faces are diamond coated All pneumatic grips are suitable for use with the foot and hand controls Connection M5 internal thread Aluminium Anodised Temperature range 0 – to +80⁰ C (Other temperatures on request) Wire, Yarn and Thread grip with 30mm x 12mm diamond faces, sample width 0 – 2mm Ø and up to 7mm wide, 40mm Ø drum
Open the catalog to page 12All AMETEK Chatillon catalogs and technical brochures
-
DFS II R Series
8 Pages
-
343
3 Pages
-
332
3 Pages
-
LS1
4 Pages
-
DFE II Series
5 Pages
-
FORCE MEASUREMENT INSTRUMENTS
44 Pages
-
CS2
8 Pages
-
TCM Series
7 Pages
-
DMG Series
3 Pages
-
MSE100 Series
3 Pages
-
DFX II Series
5 Pages
-
DFS II Series
8 Pages
-
DG Series
5 Pages
-
LD Brochure
12 Pages
-
Model 329 Compact Load Cell
3 Pages
-
Chatillon DPPH Series
2 Pages
-
Universal Material Tester
2 Pages
-
Portable Bench Beam Scales
2 Pages
-
7-inch Dial Hanging Scales
2 Pages
-
Mechanical Dynamometer
2 Pages
-
Drill Chuck
1 Pages
-
3-Point Bending Jig
1 Pages
-
Circular Adhesive Plates
1 Pages
-
Mechanical Force Tester
2 Pages
-
Digital Force Gauge
4 Pages
-
Mechanical Force Gauge
2 Pages
Archived catalogs
-
Chatillon Scales Product Catalog
52 Pages