Group: AMETEK Sensors, Test & Calibration
Catalog excerpts
Speci cation Sheet SS-FM-3118-0105January 2005 The TT Series is a pneumatically-operated tester for measuring breaking strength of electrical leads, terminals, connectors, wire wraps, etc. It is ideal for arreas where intrinsic safety is required (when used with a mechanical gauge). The TT Tester operates using clean, dry air with a maximum air pres-sure up to 160 psig (11.2 bar). The TT Tester meets MIL-T-7928 (ASG) requirements for crimped, solderless lugs. The tester may be used for tensile or compression testing. The rapid test speed makes it ideal for production line testing, incoming inspection testing or for the R&D laboratory. The TT Tester features a 6-inch (15 cm) test stroke. Ram speed may be controlled as low as 0.1-inch (2.5 mm) per minute. The TT Tester is available in two models: one with a foot-actuated switch; the other with a hand-actuated switch. > Easy to Use, Rugged Construction Meets MIL-T-7928 (ASG) Requirements 6-inch (15 cm) Stroke Precision Ram Speed Control to 0.1-inch/min Independent Return Speed Automatic Retracting Steel ZJaw Maintenance-free Design 1 Year Warranty > Speci cations Capacity: 550 lbf (2500 N) Speciment Capacity: From 1-inch to 15-inches (25.4 to 381 mm) Length 7/32-inch OD Crosshead Speed: Double Acting Ram 6-inch/min - Adjustable Rams Speeds to 0.1-inch/min > TT Series with DFE Series digital force gauge Travel: 6-inches (152 mm) - Jaw Opens to 7/32-inch (5.6mm) - Jaw Closes in 1/2-inch (12.7mm) Travel Load Measuring: Chatillon Force Gauge Air Motor: Requires 60 psi (4.2 bar) for 225 lbf (1 kN) Requires 125 psi (8.7 bar) for 550 lbf (2.5 kN) Maximum Air Pressure is 160 psi (11.2 bar) Operating Temp: 40 to 95 F (5 to 35 C) Weight: Approx. 33 to 52 lbs option dependent (15-24 kg) Warranty: 1 year >
Open the catalog to page 1Singapore AMETEK Singapore Pvt. Ltd.10 Ang Mo Kio Street 65#05-12 TechpointSingapore 569059Tel +65-484-2388Fax +65-481-6588Email aspl@ametek.com.sg Germany AMETEK Precision Instruments Europe GmbH Rudolf-Diesel-Strasse 16D-40670 MeerbuschGermanyTel +49-0-2159-9136-70Fax +49-0-2159-9136-80Email apie@ametek.dr France AMETEK Lloyd Instruments SAS3 avenue des Coudriers Zone dActivite de lҒObservatoire78180 Montigny-Le-BretonneuxFranceTel +33-1-3057-4774 Fax +33-1-3057-5033Email general@lloyd-instruments. > For the authorized Chatillon Distributor or Manufacturers Representative near you, go to...
Open the catalog to page 2All AMETEK Chatillon catalogs and technical brochures
-
DFS II R Series
8 Pages
-
Pneumatic Grips
57 Pages
-
343
3 Pages
-
332
3 Pages
-
LS1
4 Pages
-
DFE II Series
5 Pages
-
FORCE MEASUREMENT INSTRUMENTS
44 Pages
-
CS2
8 Pages
-
TCM Series
7 Pages
-
DMG Series
3 Pages
-
MSE100 Series
3 Pages
-
DFX II Series
5 Pages
-
DFS II Series
8 Pages
-
DG Series
5 Pages
-
LD Brochure
12 Pages
-
Model 329 Compact Load Cell
3 Pages
-
Chatillon DPPH Series
2 Pages
-
Universal Material Tester
2 Pages
-
Portable Bench Beam Scales
2 Pages
-
7-inch Dial Hanging Scales
2 Pages
-
Mechanical Dynamometer
2 Pages
-
Drill Chuck
1 Pages
-
3-Point Bending Jig
1 Pages
-
Circular Adhesive Plates
1 Pages
-
Mechanical Force Tester
2 Pages
-
Digital Force Gauge
4 Pages
-
Mechanical Force Gauge
2 Pages
Archived catalogs
-
Chatillon Scales Product Catalog
52 Pages