Motorized Force Tester with Digital Load Limits (110 lbf, 500N)
3Pages

{{requestButtons}}

Catalog excerpts

Motorized Force Tester with Digital Load Limits  (110 lbf, 500N) - 1

Specifi cation Sheet SS-FM-3130-0205February 2005 The CHATILLON > LTCM-100 Series is an economical, motorized tester ideal for production environments, research & development laboratories and qual-ity functions. The LTCM-100 may be used for tensile, compression, peel, and fl exural testing when combined with a Chatillon DF Series force gauge. A large working area and 5-inch (130mm) throat is perfect for large sample testing. The platform features pre-drilled holes for custom fi xturing or for use with Chatillon fi xtures. The crosshead travel is selectable in either inches per minute or millimeters per minute. The speed range is 0.2 to 20 inches/min (5 to 500 mm/min). A dial is used to set the speed requirement and a digital display indicates the speed selected to 0.1 resolution. Crosshead travel is 15 inches (380mm). An Up and Down switch is used to control crosshead travel direction. A simple switch setting can be used to reverse crosshead speed direction at maximum speed at the completion of a test. An emergency stop is located on the console for easy access. Mechanical limits may be set to stop crosshead travel at a specifi ed position. Rules are provided on the front face and crosshead face of the column for accurate placement and for measuring extension. Positive braking ensures a precise stop. > Tensile, Compressive, Peel & Flexural Testing Compact, Benchtop Design Simple Operation with Intuitive Controls - Crosshead Direction - Return Speed - Speed Selection - Emergency Stop - On/Off Mechanical Limits & Positive Braking Large Working Area and Throat for Large Samples Selectable Display with Digital Speed Readout - Inches per Minute - Millimeters per Minute 2 Year Warranty Specifi cations Capacity: 110 lbf (500N) Crosshead Speed: 0.2 to 20 in/min (5 to 500 mm/min) Speed Accuracy: +3% at Full Capacity Travel: 15-inches (380mm) Load Measurement: Chatillon Force Gauge Supply Voltage: 110/230Vdc Operating Temperature: 40ΰF to 110F (5аC to 45C) Weight: 39 lbs (17.7 kg) approx. >

Open the catalog to page 1
Motorized Force Tester with Digital Load Limits  (110 lbf, 500N) - 2

Easy Operation Independent Return Speed Simple and Accurate Speed Control A separate return speed switch can be positioned so that the crosshead returns to zero at maximum speed or at the speed indicated by the display. The LTCM-100 console controls are intuitive and easy to use. Users can specify speed in either inches per minute or millimeters per minute. The speed control knob is used to adjust speed from 0.2 to 20.0 in/min or 0.5 to 500 mm/min. Speed accuracy is better than 3%. The Up and Down key is used to control crosshead direction. Adjustable Defl ection Limits Defl ection limit...

Open the catalog to page 2
Motorized Force Tester with Digital Load Limits  (110 lbf, 500N) - 3

Singapore AMETEK Singapore Pvt. Ltd. 10 Ang Mo Kio Street 65 #05-12 Techpoint Singapore 569059 Tel +65-484-2388 Fax +65-481-6588 Email aspl@ametek.com.sg > Germany AMETEK GmbH Rudolf-Diesel-Strasse 16 D-40670 Meerbusch Germany Tel +49-0-2159-9136-70 Fax +49-0-2159-9136-80 Email apie@ametek.dr > France AMETEK Lloyd Instruments SAS 3 avenue des Coudriers Zone dԒActivite de lObservatoire 78180 Montigny-Le-Bretonneux France Tel +33-1-3057-4774 Fax +33-1-3057-5033 Email general@lloyd-instruments.com > For the authorized Chatillon Distributor or ManufacturerҒs Representative near you, go to...

Open the catalog to page 3

All AMETEK Chatillon catalogs and technical brochures

  1. 343

    3 Pages

  2. 332

    3 Pages

  3. LS1

    4 Pages

  4. CS2

    8 Pages

  5. TCM Series

    7 Pages

  6. DMG Series

    3 Pages

  7. DG Series

    5 Pages

  8. LD Brochure

    12 Pages

  9. Drill Chuck

    1 Pages

Archived catalogs