Group: AMETEK Sensors, Test & Calibration
Catalog excerpts
Specifi cation Sheet SS-FM-3025-0305March 2005 The CHATILLON > STS Series torque sensors are full-bridge strain gauge sensors complete with 15-pin plug. These sensors are used exclusively with the Chatillon DFS-R-ND Series digital indicator. ThesensorΒs torque values and sensitivity factors are stored in memory within the sensor plug. When connected to a DFS-R-ND indicator, the capacity and calibration points are automatically recognized by the instrument. The instrument then becomes a full-featured torque measurement instrument. The STS Series torque sensor meets ASTM E4 and BS EN ISO 7500 part 1 for a +0.3% accuracy sensor. The sensors are connected to the DFS-R-ND with a retractable cord that extends fully to nearly 9 ft. (3 m). > Remote Sensors- Torque Measurement Model in-oz N-cm in-lb kg-cm N-m STS-0003 50 x 0.005 35 x 0.005 3 x 0.0005 3.5 x 0.0005 0.35 x 0.0001 STS-0012 192 x 0.02 125 x 0.02 12 x 0.002 12.5 x 0.002 1.25 x 0.0002 STS-0050 800 x 0.1 500 x 0.05 50 x 0.005 50 x 0.005 5 x 0.0005 STS-0100 - 1000 x 0.1 100 x 0.01 100 x 0.01 10 x 0.001 STS-0200 - 2000 x 0.2 200 x 0.02 200 x 0.02 20 x 0.002 Specifi cations Input Resistance: 1100 ohms +100 Output Resistance: 1000 ohms +100 Rated Output: 2.0 mV/V Safe Overload: 150% Full Scale Non-Linearity: +0.1% Full Scale Hysteresis: +0.1% Full Scale Zero Balance: +1.0% Full Scale Operating Temp: 30 > C) DFS-R shown with STS Series torque sensor. >
Open the catalog to page 1Singapore AMETEK Singapore Pvt. Ltd. 10 Ang Mo Kio Street 65 #05-12 Techpoint Singapore 569059 Tel +65-484-2388 Fax +65-481-6588 Email aspl@ametek.com.sg Germany AMETEK GmbH Rudolf-Diesel-Strasse 16 D-40670 Meerbusch Germany Tel +49-0-2159-9136-70 Fax +49-0-2159-9136-80 Email apie@ametek.dr France AMETEK Lloyd Instruments SAS 3 avenue des Coudriers Zone dActivite de lҒObservatoire 78180 Montigny-Le-Bretonneux France Tel +33-1-3057-4774 Fax +33-1-3057-5033 Email general@lloyd-instruments. > For the authorized Chatillon Distributor or Manufacturers Representative near you, go to...
Open the catalog to page 2All AMETEK Chatillon catalogs and technical brochures
-
DFS II R Series
8 Pages
-
Pneumatic Grips
57 Pages
-
343
3 Pages
-
332
3 Pages
-
LS1
4 Pages
-
DFE II Series
5 Pages
-
FORCE MEASUREMENT INSTRUMENTS
44 Pages
-
CS2
8 Pages
-
TCM Series
7 Pages
-
DMG Series
3 Pages
-
MSE100 Series
3 Pages
-
DFX II Series
5 Pages
-
DFS II Series
8 Pages
-
DG Series
5 Pages
-
LD Brochure
12 Pages
-
Model 329 Compact Load Cell
3 Pages
-
Chatillon DPPH Series
2 Pages
-
Universal Material Tester
2 Pages
-
Portable Bench Beam Scales
2 Pages
-
7-inch Dial Hanging Scales
2 Pages
-
Mechanical Dynamometer
2 Pages
-
Drill Chuck
1 Pages
-
3-Point Bending Jig
1 Pages
-
Circular Adhesive Plates
1 Pages
-
Mechanical Force Tester
2 Pages
-
Digital Force Gauge
4 Pages
-
Mechanical Force Gauge
2 Pages
Archived catalogs
-
Chatillon Scales Product Catalog
52 Pages