ACCURACY - GAUGE PRESSURE PANEL MOUNT FLANGE MAX PANEL THICKNESS 11.7 (0.46) Standard Accuracy Version 0 to 40% of Range: ± (0.02% of Full Scale*) 40% to 110% of Range: ± (0.05% of Reading) Vacuum: ± (0.25% of Full Scale**) -S5 Accuracy Option Vacuum to 110% of Range: ± (0.05% of Full Scale*) -S2 Accuracy Option Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. PORT POSITION FOR -F4 AND -RP OPTIONS All models indicate vacuum, but vacuum specification applies to 1 bar, 2 bar, 7 bar, 20 bar, and 30 bar models only, and includes vacuum calibration points. *Full Scale is 100% of the range Vacuum to 110% of Range: ± (0.02% of Full Scale*) SENSOR DIAPHRAGM SURFACE ACCURACY - ABSOLUTE PRESSURE 1,1 barA Range -S5 Option: ± (0.05% of Full Scale*) 10 and 30 barA Range 0 to 40% of Range: ±(0.02% of Full Scale*) 40% to 110% of Range: ±(0.05% of Reading) Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. 1,1 barA Range Only available with -S5 accuracy option. -S5 Option: ± (0.05% of Full Scale*) Calibrated in Vertical Orientation. Orientation Effect = ± 0.0003 bar. 1 barA to 40% of Range: ±(0.02% of Full Scale*) 40% to 110% of Range: ±(0.05% of Reading) 1/4 INCH MNPT ADAPTER 1/4 INCH MBSP ADAPTER Easily switch between gauge (sealed gauge) and absolute pressure measurement. -S2 Option: ± (0.02% of Full Scale*) ADDITIONAL SENSOR LENGTH WITH OPTIONAL FITTING ADAPTERS 70 barA Ranges and Above All models indicate pressure from 0 barA to Full Scale, but are only specified from 1 barA to Full Scale. *Full Scale is 100% of the range. -S2 Option: ± (0.02% of Full Scale*) -S5 Option: ± (0.05% of Full Scale*)

OPERATING TEMPERATURE Temperature Range: -20 to 50° C (-4 to 122° F) Single Line Display: 17 mm (0.68") high Dual Line Display: Main Display: 16.8 mm (0.66") Secondary Display: 7.1 mm (0.28") Fully temperature compensated temperature range. No change in accuracy over the specified temperature range. LCD readable in all conditions with two level backlight. PSV mode is for Pressure Safety Valve testing. Configure using CrystalControlWeb. (Configuration is available at crystalcontrolweb.com. ) Display Rate: 4 readings/second (standard) POWER / COMMUNICATION 3 x AA: 1500 hours, typical* Ultra Low...

| DATALOGGING Capacity: Storage Type: Minimum Interval: Maximum Interval: Transfer Rates: Greater than 200M data points Non-volatile flash memory 5 Hz / five per second 24 hours USB 5-10x faster than Bluetooth The One-Time Upgrade purchase allows the XP3i to log readings. This may be purchased at the time of order, or an upgrade package may be purchased afterwards. Additional data features, and a demonstration mode are available at the link below: Crystal Control®Web |SENSOR Wetted Materials: (wrench tight) 316 stainless steel (finger tight) 316 stainless steel and Viton® (internal o-ring) Diaphragm...

XP3i Pressure Gauge bar| RANGE & RESOLUTION TABLES Gauge Pressure Display Resolution SAMPLE PART NUMBERS AMETEK offers a variety of solutions for pressure generation and measurement. Our line of products for pressure generation includes everything from small pneumatic hand pumps to a precision, hydraulic pressure comparator capable of generating up to 15 000 psi / 1000 bar / 100 MPa. All of our pumps may be ordered as part of a Pump System, complete with an XP3i and delivered in a sturdy carrying case with custom insert. * Refer to the following page for a more detailed description of each pump...

PUMP SYSTEMS OVERVIEW Pump System Case Options Part Number Pressure Range Hand Pump Included Pump Waterproof (Pelican Case) ametekcalibration.com © 2024 Crystal Engineering Corporation 708 Fiero Lane, Suite 9, San