XP2i Digital Pressure Gauge psi Data Sheet
5Pages

{{requestButtons}}

Catalog excerpts

XP2i Digital Pressure Gauge psi Data Sheet - 1

XP2i Pressure Gauge  psi  ACCURACY 0 to 20% of Range: ±(0.02% of Full Scale) 20% to 110% of Range: ±(0.1% of Reading) Vacuum: ±(0.25% of Full Scale*) * Full Scale = -14.5 psig OPERATING TEMPERATURE Single Line Display: 16.9  (0.67") high mm Dual Line Display: Main Display: 13.9 mm (0.55") Secondary Display: 5.3 mm (0.21") Display Rate: 4 readings/second (standard) 8 readings/second (PSV mode) PANEL MOUNT FLANGE MAX PANEL THICKNESS 11.7 (0.46) Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. All models indicate vacuum, but vacuum specification applies to 15 psi, 30 psi, 100 psi, and 300 psi models only. PORT POSITION FOR -F4 AND -RP OPTIONS Not recommended for continuous use below -14.5 psi. Refer to XP2i-DP data sheet for gauges that are intended for continuous high vacuum use. 300 PSI Non-condensing. No change in accuracy over operating temperature range. Gauge must be zeroed to achieve rated specification. LCD readable in sunlight with bright backlight. PSV mode is intended for Pressure Safety Valve testing, and requires software to enable. (ConfigXP is a free download from XP2i.com.) SENSOR DIAPHRAGM SURFACE 23.6 (0.93) 1/4 INCH MBSP ADAPTER ADDITIONAL SENSOR LENGTH WITH OPTIONAL FITTING ADAPTERS 4533 . L  XP2i psi Data Sheet Page 1 of 5

Open the catalog to page 1
XP2i Digital Pressure Gauge psi Data Sheet - 2

XP2i Pressure Gauge  psi  POWER The XP2i is Intrinsically Safe only if powered by one of the following battery types. Approved Battery Type Rayovac Max Plus 815 Energizer E91 Energizer EN91 Duracell MN1500 Approved Battery Type Rayovac Max Plus 815 This product conforms to: EN 60079-0: 2009  |  EN 60079-11: 2012  |  EN 60079-26: 2007 Ex ia IIC T4/T3 Ga IECEx FTZU 12.0009X This product conforms to: IEC 60079-0: 2011  |  IEC 60079-11: 2011-06  |  IEC 60079-26: 2006 Exia Intrinsically Safe and Non-incendive for Hazardous Locations: Class I, Division 1, Groups A, B, C and D, Temperature Code T4...

Open the catalog to page 2
XP2i Digital Pressure Gauge psi Data Sheet - 3

XP2i Pressure Gauge  psi  ENCLOSURE Weight includes batteries. Housing: Diecast aluminum Nickel plating over low copper, marine grade aluminum. Keypad and Labels: UV Resistant Polyester LCD protected from impact damage by 1.5 mm (0.06") thick polycarbonate lens under polyester window. Skydrol® compatible. Wetted Materials: (wrench tight) 316 stainless steel For hazardous location product warnings, refer to the operation manual. All welded, with a permanently filled diaphragm seal. (finger tight) 316 stainless steel and Viton® (internal o-ring) Metal to metal cone seal; O-ring can be removed...

Open the catalog to page 3
XP2i Digital Pressure Gauge psi Data Sheet - 4

XP2i Pressure Gauge  psi  RANGE & RESOLUTION TABLE Display Resolution ORDERING INFORMATION Dual Display Adapter Type Connection Location Bottom. . . . . . (omit) Pump System** Carrying Case~ Full . . . . . . . (omit) Aluminum . . . . (omit) System B (pneumatic) -25 inHg to 30 psi. . . . . . . . . . . . . . . . . . . . . . . -BXX SAMPLE PART NUMBERS 300PSIXP2I. . . . . . . . . . . . . . . . . . . . . . . . . . . 300 psi standard gauge, with a 1/4” NPT pressure fitting. 5KPSIXP2I-BSP-DL. . . . . . . . . . . . . . . . . . . 5000 psi gauge, with a 1/4” BSP pressure fitting and Data-logging....

Open the catalog to page 4
XP2i Digital Pressure Gauge psi Data Sheet - 5

XP2i Pressure Gauge  psi  PUMP SYSTEMS All pump systems for the XP2i include 1/4 NPT and BSP female fittings and a carrying case with custom insert. Additional fittings and accessories included with individual systems are listed below. Protect your XP2i even more from harsh environments with our form fitting chemical resistant thermoplastic boot (Skydrol fluid compatible). MPH-1 hose, bonded seals, o-ring kit, and teflon tape. XXSystems B… BXX (T-965), BHX (T-975-CPF) AC Adapter Kit P/N 2984 For continous use applications without battery replacement concern. MPH-1 hose, bonded seals, o-ring...

Open the catalog to page 5

All Ametek Calibration catalogs and technical brochures

  1. PTC series

    14 Pages

  2. RTC series

    15 Pages

  3. PK II

    3 Pages

  4. ATMi

    7 Pages

  5. HPC50

    6 Pages

  6. CrystalCalHP

    7 Pages

  7. m1M Manual

    4 Pages

  8. 30 Series

    4 Pages

  9. FastCalXP

    9 Pages