nVision Lab Reference Recorder
7Pages

{{requestButtons}}

Catalog excerpts

nVision Lab Reference Recorder - 2

Your Multi-Purpose Lab Reference All of the nVision Features in an Enclosure Suitable for a Workshop or Laboratory Environment. HE CRYSTAL nVision Lab Reference is a pressure reference re- corder accurate enough to function as a laboratory deadweight tester Easily accessed mini-USB port. Large, backlit display. replacement and a high-accuracy, high-frequency chart recorder. Download data as you test, view your data on the built-in LCD, and store up to 1 million data points. Key Features  High Accuracy Intuitive keypad takes seconds to learn.  Multiple Measurement Options Pressure,...

Open the catalog to page 2
nVision Lab Reference Recorder - 3

Pressure Module (PM) Measure, calibrate, and record up to 15 000 psi with up to 0.025% of reading accuracy, in the field. Temperature Module (RTD100) Works with 2-, 3-, and 4-wire Pt100 RTDs. Includes an IP67 rated, M8 connector terminal block. Current, Voltage, and Switch Test Module (MA20) Measures 4-20 mA and 10-50 mA loops, DC voltage, and switch state. Each MA20 module comes with a super flexible, silicone 2mm test lead kit. TEST & CALIBRATION INSTRUMENTS

Open the catalog to page 3
nVision Lab Reference Recorder - 4

Bench Top or Rack Mount Applications  Calibrate pressure transducers, switches, transmitters, and gauges. Crystal Pressure Fittings are machined  Calibrate natural gas correctors and flow computers. in high-strength 316 Stainless Steel to  Pressure relief valve testing.  Leak testing with simultaneous graphing of pressure and temperature.  Temperature monitoring and recording.  Purpose designed for testing and calibration.  Self-venting weep hole alerts you before you disconnect from a pressurized system.  2 seals: Use fingers for an o-ring seal, or a wrench for a metal to metal...

Open the catalog to page 4
nVision Lab Reference Recorder - 5

Multiple Data Views Visualize Your Data View data from each module separately, or combine the data from both modules into one graph. See Changes As You Record Examine your data graphically while you record your test. Temperature Zoom and Pan Across Data Take a closer look. Use the arrow keys to inspect the details of your last data run. Original View

Open the catalog to page 5
nVision Lab Reference Recorder - 6

Your Device, Your Way CrystalControl software is available as a free download at crystalengineering.net/nvisionlab ◄ Customize, secure, and configure your nVision with the included CrystalControl software. Access, view, and export your data with DataViewer. ► Customizable Screens Sort, enable, and assign numbers to screens to match the way you work. ► Custom Units Disable the units you do not need and define a custom unit for your application. I o | B ||^| Update Gauge Too'! • Model IIV Serial Number oooooo Admm Password Set Password Screen Lock Password: Set Password Message...

Open the catalog to page 6
nVision Lab Reference Recorder - 7

Crystal products include a factory calibration report that proves it meets its specifications over the operating temperature range. The products described herein, are calibrated in Crystal’s accredited Calibration Lab (A2LA, Certificate #2601.01 ISO/IEC 17025) in an environmental chamber using fully automated equipment. Inclusion of the ILAC-MRA symbol does not imply certification or approval of the product itself, but rather refers to Crystal’s accreditation as a calibration facility. Singapore Tel +65 6484 2388 jofra@ametek.com USA, Florida Tel +1 (800) 527 9999 cal.info@ametek.com China,...

Open the catalog to page 7

All Ametek Calibration catalogs and technical brochures

  1. PTC series

    14 Pages

  2. RTC series

    15 Pages

  3. PK II

    3 Pages

  4. ATMi

    7 Pages

  5. HPC50

    6 Pages

  6. CrystalCalHP

    7 Pages

  7. m1M Manual

    4 Pages

  8. 30 Series

    4 Pages

  9. FastCalXP

    9 Pages