ACCURACY – 3 YEAR RECOMMENDED CALIBRATION INTERVAL 0 to 20% of Range: ±(0.05% of Full Scale) 20% to 110% of Range: ±(0.25% of Reading) Vacuum: ±(0.5% of Full Scale*) * Full Scale = -14.5 psig / -1 bar / -0.1 MPa OPERATING TEMPERATURE Screen: 5 digits, 16.8 mm (0.66") high Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for three years. All models indicate vacuum, but vacuum specification applies to 300 psi / 20 bar / 2 MPa models only. Not recommended for continuous use below -14.5 psi. Refer to XP2i-DP data sheet for gauges that are intended for continuous high vacuum use. Non-condensing. No change in accuracy over operating temperature range. Gauge must be zeroed to achieve rated specification. LCD readable in sunlight with bright backlight. SENSOR DIAPHRAGM SURFACE Display Rate: 4 readings/second POWER 2 x AA: 900 hours, typical Extended Battery Life: 1 reading/15 seconds: 3,000 hours Uses 2 alkaline AA (LR6) batteries. Use of backlight reduces operating time. Extended battery life is keypad selectable. Do not overtighten rear cover when replacing batteries. 1/4 INCH MNPT ADAPTER 1/4 INCH MBSP ADAPTER ADDITIONAL SENSOR LENGTH WITH OPTIONAL FITTING ADAPTERS

m1M Pressure Gauge |ENCLOSUREWeight: 331 g (11.7 oz) Rating: IP65 Weight includes batteries and protective boot. Water resistant housing incorporating o-ring seals [IEC 60529]. LCD protected from impact damage by polycarbonate lens under polyester window. Skydrol® compatible. mIM complies with the Electromagnetic Compatibility and Pressure Equipment Directives. Refer to the EC Declaration of Conformity for specific details. |SENSOR Wetted Materials: (wrench tight) 316 stainless steel Diaphragm Seal Fluid: Silicone Oil mIM is approved for use as a portable test instrument for Marine use and complies...

m1M Pressure Gauge| RANGE & RESOLUTION TABLE 3KPSI Display Resolution

BHM Maritime System: Coiled Hose with 1/4" NPT F connection, adapter to 1/4" BSP F, M1M connection fitting, bonded seals, o-ring kit, and rugged carrying case. BHX Quick Test CPF System: CPF hose with 1/4" NPT F and 1/4" BSP F adapters, M1M connection fitting, bonded seals, o-ring kit, and a rugged carrying case. CXM Maritime System: Standard hose with 1/4" NPT F connection, adapter to 1/4" BSP F, M1M connection fitting, bonded seals, o-ring kit, and rugged carrying case. CXX Quick Test CPF System: CPF hose with 1/4" NPT F and 1/4" BSP F adapters, M1M connection fitting, bonded seals, o-ring...