ACCURACY • PRESSURE MEASUREMENT psi (Gauge Pressure) X 18 to 28° C 0 to 30% of Range: ±(0.01% of Full Scale) 30 to 110% of Range: ±(0.035% of Reading) Vacuum* : ±(0.05% of Full Scale**) X -20 to 50° C 0 to 30% of Range: ±(0.015% of Full Scale) 30 to 110% of Range: ±(0.050% of Reading) Vacuum* : ±(0.05% of Full Scale**) mA CONNECTIONS Ø 4 mm SHIELDED BANANA JACKS Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. All models indicate vacuum, but vacuum specification applies to 30, 100, and 300 psi models only. REMOTE PRESSURE MODULE CONNECTION Not recommended for continuous use at high vacuum. Refer to XP2i-DP data sheet for gauges that are intended for continuous high vacuum use. The BARO option allows you to toggle between gauge and absolute pressure. * Applies to 300 psi and lower ranges only. Vacuum Range = -14.5 psi. ** Full Scale is the numerical value of the positive pressure range. SENSOR DIAPHRAGM SURFACE 300 PSI psiA (Absolute Pressure with BARO Option) All absolute accuracies are equivalent to the gauge pressure accuracies, except as noted below. 30 psi Range: Gauge Accuracy + 0.005 psiA 100 psi Range: Gauge Accuracy + 0.002 psiA PRESSURE MODULES WeADVANCED offer a range of fully calibrated Advanced Pressure Modules to supplement the HPC40 Series’ built-in pressure sensors. Full scale pressure range is from 30 to 15 000 psi, with accuracies from ± 0.025 % rdg, and fully temperature compensated from -20 to 50 °C. 1/4 INCH MNPT ADAPTER 1/4 INCH MBSP ADAPTER ADDITIONAL SENSOR LENGTH WITH OPTIONAL FITTING ADAPTERS APM CPF Series Pressure Modules

HPC40 Series Calibrator psi| DIFFERENTIAL PRESSURE The Tare function can improve differential pressure measurement uncertainties. Requires the use of an equalizing valve. Full Scale Range of Both Sensors The Greater of (+/-) ► Without tare function: STANDARD DELIVERY_ • ISO 17025 Accredited Calibration Certificate, NIST Traceable • Your choice of adapters (NPT, BSP, and M20) • Protective Boot • Test Leads, red and black with clips • Velco strap • User manual • Mini-USB Cable COMPLEMENTARY PRODUCTS_ ±(0.05% of static line pressure reading) Wetted Materials: (wrench tight) 316 stainless steel (finger...

| CURRENT & VOLTAGE MEASUREMENT Connection: 4 mm jacks Maximum Voltage: 45 VDC Current (mA) Input Accuracy: mA Range: Percent Range: Max Allowable Current: Input Resistance: Voltage Burden @ 20mA: Voltage Burden @ 50mA: HART Resistor: Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. Inputs protected by a resettable fuse. mA can be displayed as a percentage, where 0 to 100% corresponds to either 0 to 20,4 to 20, or 10 to 50 mA. Jacks are compatible with safety sheathed banana plugs. Current (mA) Output Accuracy: Range: Step Time: Ramp Time:...

HPC40 Series Calibrator psi | TEMPERATURE MEASUREMENT Accuracy: ±(0.015% of rdg) + 0.02 Ohm 0 - 400 Ohms 0.01 on all scales°C, K, °F, R, O0.003850 0/0/°C (IEC 60751) Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. To order a non-calibrated sensor from -45 to 150 °C, order part number 127387. To order a system calibrated sensor, see the Ordering Information table on page 6. 2-, 3-, and 4-wire supportLemo Plug, 1S Series, 304 insert configuration The proper selection of the RTD sensing element is very important as the error associated with...

HPC40 Series Calibrator psi Type HPC40 Series complies with the Electromagnetic Compatibility and the Pressure Equipment Directives. HPC40 Series complies with the Australian Radiocommunications (Electromagnetic Compatibility) Standard 2008. Battery Life: >12 hours non-sourcing >8 hours when sourcing 12 mA Recharge Time: 16 hours* (Using Eneloop 2100 mA * Charging is done through USB , except when supplying loop Uses 4 alkaline AA (LR6) batteries. Housing: Machined Aluminum Keypad and Labels: UV Resistant Silicone Weight is for dual sensor model with protective boot installed. LCD protected from...

HPC40 Series Calibrator psi | RANGE & RESOLUTION TABLE Display Resolution (Add one digit of resolution for differential mode.) rCPF Adapter Fitting is not included. | ORDERING INFORMATION Number of Sensors 1st Pressure 2nd Pressure Range P/N Range P/N Sensors include 17025 System Calibration Certificate. Single Sensor (1000 psi) HPC40 with a 1/4" NPT pressure fitting. ~ The Waterproof Case is an option for Systems A, B, and C only. HPC42-3KPSI-10KPSI-BARO-BSP-T3 ... Dual Sensor (3000 psi/10 000 psi) HPC40 with the BARO option, a 1/4" BSP pressure fitting, and STS050 Probe temperature sensor....

| PUMP SYSTEMS OVERVIEW HPC40 Series Calibrator psi Case Options II Aluminum Waterproof (Pelican Case) © 2021 Crystal Engineering Corporation 708 Fiero Lane, Suite 9, San Luis Obispo, California 93401-8701 5487.H 2102 • HPC40 Series psi AMETEK Page 7 of 7 sensors, test & calibration