Digital Temperature Indicator and STS Reference Sensors SENSORS, TEST & CALIBRATION

Wide Temperature Range Improve your Accuracy The DTI-1000 with a STS-probe is a fully traceable thermometer recommended as the reference instrument to verify the true temperature in any type of temperature calibrator, liquid bath, or dry-block calibrator. DTI-1000: -200 to 750°C STS-050: -50 to 400°C STS-100: -150 to 650°C STS-102: -50 to 155°C Use the DTI-1000 and the STS probes as your working temperature reference in any calibration application or use the set-up directly in custody transfer applications where high accuracy (low uncertainty) means money. Dual Channel Inputs Specify temperature...

Menu / Enter- The MENU/ENTER key includes intelligent prompts that guide the user through setup and operation. This key allows the user to specify measuring units, resolution, sensor identification, and coefficients. On/Off The ON/OFF key automatically initiates a selftest routine and the display indicates tested parameter results plus the date of the last calibration. Reset / Select- The RESET/SELECT key allows the user to enter peakholds and to change settings in the MENU mode. Sensor 1 connections Sensor 2 connections Mode The MODE key allows the user to specify temperature modes on the dual...

■ ...and even more True Ohm Measurement The DTI-1000 has been designed to employ state-of-the-art DC measuring techniques in combination with powerful microprocessor technology. To achieve high accuracy, the measuring principle used by the DTI-1000 is True Ohm Measurement thus eliminating the EMF from cables, sockets, and sensors. True Ohm Measurement is a proven method to achieve accurate compensation for errors induced by thermal effects. The resistance is measured through the 4-wire system at 1 mA, after which the instrument takes a reading without any applied current; this second reading...

*for accuracies in °C and °Fplease see table Battery Life Typically 15 hours Shipping Weight incl. standard accessories and carrying case Mains specifications Termination____Goldplated LEMO/4mm banana test sockets

STS Superior Temperature Reference Sensors STS-050 Delivered in a cardboard box STS-100 Delivered in aluminium protection case All sensors (except STS050) are supplied with an accredited certificate stating the sensor coefficients. Excluding sensor drift Including sensor drift after 100 hours at max. temperature times, low immersion depths, compact physical temperatures. These are all important considerations when selecting a reference sensor. All sensors are supplied with a certificate stating the sensor coefficients. 1 Specified at 95% confidence interval k=2 over full range, including calibration...

Functional Temperature Range STS-050 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-50 to 400°C STS-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -150 to 650°C STS-102 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-50 to 155°C Accuracy, 12 months use STS-050 Hysteresis3) @0°C/32°F . . . . . . . . . . . . . . . . . . . . . . . 0.01°C / 0.02°F Long Term Stabilty4) @0°C/32°F . . . . . . . . typ. 0.014°C / 0.025°F Repeatability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.005°C / 0.009°F...

^ Base Model Number Calibration Certificate C Carrying Case, aluminium JOFRA Icalibration Mt\ VMETEIT Standard Delivery DTI-1000 ■ DTI-1000 Indicator ■ USB containing manual and JOFRACAL software ■ Accredited Calibration Certificate AMETEK SENSORS, TEST & CALIBRATION

Base Model Number STS050 Pt100 reference probe w/ handle, -50 to 400°C / -58 to 752°F Base Model Number STS102 Diameter of the sensor A Overall diameter 4 mm / 0.16 in Shape and length 250 Straight, 250 mm / 9.8 in, incl. cardboard box 350 Straight, 350 mm / 13.8 in, incl. cardboard box Shape and length 030 Short sensor 30 mm / 1.18 in, incl. plastic case Cable length and termination Cable 1 m / 3.3 ft + LEMO connector S Cable length and termination Cable 1 m / 3.3 ft plus LEMO connector G 4mm STS-050 A reference sensor, 250 mm straight sensor, 1m cable plus LEMO connector, 4mm STS-102 A reference...

EN ISO/IEC 17025 Laboratory accreditation 124716 . . . 4 x 1.5 Volt rechargeable batteries (requires 8 batteries) 124718 . . . Charger for rechargeable batteries - 115/230VAC 124944 . . . Carrying case AMETEK Sensors, Test & Calibration has two 124315 . . . Removeable trolley for carrying case EN ISO/IEC 17025 accredited laboratories that issues accredited certi 125002 . . . Edgeport Converter with 4 pcs of RS232 ports in accordance with international standards. Laboratory accreditation is a reliable indicator of technical competence assuring customers the most accurate documentation. We believe...