Crystal Pressure Fittings  CPF  Common Specifications (applies to all CPF fittings in this datasheet) DESCRIPTION CPF is an improved cone type fitting system that adds a unique o-ring sealing system which permits leak free connections without tools. CPF fittings can be directly connected to ¼” medium pressure cone type fittings from other manufacturers*, provided that wrenches are used to complete the connection. The fittings of the CPF system have been designed and tested to comply with ASME B31.3-2008, Chapter IX: High Pressure Piping. * HiP: 1/4" Female and Male Medium Pressure (LF4 & LM4 series) Autoclave Engineers: 1/4” Female and Male Medium Pressure (SF250CX series) Wrench-tight: -40 to 150°C M inimum Hose Bend Radius: 1.0" (25mm) Non-Crystal MP adapters require wrench tightening. Cone Angle: 60°, nominal Hose is not compatible with dioctyl sebacate fluid. Internal Hose Diameter: 0.08" (2 mm) Hose Weight: 0.0179 lbs/ft (26.6 g/m) CPF Female O-rings: AS568A-012, Viton® 90 O-ring Lubricant: Molykote® 55 CAUTION: To achieve CPF maximum allowable working pressures no o-ring substitutions are allowed. RECOMMENDATIONS Thread Lubricant: Use a process compatible fluid Wrench Torque: 100–140 in-lbs (11.3–15.8 Nm) Tube Fitting Pump Adapter BSP Fittings BSP Fitting Kits M20 Fittings When used with gases, fuels (liquid or gas) and refrigerants, permeation (i.e., seepage) will occur from inside the hose. In enclosed or unventilated spaces this permeation may result in high concentrations of vapors which are potentially flammable, explosive or toxic. Care must be taken to protect hoses from snagging, kinking, bending smaller than the minimum bend radius, and cutting. Any hose that has been damaged in any way should be removed from service and discarded immediately. External Hose Diameter: 0.235" (6 mm) Due to the wide variety of operating conditions it may be subject to, Crystal Engineering, as well as Distributors and Representatives of Crystal products, do not warrant that this hose is suitable for any specific use. This hose is not for use with compressed natural gas (CNG). Fittings: High Strength 316 Stainless Steel Hose: Polyamide core with urethane jacket Transmitter Fittings Note Regarding CPF Hose (MPH-X) NPT Fitting Kits Most fittings thoughout this document meet the MAWP specificaton of 10000 psi / 700 bar / 70 MPa. Exceptions are labeled with an icon ( 1 , 5 , 15 ) and a key to indicate the pressure rating. Click a Category to Navigate to its Page Maximum Allowable Working Pressure (MAWP): 10 000 psi / 700 bar / 70 MPa Quick Links Autoclave Engineers Fluid Components is a division of Snap-tite, Inc. HiP is High Pressure Equipment Company. Molykote is a registered trademark of Dow Corning Corporation. Viton is a registered trademark of DuPont Performance Elastomers. Swagelok is a registered trademark of Swagelok Company. If a torque wrench isn’t practical to use, hand tighten then tighten an additional 20 degrees using a wrench. 4895 . F  Crystal Pressure Fittings Data Sheet Page 1 of 12

Crystal Pressure Fittings  CPF  Quick Links | CPF | NPT | BSP | M20 | Transmitter | Tube | AN4 | Pump Adapter | Non-Crystal Adapters | MPH-100 Includes hose reel option * Option: Integral CPF Hose Reels are portable, with an internal friction brake and a locking mechanism to prevent unspooling. CPF Hose Reels are available for hose lengths from 10 to 50 meters. Hoses must be permanently factory-installed to the Reel using a double-bulkhead fitting. The reel connection is CPF female. 4895 . F  Crystal Pressure Fittings Data Sheet Page 2 of 12

|MALE CONNECTOR Crystal Pressure Fittings CPF Quick Links | C F | NPT | BSP | M20 | Transmitter | Tube | AN4 | PumpAdapter | Non-Crystal Adapters -Weep Hole(s) 4895.F Crystal Pressure Fittings Data Sheet J^IYIETEIC* Page 3 of 12 TEST & CALIBRATION INSTRUMENTS

Crystal Pressure Fittings  CPF  Quick Links | CPF | NPT | BSP | M20 | Transmitter | Tube | AN4 | Pump Adapter | Non-Crystal Adapters | CPF Fittings BULKHEAD MOUNT Weep Hole(s) Part Number Note: Includes bulkhead retainer (Part # 4417). Part Number Part Number Weep Hole 4895 . F  Crystal Pressure Fittings Data Sheet Page 4 of 12

Crystal Pressure Fittings CPF Quick Links | CPF | T | BSP | M20 | Transmitter | Tube | AN4 | PumpAdapter | Non-Crystal Adapters Weep Hole - 4895.F Crystal Pressure Fittings Data Sheet J^IYIETEIC* Page 5 of 12 TEST & CALIBRATION INSTRUMENTS

Crystal Pressure Fittings  CPF  Quick Links | CPF | NPT | BSP | M20 | Transmitter | Tube | AN4 | Pump Adapter | Non-Crystal Adapters | NPT Fittings NPT QUICK TEST MALE ø (C) Part Number Weep Hole Neoprene 70 Replacement O-ring Neoprene 70 Replacement O-ring NPT QUICK TEST FEMALE Part Number Weep Hole Neoprene 70 Replacement O-ring Neoprene 70 Replacement O-ring Neoprene 70 Replacement O-ring Weep Hole (Intended for use with ComboPump) 4895 . F  Crystal Pressure Fittings Data Sheet Page 6 of 12 Part Number

Crystal Pressure Fittings  CPF  Quick Links | CPF | NPT | BSP | M20 | Transmitter | Tube | AN4 | Pump Adapter | Non-Crystal Adapters | NPT Fittings NPT MALE TO NPT QUICK TEST FEMALE Neoprene 70 Replacement O-ring Neoprene 70 Replacement O-ring Part Number (1/8MPT fittings intended for use with ComboPump) (1/4MPT fittings intended for use with HydraulicPump) Part Number Complete NPT Hose and Fitting Kit Includes: 1/8 NPT [Male (2), Male 90°, Male Quick Test, and Female Quick Test], 1/4 NPT [Male (2), Female, Male Quick Test, and Female Quick Test], 1/2 NPT [Female Quick Test], Tube [1/4 Male,...

Crystal Pressure Fittings  CPF  Quick Links | CPF | NPT | BSP | M20 | Transmitter | Tube | AN4 | Pump Adapter | Non-Crystal Adapters | BSP Fittings CPF MALE TO BSP MALE BSP FEMALE Weep Hole Part Number Part Number Part Number Complete BSP Hose and Fitting Kit Includes: BSP Female [1/8, 1/4 (2), 3/8, and 1/2], NPT [1/4 Quick Test Female and 1/8 Male (2)], Transmitter [1/4 Male and 5/16 Male], CPF Connectors [Male-Male, T-Union, Plug, and Cap (2)], Hose [1 meter], Custom Carrying Case. BSP Test Kit 4895 . F  Crystal Pressure Fittings Data Sheet Page 8 of 12