PMi Series Intrinsically Safe Advanced Pressure SENSORS, TEST & CALIBRATION

Your HPC50 Pressure Calibrator Now Measure up to 4 Pressures at Once! HE CRYSTAL APMi intrinsically safe pressure modules, with integrated CPF* female connections offer the functionality and flexibility to read up to 4 pressure inputs with a single HPC50 calibrator. In addition to the two installed modules in the HPC50 Series, two APMi pressure modules can be connected to the device. This provides the flexibility to either expand the range of the HPC50, view all four pressure readings at the same time, or to read two different differential pressures. Crystal APMi offers seamless integration with...

Lab Accuracy in the Field Active Temperature Compensation Count on the same accuracy at any temperature, between -20 and 50° C. Crystal Pressure Fittings are machined in high-strength 316 Stainless Steel to operate to 10 000 psi / 700 bar.  Purpose designed for testing. Calibrate with Confidence Anywhere Take measurements with up to 0.035% of reading accuracy. Crystal Engineering calibration facilities are A2LA accredited, (# 2601.01) which is internationally recognized by ILAC.  Self-venting weep hole alerts you before you disconnect from a pressurized system.  Seamless connection to pneumatic...

Specifications Accuracy psi (Gauge Pressure) XX18 to 28° C 0 to 30% of Range: ±(0.01% of Full Scale) Sensor Wetted Materials. . . . . . (wrench tight) 316 stainless steel (finger tight) 316 stainless steel and Viton® (internal o-ring) (15 psi / 1 bar / 100 kPa) 316 stainless steel and Viton 30 to 110% of Range: ±(0.035% of Reading) Vacuum* : ±(0.05% of Full Scale**) XX-20 to 50° C 0 to 30% of Range: ±(0.015% of Full Scale) 30 to 110% of Range: ±(0.050% of Reading) Vacuum* : ±(0.05% of Full Scale**) * Applies to 300 psi / 30 bar / 3 MPa and lower ranges only. Vacuum Range = -14.5 psi / -1.0 bar...

APMi700BAR-BSP-3M .. .700 bar APMi with a 1/4" BSP male pressure fitting and 3 meter cable. APMi10MPA-M20-10M.. .10 MPa APMi with an M20x1.5 male pressure fitting and 10 meter cable. SENSORS, TEST & CALIBRATION

Accessories and Replacement Parts MPM-1/4MPT CPF Male to 1/4” Male NPT Fitting Included as standard MPM-1/4BSPM CPF Male to 1/4” Male BSP Fitting Included with -BSP MPM-M20x1.5M CPF Male to M20 Male Adapter China, Shanghai Tel +86 21 5868 5111 [email protected] China, Beijing Tel +86 10 8526 2111 [email protected] China, Guangzhou Tel +86 20 8363 4768 [email protected] ametekcalibration.com No part of this document may be reproduced or modified in any form or by any means, electronic or mechanical, without express written permission from Crystal Engineering Corporation....