POWER SUPPLY Remote Power TEST & CALIBRATION INSTRUMENTS

Ideal for Field Use Long lasting, flexible battery options Works with lithium, alkaline, and NiMH rechargeable batteries. Bright multi-function LED alerts Backlit icons indicate a powered loop, depleted batteries, and low voltage. Power Save: Auto-off when you disconnect Power Hold: Auto-on when you re-connect within 30 seconds. Works where you do Operating Temperature: -20 to 50°C (-4 to 122°F). Long Battery Life Battery example: Energizer Ultimate Battery examples: Rayovac Max Plus 815, Duracell MN1500, Energizer E91, EN91 Battery example: Energizer Recharge 9 hours NiMH Low Self Discharge...

Use with a Crystal Calibrator nVision Reference Recorder 30 Series Pressure Calibrator Accurate enough to replace a deadweight tester. Rugged enough to sit in 3 feet of water. Portable enough to complete calibrations anywhere. Its internal sensors give you 0.05% of reading accuracy and resist damage from overpressure. • Gauge / Absolute Pressure Datalogger to • Wide pressure range can measure vacuum and • Differential Pressure with up to 0.025% • Indicates milliamps to calibrate transmitters • Ultra compact and light • Very easy to learn and use • Battery operated • Brings laboratory accuracy...

Output Voltage Ripple: < 14 mV rms Rated Output Current: 25 mA Short Circuit Protection: Continuous Connections: 4mm banana jacks Dimensions: 4.8" x 3.1" x 1.2" Weight: 200 g (0.44 lbs) including alkaline batteries Operating Temperature: -20 to 50°C (-4 to 122°F) Storage Temperature: -40 to 75°C (-40 to 167°F) Operating Humidity: 95% Relative, non-condensing Power Supply: 2 x AA batteries (alkaline 1.5V included) ORDERING INFORMATION P/N 24VDCPS KIT: 24 VDC Loop Power Supply plus the P/N 1351 Test Lead Set P/N 24VDCPS: 24 VDC Loop Power Supply P/N 1351: Test Lead Kit Two 4 mm shrouded banana...