Professional Temperature Calibrator PTC-125 Cooler » Wide temperature range From -90 to 125°C (-130 to 257°F) with our patented heat piping technology. » High accuracy Down to ±0.07°C (±0.013°F) using the external reference sensor. 4-wire True-Ohm-Measurement technology is used » Most stable cooler calibration on the market ±0.03°C (±0.054°F) » Fastest calibration possible The efficient free piston stirling cooler (FPSC) technology is used to secure fast cooling and heating temperature changes » Easy to carry Weighing only 15.2 kg (33.5 lb), the PTC-125 is by far the lightest and most portable cooler on the market » Intelligent reference sensor communication JOFRA reference sensors are supplied with intelligent plugs, holding the calibration data (coefficients) of the reference sensor. This is a truly plug & play calibration system » USB connector for communication All PTC calibrators communicate via an easy-to-use USB port ,ntuitiVe Ca,'brati0n The professional dry-block temperature calibrator - the JOFRA® PTC-125, is a versatile temperature calibrator available with a temperature range that makes it especially ideal for use in the health care, medical, pharmaceutical, biotechnology and food industries. The PTC-125 offers many advantages, such as: • Relevant for many applications With its wide temperature reach, the PTC-125 can be used in many applications where either high heat or low cooling is needed • User friendly Intuitive to use and easy to run, the PTC-125 is equipped with a large informative, easy-to-read color display, which makes reading error a thing of the past • Ergonomically correct Lightweight and easy-to-carry, the PTC-125 is easy to move from job to job • Mechanically stable With its high-tech design the PTC-125 ensures durability and lasting quality The PTC-125 is the newest member of the well-known JOFRA PTC family that can meet any type of industrial temperature calibration need within the -90 to +660°C (-130 to 1220°F) temperature range. ISO 9001 Manufacturer Specification Sheet, SS-PTC-125 AMETEK SENSORS, TEST & CALIBRATION

Standard features Great temperature homogeneity The PTC series of calibrators provides precision temperature calibration of sensors, whatever the type or format. Another PTC feature is the USB connection that facilitates easy communication with the calibration management software JOFRACAL. The USB connection also supports easy download of future firmware upgrades. The JOFRA PTC-series features our well-known active dualzone heating technology. Each heating zone is independently controlled for precision temperature calibration. The homogeneity in the lower part is close to that of a laboratory...

Easy to carry A calibrator is carried from one job to another and therefore it needs to weigh as little as possible. AMETEK has designed the PTC calibrators to be lightweight and easy to carry, without compromising quality, durability or functionality. The PTC-125 weighs only 15.2 kg, making it one of the lightest ultra coolers on the market. SET-Follows-TRUE (Models B & C only) The “SET-Follows-TRUE” mode makes the instrument tune in to the temperature reading of the external reference “TRUE” meets the desired “SET” temperature. This feature is important when it is critical that the temperature...

Optional features Unique reference sensors Optional PTC firmware package, U1 The STS-150 reference sensor is designed with a 90˚-angled rod to fit the calibrator so it is only slightly higher than the top of the PTC calibrator. Optional feature for B model only. See Option U1 in ordering code. The unique design makes it possible to calibrate threaded sensors and sensors with connection heads without any problems. STS-150 reference sensors also alert you when your calibration has expired. Increased capacity with JOFRA ASM Using the PTC series together with the ASM, Advanced Signal Multi-scanner,...

1* When used in the range -90 to 125°C / -130 to 257°F 2* When exposed to 125°C / 257°F for 100 hours. Stability will depend on actual use of the sensor. Standard delivery STS-150 A sensor Plastic protection case Accredited certificate Cable Manual Compatible JOFRA instruments DTI-050 PTC-125 • Professional Temperature Calibrator

Use of other inserts may reduce the performance of the calibrator. To get the best results, the insert dimensions, tolerance and material is critical. We advise using JOFRA inserts, as they guarantee trouble-free operation. Communication interface

PREDRILLED INSERTS FOR PTC-125 All predrilled inserts have holes for: 4 mm reference sensor • %” reference sensor • 3 mm hole for a sensor All inserts are supplied with an insulation plug drilled with the necessary holes. Note 1: Use the insert code, when ordering a JOFRA standard undrilled insert together with the PTC calibrator. Professional Temperature Calibrator • PTC-125

MULTI-HOLE INSERTS FOR PTC-125 - METRIC (MM)All inserts are supplied with an insulation plug drilled with the necessary holes. Spare part no. for multi-hole inserts - metric (mm) Note 1: Use the insert code, when ordering a JOFRA standard multi-hole insert together with the PTC calibrator. Spare part no. for multi-hole inserts - imperial (inch) Note 1: Use the insert code, when ordering a JOFRA standard multi-hole insert together with the PTC calibrator. PTC-125 • Professional Temperature Calibrator

ORDERING INFORMATION Order number Base model number PTC-125 series, -90‘C to 125‘C (-130‘F to 257‘F) Model version Basic model, without input Full model, incl. Reference sensor input, Sensor-under-test input Middle model, incl. Reference sensor input Power supply (US deliveries 60 Hz only) 115VAC 230VAC Mains power cable European, 230V USA/Canada,115V UK, 240V South Africa, 220V Italy, 220V Australia, 240V Denmark, 230V Switzerland, 220V Israel, 230V Insert type and size No insert selected (standard) 1 x Undrilled Insert (Please see Insert selection for code) 1 x Single hole insert (Please see...