m1M Pressure Gauge ACCURACY – 3 YEAR RECOMMENDED CALIBRATION INTERVAL 0 to 20% of Range: ±(0.05% of Full Scale) 20% to 110% of Range: ±(0.25% of Reading) Vacuum: ±(0.5% of Full Scale*) * Full Scale = -14.5 psig / -1 bar / -0.1 MPa OPERATING TEMPERATURE Screen: 5 digits, 16.8 mm (0.66") high Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for three years. All models indicate vacuum, but vacuum specification applies to 300 psi / 20 bar / 2 MPa models only. Not recommended for continuous use below -14.5 psi. Refer to XP2i-DP data sheet for gauges that are intended for continuous high vacuum use. Non-condensing. No change in accuracy over operating temperature range. Gauge must be zeroed to achieve rated specification. LCD readable in sunlight with bright backlight. SENSOR DIAPHRAGM SURFACE Display Rate: 4 readings/second Extended Battery Life: 1 reading/15 seconds: 3,000 hours 6,000 hours 1 reading/30 seconds: Uses 2 alkaline AA (LR6) batteries. Use of backlight reduces operating time. Extended battery life is keypad selectable. Do not overtighten rear cover when replacing batteries. 1/4 INCH MNPT ADAPTER 1/4 INCH MBSP ADAPTER ADDITIONAL SENSOR LENGTH WITH OPTIONAL FITTING ADAPTERS 5526 . A  m1M Data Sheet Page 1 of 4

m1M Pressure Gauge ENCLOSURE Weight includes batteries and protective boot. Water resistant housing incorporating o-ring seals [IEC 60529]. Housing: Polyester/Polycarbonate Blend LCD protected from impact damage by polycarbonate lens under polyester window. Keypad and Labels: UV Resistant Polyester Wetted Materials: (wrench tight) 316 stainless steel (finger tight) 316 stainless steel and Viton® (internal o-ring) Diaphragm Seal Fluid: Silicone Oil Connection: Crystal CPF Female STORAGE TEMPERATURE Skydrol® compatible. m1M is approved for use as a portable test instrument for Marine use and complies...

m1M Pressure Gauge RANGE & RESOLUTION TABLE Display Resolution P/N Refer to the complementary products section on page 4, for additional ranges and accuracies. ORDERING INFORMATION Adapter Type Pump System* Refer * to the following page for a more detailed description of each Pump System. Systems C are delivered without fluid. System B (pneumatic) Maritime Kit – 25 inHg to 580 psi. . . . . -BHM System B (pneumatic) -25 inHg to 580 psi . . . . . . . . . . . . . . . . . . . -BHX System C (oil) Maritime Kit – 0 to 3000 psi. . . . . . . . . . . . . . . . . -CXM System C (oil) 0 to 3000 psi. . . ....

m1M Pressure Gauge PUMP SYSTEMS Protective Boot P/N 3436 (included) BHM Maritime System: Coiled Hose with 1/4" NPT F connection, adapter to 1/4" BSP F, M1M connection fitting, and rugged plastic carrying case. Protect your m1M from harsh environments with our BHX Quick Test CPF System: CPF hose with 1/4" NPT F and 1/4" BSP F adapters, M1M connection fitting, bonded seals, o-ring kit, and a rugged aluminum case. (Skydrol fluid compatible). CXM Maritime System: Standard hose with 1/4" NPT F connection, adapter to 1/4" BSP F, M1M connection fitting, and rugged plastic carrying case. CXX Quick Test...