Digital Temperature Indicator & STS Reference Sensor \METEK’ SENSORS, TEST & CALIBRATION

■What to expectWide Temperature Range Improve your Accuracy The DTI-1000 with a STS-probe is a fully traceable thermometer recommended as the reference instrument to verify the true temperature in any type of temperature calibrator, liquid bath, or dry-block calibrator. DTI-1000: -200 to 750°C STS-100: -150 to 650°C STS-102: -50 to 155°C Use the DTI-1000 and the STS probes as your working temperature reference in any calibration application or use the set-up directly in custody transfer applications where high accuracy (low uncertainty) means money. DTI-1000 accuracy up to ±0.005°C DTI-1000 &...

On / Off_ The ON/OFF key automatically initiates a selftest routine and the display indicates tested parameter results plus the date of the last calibration. Menu / Enter_ The MENU/ENTER key includes intelligent prompts that guide the user through setup and operation. This key allows the user to specify measuring units, resolution, sensor identification, and coefficients. Reset / Select_ The RESET/SELECT key allows the user to enter peakholds and to change settings in the MENU mode. Sensor 1 connections Sensor 2 connections Display Display with 2 * 20 characters, which continuously read out the...

...and even more True Ohm Measurement The DTI-1000 has been designed to employ state-ofthe-art DC measuring techniques in combination with powerful microprocessor technology. To achieve high accuracy, the measuring principle used by the DTI-1000 is True Ohm Measurement thus eliminating the EMF from cables, sockets, and sensors. True Ohm Measurement is a proven method to achieve accurate compensation for errors induced by thermal effects. The resistance is measured through the 4-wire system at 1 mA, after which the instrument takes a reading without any applied current; this second reading is...

*for accuracies in °C and °Fplease see table Battery Life Typically 15 hours Shipping Weight incl. standard accessories and carrying case Termination____Goldplated LEMO/4mm banana test sockets

STS Superior Temperature Reference Sensors STS-100 Delivered in aluminium protection case STS-102 cable sensor -45 to 155°C / -49 to 311°F. . . . . . . . . ±0.040°C / 0.072°F1,2 ±0.070°C / 0.126°F1,3 All sensors are as standard supplied with an accredited certificate stating the sensor coefficients. 1 Specified at 95% confidence interval k=2 over full range, including calibration uncertainty, excluding 1 LSD (last significant digit) Excluding sensor drift 3 Including sensor drift after 100 hours at max. temperature STS-102 Delivered in a plastic protection case To get an ideal reference system,...

Specifications STS-100/102 Physical Specifications Sensing element Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pt100 Nominal resistance @0°C/32°F. . . . . . . . . . . . . . . . . . . . . . . . . 100Ω Temperature coefficient . . . . . . . . . . . . . . . . . . . . α100= 0.00385 1/° Minimum immersion depth STS-100 A (4 mm / 0.16 in). . . . . . . . . . . . . . . . . . . 100 mm / 3.9 in STS-100 B (6.35 mm / 0.25 in) . . . . . . . . . . . . . . . . 110 mm / 4.3 in STS-102 A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....

DTI-1000 indicatorDTI1000A F C ^ Base Model Number Calibration Certificate C Carrying Case, aluminium DTI-1000 A temperature indicator with standard traceable certificate and carrying case Standard Delivery DTI-1000 ■ DTI-1000 Indicator ■ JofraCal calibration software .. ■ AmeTrim to adjust the DTI-1000 ■ RS232 cable, 9 pin adapter ■ 8 batteries ■ User manual ■ Calibration certificate, traceable to int. standards ■ Mains adapter AMETEK SENSORS. TEST 4 CALIBRATION

Accessories STS-100 Base Model Number STS100 Pt100 reference sensor, solid, -150 to 650°C / -238 to 1207°F Diameter of the sensor A Overall diameter 4 mm / 0.16 in B Overall diameter 6.35 mm / 0.25 in Shape and length 250 Straight, 250 mm / 9.8 in, incl. alu case 350 Straight, 350 mm / 13.8 in, incl. alu case 500 Straight, 500 mm / 19.7 in, incl. alu case Cable length and termination Cable 0.5 m / 1.6 ft + LEMO connector A B Cable 2 m / 6.6 ft + LEMO connector C Cable 2 m / 6.6 ft + Banana plug connector Calibration certificate H Accredited certificate - ISO17025, Standard -45 to 650°C HL Accredited...

Accessories - DTI-1000 124716 .. .4 x 1.5 Volt rechargeable batteries (requires 8 batteries) 124718 ... Charger for rechargeable batteries - 115/230VAC 124944 ... Carrying case 124315 ... Removeable trolley for carrying case 125002 ... Edgeport Converter with 4 pcs of RS232 ports 124720 ... Mains adapter 9VDC/200mA - 230VAC/115VAC # DANAK CAL P'v.Hu ^ ENISO/IEC 17025 Laboratory accreditation AMETEK Sensors, Test & Calibration has two EN ISO/IEC 17025 accredited laboratories that issues accredited certificates in accordance with international standards. Laboratory accreditation is a reliable indicator...