Test Benches Catalogue AMET designs and provides equipment, automation systems and test benches for physical testing and characterization of mechanical and mechatronic products. Among our testing products, there are vehicle closures fatigue test benches, designed for side doors, trunk lids, hoods, tailgates, for passenger cars and commercial vehicles, usable in climate room over a wide temperature and humidity range, according to OEMs requirements. AMET also designs and realizes end of line test benches, on-board devices and quality rigs, collaborative robot's applications, fluidic tests equipment (e.g. Gasoline Working Capacity GWC) and custom solutions according to specific requirements. Reliability, low maintenance and ease of use are the strengths that our customers recognize even thanks to our control software, entirely developed by AMET. We use the best automation technologies to perform millions of cycles at extreme temperatures and humidity and to always offer our customers the best. Side door test bench Industry 4.0 compliant test bench to simulate human behaviour to open and close side doors from outside and inside, for passenger or commercial vehicles. Adaptable to any closure handles and unlocking mechanisms, benches work from -40°C to +90°C with 95% R.H. Electronic control with brushless motors ensure reliability, precision, accuracy. Ergonomic console and user-friendly interface simplify bench setting. Possibility to test the single component: External handle Electric window lift Door lock Hinges Tie rod/Limiter Window Window outline gasket Door ring gasket Door panel (handle, armrest, return handle, storage pockets) External moldings

Tailgate Sliding side door Trunklid Swing rear door Test benches to simulate human behaviour to open and close Sliding side door, Swing rear door, Trunklid, Hood or Tailgate both for passenger or commercial vehicles. Adaptable to any closure handles and unlocking mechanisms, bench works from -40°C to +90° C with 95% R.H. Electronic control with brushless motors ensure reliability, precision, accuracy. Ergonomic console and user-friendly interface simplify bench setting. Most of closures opening mechanisms supported Capability to set opening and closing component speed, delay before movements,...

Sunroof Internal finishes Industry 4.0 compliant test bench to test and/or characterize passenger or commercial vehicle interiors. Deployed with up to four cylinders or robotic/cobotic solutions, benches works from -40°C to +90°C with 95% R.H. Electronic control with brushless motors ensure reliability, precision, accuracy. Ergonomic console and user-friendly interface simplify bench setting: users can customize axis sequences. Possibility to test the single component dashboard body (included touch screen) glove compartment defroster vents glove drawer glove compartment door air vents steering...

Fully configurable test bench Up to 4 linear actuators with or without load cells Fatigue and characterization vehicle parts Independent or coordinated movements Capability to work from –40°C to +90°C with 95% of humidity Usable for different passenger cars and commercial vehicles Capability to monitor applied forces Capability to customize movement sequences Capability to set linear actuators speed, delay before movements, maximum allowed force Report generation capability Gear stick gaiter fatigue test bench Free gear sequence definition Most of gear knobs supported with different reverse inhibitor...

End-of-line testing End of line vehicle closures closing force measurement Controlled dynamometer for closing force measurement Usable for different passenger cars and commercial vehicles Capability to monitor applied forces to detect locking force peak Customizable vehicle database Bar code VIN acquisition for automatic bench settings Report generation capability Steering wheel centering/torque test CAN based acquisition system Automatic test result generation according to the car-maker norms Independent or coordinated movements Capability to work from –5°C to +45°C Usable for different passenger...

Customized Test Bench Realized on customer specifications Examples: Traction bumper Fuel supply unit External powl Internal pawl and steering lock Motorcycle components with Cobot Aeronautical seat table Railway connection cable Designed on customer specification, it can operates for millions of cycles and thanks to our control software totally customizable and easy to use, you can minimize the tests setting time and increasing the productivity. AMET S.r.l. Via Livorno, 60 - 10144 Torino - ITALY Web: www.amet.it – E-mail: [email protected]

AMET Control Software It is the software for data acquisition and motion control, fully configurable and custamizable for every use: Durability tests Characterization End of line validation The human machine interface has a user-friendly design which doesn't require computer's skills. Key points are:  Managing of number of cycles, force and speed limits, events history (alarms, status, etc), test stop and restart strategies  Graphical definition of the sequence of actions for each test cycle  Managing of paramenter sets depending by climatic chamber temperature  Hardware interface and test...

Test Benches Catalogue MILLIONS OF CYCLES HIGHLY CUSTOMIZABLE PROPRIETARY CONTROL SOFTWARE CLIMATE CHAMBER AND SOLAR RADIATION FOR ENTIRE SYSTEM OR ONLY COMPONENT RAPID MAINTENANCE INTERVENTIONS Fatigue & Durability Test Benches names AMET-TB Side door AMET-TB Hand brake lever gaiter AMET-TB Sliding side door AMET-TB Grab handles AMET-TB Swing rear door AMET-TB Pedals AMET-TB Tailgate-Hood-Trunk AMET-TB Shift fork AMET-TB External handle AMET-TB gear lever and bowden cables AMET-TB Electric window lift AMET-TB Quasi Static Closing of doors AMET-TB Side door lock AMET-TB Steering wheel alignment...

AMET is a high-tech engineering company, active in mechatronic products design and testing based in Turin. Our customers are mainly OEMs and Tier1 suppliers of the automotive industry and more broadly industrial customers into aerospace, railway, marine. We are specialists working in close collaboration to offer a comprehensive and professional service. The company skills include mechanics, electronics, automatic controls, software development and their integration. We are specialized in offering different packages of high added value services, each with a dedicated team of specialists, working...