Balancing Machine for Differential Housings Uses same reference dates (journal O.D.) as in the vehicle. Fully automatic processing. Simple repositioning of rollers for high flexibility. Easy operation. Universal application. High precision. Permanent calibration. General view Balancing of car and truck differential housings in high volume production in the automotive O.E.M. and Tier 1 supplier industries. Unbalance correction, depending on specification by: milling on the flange and/or milling on the cage for two plane compensation. Available configurations: Single machine with manual loading (audit), Combination with correction station and automatic loading. Types of loading: Automated with gantry loader, Automated with robot. Horizontal hard-bearing balancing machine for measuring and correcting unbalance in one or two planes. Workpieces supported on horizontally arranged rollers (maximum flexibility, highest precision). Measuring system with overslung or tangential belt drive, depending on the design. Unbalance correction with additional correction unit. Optional swarf removal by suction unit and workpiece specific exhaust hood. Clamping and indexing station Milling on the flange and on the cage All information is subject to change without notice

5 3 Multiole insert gang-type milling cutter 1 Measuring station, 2 Clamping station, 3 Milling unit, 4 Swarf extractor, 5 Hydraulics Width x depth x height Balancing speed, approx. Measuring accuracy Cycle time (at 100 % audit), approx. Loading gantry (L) Loading robot (R) 2 axis milling unit for 2 plane correction Marker unit Interface with host computer Horizontal measuring station with belt drive Milling unit Clamping and indexing station Swarf extraction unit Measuring unit with keyboard and monitor Machine control Safety enclosure: class B as per ISO 7475 Hydraulic unit Hofmann Mess- und...