Balancing Machine for Turbine Stators CVW-B Advantages Measuring and compensation of unbalance in torque converter turbine stators in one plane. Application in series or singlepiece production mainly in the automotive and supplier industries. Unbalance correction by radial drilling in polar or component format. Installation of further drilling units for cycle time reduction without modifications to standard unit. Manual loading gantry or robots, as required Prepared for automation by loading unit. Compact and clean design. Possible integration into a fully automatic production line. Soft-bearing vertical balancing machine for disc shaped rotors. The workpieces are clamped on the measuring spindle with zerobacklash by an expanding sleeve mandrel. For compensation of the unbalance the workpiece is pressed by pressure pad on the external diameter against the drill head. The unbalance is corrected by drilling. The number of drilling cycles depends on the initial unbalance, on the dimension of the compensation bore (bore diameter and drilling depth) and on the allowable residual unbalance (unbalance tolerance). The resulting chips are extracted using an exhaust hood positioned over the drill head. Turbine stator Drilling unit with pressure pad All information without obligation, subject to change without notice

1 Measuring station, 2 Drilling unit, 3 Chip extractor, 4 Switch cabinet Expanding sleeve mandrel Technical data Rotor: Weight Footprint width x depth Balancing speed, approx. External diameter Machine: Width x depth x height 1) Other dimensions on request 2) W/o balancing holder 3) With one unbalance correction and check run Additional drilling units Adjustable drill speed Variable drilling depth Automatic loading Test rotor with calibration weights Report printer Rigid machine frame Measuring system Spindle with holder and drive Drilling unit and pressure pad Chip extractor Protective equipment...