Monitoring Machine Condition Intelligent Balancing Solutions • Data memory integrated • Data acquisition software for trend analysis • Excellent price/ performance • Compact design displacement sensors as option • Condition monitoring of rotating overall vibration and rolling bearing condition units (i.e. pressure, temperature) • Machine monitoring under different operating The compact vibration and rolling bearing monitor VibroGard-R is used example of electric motors, fans or pumps. It can handle different operating conditions, such as machining and idling of a machine Overall vibration vRMS and roller measured and monitored using up to three accelerometers. Other process units can be monitored by attaching the appropriate sensor with an sensor port or using a temperature The limit values to be monitored are respective operating condition. If a limit value is exceeded an alarm optocoupler output. The outputs can be easily connected to a controller (e.g. for alarm or shut-off purposes). stored cyclically at an adjustable interval time or automatically when alarm limits are exceeded. evaluation can be performed using the serial port or a memory card Additional software can be used to chart trends to visually plot the condition. For an in-depth analysis of the failure cause, a frequency spectrum of the vibration signal can Trend analysis

Intelligent Balancing Solutions Technical data Speed range Measuring ranges Rolling bearing condition Process values Inputs (terminal strip) Accelerometer with ICP interface Temperature probe PT 1000, KTY 84 or process unit 0-10 VDC Machine operating condition Trigger signal Outputs (terminal strip) Sensor fault Terminal strip Power supply Status display Protection class Top-hat (DIN) rail (35 mm), control panel Datei Bearbetten Fenster Hilfe Einslellungen vom SiViB lesen Einslellungen ubernehmen Einstellungen an SiViB senden ^iach Intervallzeit SiViB Datum/Zert • Memory card • Null modem cable...