Catalogs >
American Hofmann Corporation >
Machine Condition Monitor VibroGard-M

Machine Condition Monitor VibroGard-M
4Pages

Catalog excerpts

Machine Condition Monitor VibroGard-M - 1

Intelligent Balancing Solutions Monitoring Machine Condition Machine Condition Monitor VibroGard-M • Modular design • Excellent cost performance ratio • Standard sensor interfaces • Compact design • Condition monitoring of machines • rotational speed Overall vibration • Roller bearing condition • Vibration displacement • Process values • Monitoring machines using roller sleeve bearings • Evaluation of relative shaft vibration according to ISO and/or VibroGard-M is a modular machine condition monitoring system. It is configured as a cost effective monitoring solution for specific tasks. Examples of typical applications are at fans, pumps, compressors or machine tools. Modules are available for measuring overall vibration and bearing condition on machines with roller bearings. In addition, absolute and two dimensional, relative shaft machines with sleeve bearings. Modules are available for capturing the axial shaft position and shaft elongation as well as the housing elongation of thermal machines. Additionally the rotational speed as well as other process values The modules feature voltage and constant current outputs that are evaluated by the VibroGard-M limit contact module or a machine controller. Analogue or digital instruments may be used to display All information without obligation, subject to change without notice!

Open the catalog to page 1

Machine Condition Monitor VibroGard-M - 2

Intelligent Balancing Solutions Module set for capturing vibrations and the condition of roller bearings Sensors for monitoring tasks Module dimensions customised to form module sets. They always contain a power supply To perfectly fulfil their monitoring tasks, specifically selected sensors are used for each measuring value (see technical data). These are measuring location and connected Operating instructions • 19" rack mount version • Cabinet mount version • Indicating instruments

Open the catalog to page 2

Machine Condition Monitor VibroGard-M - 3

Technical data - 1 Monitor control unit abs. bearing vibrations Measuring values Condition monitoring Vibration displacement Vibration displacement Vibration velocity Vibration velocity Single channel operation X Vibration acceleration Roller bearing condition Dual channel operation XY Measuring ranges Vibration displacement s Vibration velocity vRMS Vibration acceleration g Roller bearing condition gSp Operating frequency range Vibration displacement Vibration velocity Vibration acceleration Roller bearing condition Outputs 5 kHz - 50 kHz 0-20 (4-20) mA DC, burden < 500 Ohms, 0 to 5 VDC,...

Open the catalog to page 3

Machine Condition Monitor VibroGard-M - 4

Technical data - 2 Monitoring control unit Relative shaft elongation Absolute housing elongation Axial shaft position Measuring values Measuring ranges Displacement 0 - 20 (4 - 20) mA DC, burden < 500 Ohm, 0 to 5 VDC, burden > 2 kOhms -10 to +65 ° C Operating temperature Storage Temperature Relative humidity Voltage supply Power demand Protective rating Transducer Supply module Mains supply Supply voltage 24 VDC Limit contact module Limit contacts 2 Pre and 2 main alarms, 2 Pre and 2 main alarms, 1 Pre and 1 main alarm, quiescent current and quiescent current and quiescent current and load...

Open the catalog to page 4