Intelligent Balancing Solutions Balancing Machine for Aluminium Rims • Modular and compact design • Spare-saving assembly • Short installation and set-up „Hook Machine" (Pick & Place) • Maximum of flexibility and availabi • No need of changeover with other rotor types (mix production) Improvement of quality process due to integrated automatic calibra tion (patent-registered operation) • Automatic type selection (integra- aluminium rims in 1 or 2 planes Static or couple unbalance - single machine (manual loa ding), integrable in robot cell in existing machine lines • Marking of heavy or light point with interface to separate outward • Unbalance detection of aluminium rims without changeover • Hard-bearing measuring system / permanent calibration • Automatic rotor transport with friction rollers • Scanning of distance between "wheel flange" and "lower edge rim" or of wheel offset in the inlet con- veyor (option) • Automatic detection of rim type and position of valve seat by integrated camera system (option) • Integrated marking device (Match- • Ethernet interface to CAQ-System • Profibus interface to conveyor • Coordinated interface to subse- quent geometric station • Additional camera for recording of the number of the coquille cast Mid conveyor-belt with lifting unit Subject to technical alterations!

Intelligent Balancing Solutions 1 inlet 2 lowerable intermediate belt 3 outlet (option) 4 unbalance detection 5 Match-Point marking 6 control cabinet 7 OP camera system Technical Data Diameter of tire fit Inch 13" - 24,5" Size of wrench Inch 3,5" - 13" Length x Width x Height mm 1000 x 1800 x 2100 • Camera system for automatic type • Scanning of wheel flange and wheel offset in inlet-conveyor • Match-Point marking device • Detection of valve seat (bias unba- • Switch-over between static and couple unbalance • Interface to interlinking (Profibus) • Interface CAQ-System (Ethernet) • Interface printer...