Material Safety Data Sheet Fastite 27-A Pipe Joint Lubricant Date of Preparation: August 1998/Revised 4/2006 Section 1 - Chemical Product and Company Identification Product/Chemical Name: Fastite 27-A Pipe Joint Lubricant Chemical Formula: 88-6 Manufacturer: JTM Products, Inc., 31025 Carter Street, Solon, OH 44139, Phone (440) 287-2302, FAX (440) 287-3095 (CHEM-TEL 24-hour emergency: (800) 255-3924) Section 2 - Composition / Information on Ingredients Proprietary blend of soap [CAS#61790-44-1], glycol [CAS#57-55-6]and filler [CAS#12001-26-2]. revised February 2005 - John Cahoon Section 3 - Hazards Identification Emergency Overview Potential Health Effects Primary Entry Routes: Not Hazardous Carcinogenicity: IARC, NTP, and OSHA do not list the ingredients in Fastite 27-A Pipe Joint Lubricant as carcinogens. Section 4 - First Aid Measures Eye Contact: Flush with copious volumes of water for 15 minutes while holding eyelids open. Skin Contact: Wash with water. If irritation persists, call a physician. Section 5 - Fire-Fighting Measures Flash Point: >220 °F (>104 °C) LEL: NA NFPA Flash Point Method: NA, contains water UEL: NA 0 Autoignition Temperature: NA Flammability Classification: 0 0 1 Extinguishing Media: Water, water fog, alcohol foam, carbon dioxide or dry chemical are all suitable. — Unusual Fire or Explosion Hazards: None Hazardous Combustion Products: None Fire-Fighting Instructions: Do not release runoff from fire control methods to sewers or waterways. Fire-Fighting Equipment: Because fire may produce toxic thermal decomposition products, wear a self-contained breathing apparatus (SCBA) with a full facepiece operated in pressure-demand or positive-pressure mode. Section 6 - Accidental Release Measures Spill /Leak Procedures: This product is a biodegradable soap. Containment: For large spills, dike far ahead of spill for later disposal. Cleanup: Place the bulk of any spilled material into drums, then rinse any remaining material to sewage treatment facility, in accordance with any applicable regulations. Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120). Section 7 - Handling and Storage Handling Precautions: No special precautions are required. Storage Requirements: No special precautions are required. Regulatory Requirements: No known regulatory requirement for handling and storage. Section 8 - Exposure Controls / Personal Protection Engineering Controls: Ventilation: Provide general or local exhaust ventilation systems. Administrative Controls: Respiratory Protection: If respirators are used, OSHA requires a written respiratory protection program that includes at least: medical certification, training, fit-testing, periodic environmental monitoring, maintenance, inspection, cleaning, and convenient, sanitary storage areas.

Fastite 27-A Pipe Joint Lubricant Protective Clothing/Equipment: Wear chemically protective gloves to prevent prolonged or repeated skin contact. Wear protective eyeglasses or chemical safety goggles, per OSHA eye- and face-protection regulations (29 CFR 1910.133). Contact lenses are not eye protective devices. Appropriate eye protection must be worn instead of, or in conjunction with contact lenses. Safety Stations: Make emergency eyewash stations, safety/quick-drench showers, and washing facilities available in work area. Contaminated Equipment: Launder before reuse. Remove this material from...