AMERICAN FLOW CONTROL 4 -48 SERIES 2500 TAPPING VALVES FLOW CONTROL

FEATURES AMERICAN provides tapping valves for sizes 4 in.–48 in. rated at 250 psig pressure. The Series 2500 is constructed of ductile iron and rated at 250 psig. The Series 2500 4 in.–48 in. will accept full-size shell cutters. Tapping valves 4 in.–48 in. are furnished with an alignment ring on the end flange which fits into a recess on the AMERICAN Flow Control manufactured tapping sleeve. This fit helps assure proper alignment between the sleeve and valve, which permits passage of the cutter during the tapping procedure. SPECIFICATIONS RESILIENT SEATED TAPPING VALVES Tapping valves shall be...

4"-48" SERIES 2500 TAPPING VALVES SECTIONAL DRAWINGS/DIMENSIONS DIMENSION A B +.000/- .031 C +/- .016 D (Flange End) (TF) (Class 125) E (MJ End) (TM) F G Waterway Diameter No. of turns to open Tap Size MAX. CUTTER DIA. 4 in.–36 in. valves meet or exceed requirements of ANSI/AWWA C515. 4 in.–16 in. valves may be ordered in configurations Ul Listed and Approved by FM Approvals. 18 in.–24 in. valves may be ordered in configurations UL Listed. 4 in. - 48 in. valves have 250 psig ANSI/AWWA rated working pressure. 4 in.–12 in. valves in Listed and Approved configurations have 250 psig UL and FM rated...

SECTIONAL DRAWINGS/DIMENSIONS Maximum Cutter Diameter Weight

4"-48" SERIES 2500 TAPPING VALVES SECTIONAL DRAWINGS/DIMENSIONS SIZE A B C D E F G H J K L T U X Y Turns To Open Tap Size Maximum Cutter Diameter Weight

SECTIONAL DRAWINGS/DIMENSIONS SIZE A B C D E F G H J K L T U X Y Turns To Open Tap Size Maximum Cutter Diameter Weight

4"-48" SERIES 2500 TAPPING VALVES INSTALLATION AND TESTING BALL VALVE INSTALLATION AND TESTING, 14"- 48" SIZES All tapping valves with bevel gears for horizontal installation will be furnished with tapped and plugged holes, a pipe nipple and ball valve for flushing. All tapping valves for vertical installation will have tapped and plugged holes but will not be furnished with pipe nipple for ball valve since flushing should not be necessary for vertical installations. When the valve is installed, the pipe plug on the lower side of the valve body must be removed and the nipple and ball valve installed....

AMERICAN Flow Control Waterous Company P.O. Box 2727 Birmingham, AL 35202-2727 Phone: 800-326-8051 Fax: 800-610-3569 Email: [email protected] 125 Hardman Avenue South South St. Paul, MN 55075-2421 Phone: 888-266-3686 Fax: 800-601-2809 Email: [email protected] Series 2500 Product Video Product literature may become outdated. AMERICAN is not responsible for out-of-date information, errors or omissions. Please contact AMERICAN for the most current product information. EOE/Minority/Female/Veteran/Disability