4"-24" Tapping Sleeves
8Pages

AMERICAN FLOW CONTROL 4"- 24" SERIES 2800 TAPPING SLEEVES

FEATURES/SAMPLE SPECS FEATURES AMERICAN Flow Control offers ductile iron tapping sleeves in sizes 4 in. x 4 in. through 24 in. x 24 in. AMERICAN tapping sleeves are designed to provide an efficient means of connecting branch piping to existing lines without interrupting water service in those lines. The Series 2800 is available in sizes 4 in. x 4 in. through 24 in. x 24 in. with mechanical joint ends for use on cast iron or ductile iron pipe and 4 in. x 4 in. through 12 in. x 12 in. with mechanical joint ends for use on A-C pipe. The Series 2800 sleeves feature full-length, heavyduty...

2800-C SERIES – FOR USE WITH CAST IRON OR DUCTILE IRON PIPE SLEEVE SIZE (PIPE X BRANCH) SLEEVE SIZE (PIPE X BRANCH) A DIA +.031 -.000 B C D DIA E F SLEEVE SIZE (PIPE X BRANCH) A DIA +.031 -.000 B C D DIA E F G (Gasket Thickness). For sizes 4 in. - 12 in. and 16 in. - Two 3/4 in.-thick gaskets that fit ductile iron and centrifugally cast gray iron pipe (AB) are supplied as standard. Two 5/8 in.-thick gaskets should be used for pit cast pipe (CD). If there is a doubt about which type of pipe the sleeve will be used with, order 5/8 in.-thick gaskets in addition to the 3/4 in.-thick gaskets...

DIMENSIONS 2800-C SERIES – FOR USE WITH CAST IRON OR DUCTILE IRON PIPE (CONTINUED) SLEEVE SIZE (PIPE X BRANCH) A DIA +.031 -.000 B C D DIA E F SLEEVE SIZE (PIPE X BRANCH) G (Gasket Thickness) Sizes 14-, 18-, 20- and 24-in. are furnished with two 5/8 in.-thick gaskets for AB pipe only. Notes: 1. Flange pilot dimensions on branch end of Tapping Sleeve front in accordance with MSS-SP-60. 2. Working pressure 250 psig.

DIMENSIONS 2800-A SERIES – FOR USE WITH ASBESTOS CEMENT (A/C) PIPE SLEEVE SIZE (PIPE X BRANCH) A DIA +.031 -.000 B G (Gasket Thickness) Two 3/4 in.-thick gaskets that fit ductile iron and centrifugally cast gray iron pipe are supplied as standard. Two 5/8 in.-thick gaskets should be used for pit cast pipe. If there is a doubt about which type of pipe the sleeve will be used with, order 5/8 in.-thick gaskets in addition to the 3/4 in.-thick gaskets that are furnished as standard. 3/4” Thick Duck Tip Gasket Diameter Circumference 5/8” Thick Plan Gasket Diameter Circumference

Tapping Sleeve Front Cast Ductile Iron Tapping Sleeve Back Cast Ductile Iron MJ Split Gland Half Cast Ductile Iron Plated Steel Plated Steel Cor-Ten Steel Cor-Ten Steel SQ Head Pipe Plug 1/2 NPT

Tapping Sleeve Front Tapping Sleeve Back MJ Side Gasket MJ End Gasket MJ Split Gland Half Hex Head Bolt 3/4-10 x 4-1/2 Hex Head Bolt 5/8-11 x 3 Hex Nut 3/4-10 Hex Nut 5/8-11 T-Head Bolt 3/4-10 T-Head Nut 3/4-10 SQ Head Pipe Plug Hex Head Bolt 1-8 x 4 Hex Head Bolt 1-8 x 13 Hex Nut 1-8 Hex Head Bolt 3/4-10 x 3-1/4 Stud 1-8 x 11 Stud 1-8 x 5-1/2 Stud 1-1/4 - 8 x 11 Stud 1-1/4 - 8 x 6 Hex Nut 1-1/4-8 Cast Ductile Iron Cast Ductile Iron Rubber Rubber Cast Ductile Iron Plated Steel Plated Steel Plated Steel Plated Steel Cor-Ten Steel Cor-Ten Steel Stainless Steel Plated Steel Plated Steel Plated...

AMERICAN Flow Control Waterous Company P.O. Box 2727 Birmingham, AL 35202-2727 Phone: 800-326-8051 Fax: 800-610-3569 Email: afcsales@american-usa.com 125 Hardman Avenue South South St. Paul, MN 55075-2421 Phone: 888-266-3686 Fax: 800-601-2809 Email: afcsales@american-usa.com Tapping Sleeve Product Information Product literature may become outdated. AMERICAN is not responsible for out-of-date information, errors or omissions. Please contact AMERICAN for the most current product information. EOE/Minority/Female/Veteran/Disability