2"-12" Series 2500 Resilient Wedge Gate Valve
12Pages

AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE

DUCTILE IRON OPERATING NUT Provides strength and durability. UPPER O-RING SEALS Helps isolate the lubrication chamber as well as shield the stem from dirt and grit. THRUST WASHERS Minimize operating torque. LOWER O-RING SEAL Seals lubrication chamber. HIGH-STRENGTH BRONZE STEM AND WEDGE NUT (STAINLESS STEEL STEM OPTIONAL) Resists corrosion and abuse. DUCTILE IRON CONSTRUCTION Greater strength, durability, and lighter weight than cast gray iron construction. NUTS AND BOLTS Are Tppe 304 stainless steel for corrosion resistance. 250 PSIG PRESSURE RATING Standard for AWWA and applicable...

2" -12" SERIES 2500 RESILIENT WEDGE GATE VALVE FEATURES/SPECIFICATIONS FEATURES The AMERICAN Series 2500 Ductile Iron Resilient Wedge Gate Valve is designed for use in drinking water, sewage and fire protection systems as well as irrigation and backflow control systems. Triple O-ring Stem Seals Sealing the lubrication chamber is a series of three O-ring stem seals. The O-rings help to isolate the lubrication chamber. Thrust Washers Two thrust washers are used. One is located above and one is located below the thrust collar. The use of thrust washers helps provide easy operation....

DIMENSION A B End to End – MJ/MJ Lay Length – MJ/MJ End to End – FL/FL (Class 125) End to End – FL/FL (Class 250) End to End – TY/TY End to End – FL/MJ (Class 125) End to End – FL/TY (Class 125) End to End – PVC/PVC End to End – Threaded Handwheel Diameter No. of Turns to Open 1. 3 in.–12 in. valves meet or exceed requirements of ANSI/AWWA C515. 2. 2 in.–12 in. valves may be ordered in configurations which are UL Listed and Approved by Factory Mutual Approvals. 3. 2 in.–12 in. valves have 250 psig AWWA rated working pressure. 4. 2-1/2 in.–12 in. valves have 250 psig UL and FM rated working...

2" -12" SERIES 2500 RESILIENT WEDGE GATE VALVE STANDARD 2" NRS PARTS LIST Stainless Steel Ductile Iron Operating Nut, 2” Square Operating Nut, T-Head (Optional) Lower Thrust Washer Rubber O-ring Ductile Iron Ductile Iron Bonnet Gasket Ductile Iron Bronze (Stainless Steel Optional) Resilient Wedge Cast Bronze, Coated with EPDM Rubber Stainless Steel Cast Aluminum Stainless Steel Stainless Steel Stainless Steel Stainless Steel Upper Thrust Washer Stainless Steel

STANDARD 2-1/2" & 3" NRS PARTS LIST Hex Head Bolt, 5/8-11 x 1” Operating Nut, 2” Square Operating Nut, T-Head (Optional) O-ring Lower Thrust Washer Stuffing Box Gasket Hex Head Bolt, 5/8-11 x 1-3/4” Stuffing Box Bonnet Bonnet Gasket Body Stem Resilient Wedge Hex Nut, 5/8-11 Handwheel Hex Head Bolt, 5/8-11 x 2-1/4” Flat Washer, 5/8 UL/FM Label O-ring Spirol Pin, 5/16 x 1-1/2” Upper Thrust Washer Stainless Steel Ductile Iron Rubber Nylon Rubber O-ring Stainless Steel Ductile Iron Ductile Iron Rubber Ductile Iron Bronze (Stainless Steel Optional) Cast Bronze, Coated with EPDM Rubber Stainless...

2" -12" SERIES 2500 RESILIENT WEDGE GATE VALVE STANDARD 4"--8" NRS PARTS LIST REFERENCE NUMBER Hex Head Bolt, 5/8-11 x 1” Operating Nut, 2” Square O-ring Stuffing Box Gasket Hex Head Bolt, 5/8-11 x 1-3/4” Stuffing Box Bonnet Hex Head Bolt, 5/8-11 x 2” Bonnet Gasket Body Stem Wedge Nut Resilient Wedge Hex Nut, 5/8-11 Handwheel Hex Head Bolt, 5/8-11 x 2-1/4” Hex Head Bolt, 5/8-11 x 2-1/2” Flat Washer, 5/8 UL/FM Label O-ring Thrust Washer Wedge Cover Stainless Steel Ductile Iron Rubber Rubber O-ring Stainless Steel Ductile Iron Ductile Iron Stainless Steel EPDM Rubber Ductile Iron Bronze...

STANDARD 10" & 12" NRS PARTS LIST REFERENCE NUMBER Hex Head Bolt, 5/8-11 x 1” Operating Nut, 2” Square O-ring Stuffing Box Gasket Stuffing Box Bonnet Hex Head Bolt, 5/8-11 x 2” Bonnet Gasket Body Stem Wedge Nut Resilient Wedge Hex Nut, 5/8-11 Handwheel Hex Head Bolt, 5/8-11 x 2-3/4” Flat Washer, 5/8 UL/FM Label Hex Head Bolt, 5/8-11 x 1-1/2” Hex Nut, 3/4-10 O-ring Thrust Washer Hex Head Bolt, 3/4-10 x 3” Wedge Cover Stainless Steel Ductile Iron Rubber Rubber O-ring Ductile Iron Ductile Iron Stainless Steel EPDM Rubber Ductile Iron Bronze (Stainless Steel Optional) Bronze Ductile Iron,...

2" -12" SERIES 2500 RESILIENT WEDGE GATE VALVE REFERENCE NUMBER Yoke Nut Stem Nut Handwheel Washer Bonnet Gasket Body Stem & Wedge Assembly Stem Groove Pin O-ring Resilient Wedge Hex Nut, 58-11 Hex Nut, 58-11 Handwheel Handwheel Hex Head Bolt, 58-11 x 2-14” Gland Follower Hex Head Bolt, 58-11 x 2-12” Gland Packing Ring Bonnet Handwheel Nut Square Key ULFM Label Bronze Forging Brass Nylon Rubber Ductile Iron See Below Bronze (Stainless Steel Optional) Stainless Steel Rubber Cast Bronze, Coated with EPDM Rubber Stainless Steel Brass Gray Iron Ductile Iron Stainless Steel Ductile Iron...

REFERENCE NUMBER Stem Nut O-ring Handwheel Washer Stuffing Box Gasket Bonnet Hex Head Bolt, 5/8-11 x 2” Bonnet Gasket Body Stem Wedge Nut Resilient Wedge Hex Nut, 5/8-11 Hex Nut, 5/8-11 Handwheel Groove Pin Hex Head Bolt, 5/8-11 x 2-1/4” Gland Follower Hex Head Bolt, 5/8-11 x 2-1/2” Hex Head Bolt, 5/8-11 x 2-3/4” Gland Packing Ring Yoke UL/FM Label Wedge Cover Bronze Rubber Brass Rubber Ductile Iron Stainless Steel EPDM Rubber Ductile Iron Bronze (Stainless Steel Optional) Ductile Iron Ductile Iron, Encapsulated with EPDM Rubber Stainless Steel Brass Ductile Iron Stainless Steel Stainless...

2" -12" SERIES 2500 RESILIENT WEDGE GATE VALVE REFERENCE NUMBER Yoke Nut Handwheel Washer Stuffing Box Gasket Bonnet Bonnet Gasket Body Stem & Wedge Assembly Stem Wedge Nut Groove Pin O-ring Resilient Wedge Hex Nut, 5/8-11 Hex Nut, 5/8-11 Handwheel Gland Follower Hex Head Bolt, 5/8-11 x 2-1/2” Hex Head Bolt, 5/8-11 x 2-3/4” Gland Packing Ring Yoke Handwheel Nut Hex Head Bolt, 5/8-11 x 4-1/4” Square Key UL/FM Label Hex Nut, 3/4-10 Hex Head Bolt, 3/4-10 x 3” Wedge Cover Bronze Brass Rubber O-ring Ductile Iron EPDM Rubber Ductile Iron Bronze Bronze (Stainless Steel Optional) Ductile Iron...